1.5V voltage regulator module (VRM) DC-DC converter – 100W

2.5V voltage regulator module (VRM) DC-DC converter – 100W

1.8V voltage regulator module (VRM) DC-DC converter – 100W

Modular line cable assembly – 6-conductor, 22AWG, 6POS phone jack – Connects from power interface J4 or PCI J3 to OCP J1-J8

Cable assembly – Flat 10-conductor recepticle – Connects from backplane to OCP

Cable harness assembly – 18AWG, 15-conductor – Connects from power subrack J12 to power interface J6

Cable assembly – 28AWG, 50-conductor – Connects from power subrack J14 to power interface J2, J1

Harness assembly – 8AWG, grounded – Connects from rear of 2p drawer to rear cabinet frame member

Harness assembly – 8AWG, grounded – Connects from PCI drawer to cabinet rail

Harness assembly – 8AWG, grounded – Connects from rear of 2p drawer to rear cabinet frame member

Harness assembly – 8AWG, grounded – Connects from PCI drawer to cabinet rail

IP cable – 8P, 0.4m (1.3ft) long, white/red, 50-OHM – With two VHDM connectors

IP cable – 8P, 1m (3.28ft) long, white/blue, 50-OHM – With two VHDM connectors

IP cable – 8P, 4m (13.12ft) long, black/yellow, 50-OHM – With two VHDM connectors

Cable assembly – 80-conductor cable with two 40-position ATA IDE receptacle connectors

Cable assembly – Flat 80-conductor cable with two 40-position Ultra ATA IDE receptacle connectors – Connects from expander to IDE interface module

Cable assembly – Twisted and flat cables, 68-conductor – Connects from backplane to CD-RW paddleboard

IO/IP cable – 2P, 2m (6.568ft) long, white/orange – Connects from 2P drawer to 2P drawer

IO/IP cable – 2P, 3.5m (11.48ft) long, white/gray – Connects from 2P drawer to IO drawer

IP cable – 8P, 6m (19.68ft) long, black/red

IP cable – 8P, 4.5m (14.76ft) long, black/blue

IP cable – 8P, 3.3m (10.82ft) long, black/orange

Harness assembly – 16-conductor for rear fan – Connects from expander module to rear fan

Harness assembly – 24-conductor for front fan – Connects from expander module to front switch IDE interface, SCSI disk, and interlock

Cable – Flat, 26-conductor cable with IDC connectors on both ends – Connects from backplane to LED module

Cable assembly – Flat, 10-conductor cable with D-sub connectors – Connects from expander module to USB module and Ocp module

Harness assembly – 28AWG, 2-conductor cable – Connects from backplane to intrusion switch

Harness assembly – 28AWG, 2-conductor cable – Connects from backplane to intrusion switch

Cable assembly – Round, shielded, 4-conductor cable – Connects from expander module to USB module

Cable assembly – Round, shielded, 68-conductor cable with two (M) connectors – Connects from expander module to SCSI disk

Harness assembly – 18AWG, 4-conductor cable – Connects from backplane to power to CD-RW, and SCSI

Cable assembly – 24AWG, round, shielded, 8-conductor cable – Connects from expander module to USB module

Cable assembly – 24AWG, round, shielded, 8-conductor cable – 3.04m (10ft) long – Connects from USB module to router side of NAT box

Cable assembly – 24AWG, round, shielded, 8-conductor cable – Connects from expander module to USB module

Cable assembly – Flat 10-conductor, D-sub 9-position to 10-position recepticle – Connects from external side of bulkhead to OCP module

Cable assembly – Flat 10-conductor, D-sub 9-position to 10-position recepticle – Connects from external side of bulkhead to OCP module

Cable assembly – Flat, 10-conductor, D-sub 9-position, filtered

Harness assembly – 24AWG, 14-conductor cable – Connects from PCI backplane to PCI hot swap module

Cable assembly – Flat, 24-conductor, 2-receptacle connectors

Harness assembly – 22AWG, 5-conductor – Connects from from OCP to push button ID

Harness assembly – 24AWG, 4-conductor – Connects from backplane to fan

Harness assembly – 12 and 6 AWG, 6-conductor – Connects from power subrack J11, power interface J5 to 8P drawer J1 and J2

Harness assembly – 12 and 6 AWG, 6-conductor – Connects from power subrack J11, power interface J5 to 8P drawer J1 and J2

Cable assembly – Round, 18AWG, 12-conductor, crimped cables – Includes four cables

Harness assembly – 26AWG, 5-conductor – With two crimp-on connectors

Cable assembly – Round, shielded, 9-conductor cable with two (M) D-sub connectors

Harness assembly – 18AWG, 15-conductor cable with three connectors

Cable management and bracket kit

8P rear fan assembly – 250mm (3.5in) – 48VDC nominal operating voltage

PCI fan assembly – For PCI drawers

PCI fan assembly – For 2P drawers

Power safety switch assembly – Covers the power cords and the PCI hot-swap lever assembly (for PCI drawers)

Operator control panel (OCP) assembly – For 2P drawers

Operator control panel (OCP) assembly – For 8P drawers

Drawer front panel (metal) – 8P

AC power distrubution unit (PDU) – 4U, 60A (EMEA)

IO7 riser module – For PCI drawer

Standard I/O module

2P I/O cable interconnect module

SuperDome (SD) common logic module

I/O server management module (PBM) – For PCI drawers

CPU filler

CPU filler

IDE CD-ROM drive (Opal color) – 40X CD-R write

IDE CD-ROM drive (Opal color) – 40X CD-R write

36.4GB universal hot-plug Ultra320 SCSI hard drive – 10,000 RPM – Includes 1-inch, 80-pin drive tray

CD-RW drive (Carbon Black) – 16X speed – 12.7mm form factor (Teac)

1GB ECC RIMM, 800Mhz, 288Mb, 40ns (32 device) – Only Supported on 1000/1150 Mhz cpu’s For AlphaServer GS1280 Model 8/16/32/64 1150MHz

Memory module – RIMM, 256MB, ECC, 800MHz, 288MB, 40ns For ASvr GS1280 M8/16/32/64 1150MHz

512MB ECC RIMM, 800Mhz, 288Mb, 40ns (Only Supported on 1000/1150 Mhz cpu’s) – Asrv GS1280 Model 8/16/32/64 1.150GHz

1GB ECC RIMM, 800Mhz, 288Mb, 40ns (16 device) – Only Supported on 1000/1150 Mhz cpu’s

AlphaServer GS1280 Model 8/16/32/64 1150MHz Digital 2P I/O backplane

SCSI 2-slot backplane, 2P

CPU manager module (CMM) – Used on all CPU variants

2P PCI board expander – For AlphaServer GS1280 Model 8/16/32/64

IP loopback assembly – For AlphaServer GS1280 1150MHz

Backplane manager (MBM) – Controls the CPU management modules (CMMs) and contains logic to monitor and control environmental conditions in the 8P drawer – For use in the GS1280

SCSI backplane board – Supports two hot-swap SCSI low voltage differential (LVD) drives -2/3 BKP

PCI backplane board – With 5V PCI support – For use with a slow speed PCI drawer

X shelf I/O backplane board – For use with a high speed PCI drawer

Backplane assembly – For 8P drawers (Does not include alignment tools)

Power supply assembly – 48VAC, dual

Power supply assembly, dual – FEPS 48VDC, 200-240VAC

Power supply PC board – 500W, 5V/50A, 3.3V/75A output

Power supply – 2-phase, 48V input, 1200W – With Power Factor Correction (PFC)

Power distribution unit (PDU) – 30A, 3-PH input (Europe)

Power supply – 2000W, 48V at 41.67A – With Power Factor Correction (PFC)

48V power distribution unit (WPI)

SuperDome (SD) power interface

48V power interface assembly (WPI)

GS1280 2P CPU module, 1150MHz – Does not include OS