Demande de devis pour ce produit





Cliquez pour agrandir

HP 9000 K260 PA-8000 180MHz

Part number: A3205A

HP9000 K260 

TypeImageRéférence DescriptionCotation
CABLE
79909-3080

Video cable with Enhanced Video Connectors (EVC) on both ends – 1.8m (6.0ft) long


CABLE
A2375-63003

Drive power cable – 4-pin (F) connector to 4-pin (F) connector – 25.9cm (10.2in) long – From peripheral drive bay interconnect board to removable media or hard drive (one used per drive)


CABLE
A2375-63005

Single-Ended SCSI cable kit – Kit includes a cable clamp and a SCSI ribbon cable with termination and three 50-pin (F) connectors – 41.4cm (16.3in) long – From the peripheral drive bay interconnect board to the upper bay removable media drive(s)


CABLE
A2375-63008

Fast Wide SCSI ribbon cable with termination – Has five 68-pin (M) connectors – 57cm (22.5in) long – From peripheral drive bay interconnecting board to lower bay drive(s)


CABLE
A6144-63008

RS-232C serial cable – 25-pin (M) to 9-pin (F) – 3.0m (9.8ft) long


CABLE
C2300-60005

RGB color video cable – 15 pin (M) to 3 BNC (M) connectors – 1.8m (6.0ft) long


CABLE
D1184A

VGA extender cable assembly – 15-pin (M) to 15-pin (F), 1.5m (4.9ft) long


CABLE
D1184A

VGA extender cable assembly – 15-pin (M) to 15-pin (F), 1.5m (4.9ft) long


CABLE
P4819-80006

Analog video (VGA) cable (Quartz Gray cable with blue connectors) – 15-pin (M) to 15-pin (M) , 1.8m (69-inches) long


CHASSIS
A3453-60001

Chassis assembly – Desk-side version of the server – Includes casters mounted on the bottom for easy mobility, status panel, fans, and fan primary power cable


CHASSIS
A3453-60002

Chassis assembly – Rack mount version of the server – Includes status panel, fans, and fan primary power cable


BEZEL
A2375-40008

Upper rear bezel – Ribbed plastic piece at the top of the rear panel


BEZEL
A2375-40009

Lower rear bezel – Ribbed plastic piece at the bottom of the rear panel


BEZEL
A2375-60037

Front bezel assembly – Includes peripheral drive access door – For the deskside version of the server


BEZEL
A2375-60039

Front bezel assembly – Includes peripheral drive access door – For the rack mountable version of the server


RACK MOUNT KIT
A3187A

Rack Mount kit for HP 3000/9000 K-class – Allows factory integration of server into a 1.6M or a 1.1M cabinet


SWITCH
A2375-60099

Key switch assembly (three position) – Includes keys – Mounts on the front right side (below the LCD display)


GRAPHICS
A2636-66023

Artist (AX) – 1280 X 1024 2D 8-Plane Color Graphics Board – Installed on Core I/O Board or in HSC Slot (P/O A2999A)


GRAPHICS
A2999A

Artist 2D color graphics HP-HSC interface board – For the HP-HSC I/O board slot


GRAPHICS
A2999AR

Artist 2D color graphics HP-HSC interface board – For the HP-HSC I/O board slot


GRAPHICS
A3519A

VISUALIZE-EG color graphics HP-HSC interface board – Uses an EVC connector – For the HP-HSC I/O board slot or HP-HSC expansion I/O board


ADAPTER
1253-0635

Enhanced Video Connector (EVC) video adapter cable – EVC (M) to 15-pin (F), 20cm (7.87in) long – Used to connect EVC video output to 15-pin monitor connector


ADAPTER
8120-6862

Enhanced Video Connector (EVC) video adapter cable – EVC (F) to 15-pin (M) – 7.87in (0.2m) long – Used to connect EVC video output to 15-pin monitor connector


ADAPTER
8120-6863

Video gender changer – 15 pin (F) to 15 pin (F) – 2cm (1.0in) long – (A4169A)


ADAPTER
A4167A

Enhanced Video Connector (EVC) video adapter cable – EVC (F) to 15-pin (M), 20cm (7.87in) long – Used to connect EVC video output to 15-pin monitor connector


ADAPTER
A4168A

Enhanced Video Connector (EVC) video adapter cable – EVC (M) to 15 pin (F), 20cm (7.87in) long – Used to connect EVC video output to a 15-pin monitor connector


ADAPTER
A4169A

Video gender changer – 15 pin (F) to 15 pin (F) – 2cm (1.0in) long


COVER
5062-3343

Cover plate – For empty single high HP-PB I/O board slots (Includes the two captive screws)


COVER
A2375-40004

Left side cover assembly (Ribbed plastic)


COVER
A2375-40005

Right side cover assembly (Plastic – With top and bottom ribbed sections, and flat side protrusion)


COVER
A2375-40006

Top cover assembly


DRIVE
A1658-69002

Single-Ended SCSI-2 CD-ROM drive – 4X CD-ROM read


DRIVE
A3024-69001

A3024-69001


DRIVE
A3058-69001

1.0GB Fast Wide SCSI hard drive – 3.5-inch form factor, low profile


DRIVE
A3350-69001

1.0GB Differential Fast Wide SCSI-2 hard drive – 5,400 RPM, 3.5-inch form factor, low profile


DRIVE
A3351-69001

2.0GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor, low profile (Seagate)


DRIVE
A3351-69004

2.0GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor, low profile (Quantum)


DRIVE
A3353-69003

4.2GB Ultra Wide SCA SCSI hard drive – 3.5-inch form factor, 1.0-inch high (Seagate ST34573WC) – Includes SCA to 68-pin Differential Ultra Wide SCSI adapter board with power connector and jumpers


DRIVE
A5220-67003

Narrow Single-Ended SCSI-2 slot load DVD-ROM drive – 6X DVD-ROM read, 32X CD-ROM read (Pioneer DVD-303/304) – Has headphone jack and volume control – Replacement for the 2X CD-ROM drive (A3184A)


DRIVE
C1539-67203

4GB/8GB Single-Ended SCSI-2 DDS-2 tape (DAT) drive – (Part of A3183A)


DRIVE
C1539-67204

4.0GB Single-Ended SCSI DDS-2 tape (DAT) drive – 5.25-inch form factor – (Part of A2656A)


DRIVE
C1539-67204

4.0GB Single-Ended SCSI DDS-2 tape (DAT) drive – 5.25-inch form factor – (Part of A2656A)


DRIVE
C2490-69375

2.0GB Fast Wide SCSI hard drive – 3.5-inch form factor, half height


MEMORY
A2579-69001

16MB, 72-pin ECC DIMM memory module for HP9000 K260


MEMORY
A2580-69001

64MB, 72-pin ECC DIMM memory module for HP9000 K260


MEMORY
A3027A

128MB ECC SIMM high-density memory upgrade kit – Includes two 64MB SIMM modules


MEMORY
A3398-69014

128MB, 72-pin ECC DIMM memory module for HP9000 K260


PC BOARD
A2375-69002

HP9000 K260 Peripherial drive bay interconnect board – Mounts to the Rear of the Peripherial Drive Bay


PC BOARD
A2375-69196

HP9000 K260 Core I/O Interface Board (With Audio Capability) – Includes All the System Interfaces – Plugs into Slot on the Rear of the Computer (Next to the HP-PB I/O Board Slots)


PC BOARD
A2991-60022

HP9000 K260 Modem board – Mounts on the Core I/O interface board assembly (towards the top – from a rear panel view point)


PC BOARD
A3284-69510

HP9000 K260 System/Motherboard (Includes all Interconnecting Board Slots) – Vertical Board in the Center of the Computer


PC BOARD
A3398-69001

HP9000 K260 VISUALIZE-48XP Frame Buffer and Geometry Accelerator Board – Mounted in HP-HSC Expansion I/O Board Slot in Rear of Cabinet (P/O A4455A)


PC BOARD
A3398-69004

HP9000 K260 Texture Memory Board – Mounted on the VISUALIZE-48XP Frame Buffer and Geometry Accelerator Board (P/O A4455A)


PC BOARD
A3453-69108

HP9000 K260 Core I/O Interface Board – Includes All the System Interfaces – Plugs into Slot on the Rear of the Computer (Next to the HP-PB I/O Board Slots)


PC BOARD
A3519-60001

HP9000 K260 VISUALIZE-EG 2D Graphics Board – Mounted on Core I/O Board or HP-HSC Expansion I/O Board (P/O A3519A)


PC BOARD
A3641-69225

HP9000 K260 Power monitor board


PC BOARD
A4248-66001

HP9000 K260 Video out board – Mounted on the VISUALIZE-48XP frame buffer and geometry accelerator board – (Part of A4455A)


INTERFACE
28625-69003

Token Ring Interface Board – for the HP-PB I/O Board Slot (P/O J2166A)


INTERFACE
28640-69001

LAN Link (EtherNet or IEEE 802.3) Interface Board – for the HP-PB I/O Board Slot (P/O J2146A)


INTERFACE
28642A

Single-ended SCSI interface host adapter board kit – For the HP-PB I/O board slot – Includes 1m (3.3ft) SCSI cable and terminator


INTERFACE
28655-69004

Single Ended SCSI-2/Centronics Host Adapter Board – for the HP-PB I/O Board Slot (P/O 28642A or 28655A)


INTERFACE
28655A

Single-ended SCSI-2 and Centronics host adapter board – Includes a 1.0m (3.3ft) SCSI cable – For the HP-PB I/O board slot


INTERFACE
28670-69001

Fiber Distributed Data Interface (FDDI) Board – for the HP-PB I/O Board Slot (P/O J2157A)


INTERFACE
28696-69104

Fast Wide Differential SCSI Host Adapter Board – for the HP-PB I/O Board Slot (P/O 28696A)


INTERFACE
28696A

Fast wide differential SCSI-2 host adapter board kit – Includes 2.5m (8.2ft) SCSI cable – For the HP-PB I/O board slot


INTERFACE
28696AR

Remarketed Fast Wide Differential SCSI Host Adapter Board – for the HP-PB I/O Board Slot


INTERFACE
36960A

X.25 Network Link Interface Board (Can be RS-232 Direct Connect or V.35 Depending on Option Selected) – for the HP-PB I/O Board Slot


INTERFACE
A2969-69001

Fast Wide SCSI Interface Board – for the HP-HSC I/O Board Slot (P/O A2969A)


INTERFACE
A2969A

Fast Wide SCSI Interface Board (20MB/Sec.Transfer Rate) – for the HP-HSC I/O Board Slot


INTERFACE
A3495A

10/100Base-T LAN Adapter Interface Board – for the HP-PB I/O Board Slot (Auto Senses Between 10Mbps and 100Mbps)


INTERFACE
J2092-69011

16 Channel RS-232C Direct Connect MUX Board (with RJ-45 Connectors) – for the HP-PB I/O Board Slot (P/O J2092AZ)


INTERFACE
J2094AZ

16 Channel RS-232C Direct Connect MUX Board (with RJ-45 Connectors) – for the HP-PB I/O Board Slot


INTERFACE
J2096-69011

32 Channel RS-232C Direct Connect MUX Board (with RJ-45 Connectors) – for the HP-PB I/O Board Slot (P/O J2096AZ)


INTERFACE
J2096A

32 Channel RS-232C Direct Connect MUX Board (with RJ-45 Connectors) – for the HP-PB I/O Board Slot


INTERFACE
J2096AZ

32 channel RS-232C direct connect MUX board – Has RJ-45 connectors – For the HP-PB I/O board slot


INTERFACE
J2166A

Token ring interface board – For the HP-PB I/O board slot


INTERFACE
J2166B

Token ring interface board – For the HP-PB I/O board slot


POWER SUPPLY
0957-0085

Power supply assembly (Zytec/Artesyn 2294660) – 90-264VAC input, 47-63Hz – Four DC outputs, 1200 watts – Plugs into the rear of the computer on the far right side (rear view)


PROCESSOR
A3261-69204

HP PA-RISC processor board – 180MHz processor and 1MB X 1MB cache – Plugs into slot(s) next to the power monitor board on the front and the core I/O interface board on the rear (Four can be used)