HP-UX ‘VISUALIZE’ keyboard kit – Includes PS/2 keyboard, 3-button Mouse, mouse pad (with the ‘VISUALIZE’ logo), software on CD-ROM, working in comfort and start up guides

HP Windows keyboard – Has attached 6-pin mini-din cable – Includes keyboard and ergomonic information booklet

Upper bus converter

Cable Assembly – RJ-45 (M) connector to DB-25 (M) connector – 3m (9.8ft) long

Power cable assembly – 6-pin (F) connector to 6-pin (F) connector – 30.2cm (11.9in) long – From power management board to ‘Y’ power cable for the front and rear fans

Drive power cable – 4-pin (F) connector to 4-pin (F) connector – 25.9cm (10.2in) long – From peripheral drive bay interconnect board to removable media or hard drive (one used per drive)

Single-Ended SCSI cable kit – Kit includes a cable clamp and a SCSI ribbon cable with termination and three 50-pin (F) connectors – 41.4cm (16.3in) long – From the peripheral drive bay interconnect board to the upper bay removable media drive(s)

Single-Ended SCSI cable kit – Kit includes a cable clamp and a SCSI ribbon cable with termination and three 50-pin (F) connectors – 41.4cm (16.3in) long – From the peripheral drive bay interconnect board to the upper bay removable media drive(s)

‘Y’ power cable – 6-pin (F) connector to two 6cm (2.4in) cables with 4-pin (M) connectors – From fan connectors to fan primary power cable

Fast Wide SCSI ribbon cable with termination – Has five 68-pin (M) connectors – 57cm (22.5in) long – From peripheral drive bay interconnecting board to lower bay drive(s)

RS-232C serial cable – 25-pin (M) to 9-pin (F) – 3.0m (9.8ft) long

Chassis assembly – Desk-side version of the server – Includes casters mounted on the bottom for easy mobility, status panel, fans, and fan primary power cable

Chassis assembly – Rack mount version of the server – Includes status panel, fans, and fan primary power cable

Upper rear bezel – Ribbed plastic piece at the top of the rear panel

Lower rear bezel – Ribbed plastic piece at the bottom of the rear panel

Front bezel assembly – Includes peripheral drive access door – For the deskside version of the server

Front bezel assembly – Includes peripheral drive access door – For the rack mountable version of the server

Power supply fan kit (Artesyn 22918209) – Includes the fan, screws, and instructions – Mounts on the back of the power supply

Key switch assembly (three position) – Includes keys – Mounts on the front right side (below the LCD display)

VISUALIZE-EG color graphics HP-HSC interface board – Uses an EVC connector – For the HP-HSC I/O board slot or HP-HSC expansion I/O board

VISUALIZE-48XP – 1280 × 1024 accelerated 3D solids 48-plane color graphics board with 8 overlay planes

Enhanced Video Connector (EVC) video adapter cable – EVC (M) to 15-pin (F), 20cm (7.87in) long – Used to connect EVC video output to 15-pin monitor connector

Left side cover assembly (Ribbed plastic)

Right side cover assembly (Plastic – With top and bottom ribbed sections, and flat side protrusion)

Top cover assembly

Processor cover plate – For covering processor slots 4 and 5

Processor cover plate – For covering processor slots 4 and 5

HSC slot cover plate – Covers empty HSC expansion slots

Single-Ended SCSI-2 CD-ROM drive – 4X CD-ROM read

5GB, 8mm Single-Ended SCSI (DAT) tape drive

1.0GB Fast Wide SCSI hard drive – 3.5-inch form factor, low profile

4GB/8GB Single-Ended SCSI DDS-2 tape (DAT) drive

1.0GB Fast Wide SCSI-2 hard drive – 3.5-inch form factor, low profile

2.0GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor, low profile (Quantum)

2.0GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor, low profile

4.2GB Ultra Wide SCA SCSI hard drive – 3.5-inch form factor, 1.0-inch high (Seagate ST34573WC) – Includes SCA to 68-pin Differential Ultra Wide SCSI adapter board with power connector and jumpers

4.0GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor, half height

12GB Single-Ended SCSI DDS-3 tape (DAT) drive

9.1GB Ultra Wide SCA SCSI hard drive – 3.5-inch form factor, 1.0-inch high (Seagate ST39236LC) – Includes SCA to 68-pin Differential Ultra Wide SCSI adapter board with power connector and jumpers

9.0GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor, half height

SCSI-2 CD-ROM drive – 12X CD-ROM read

18.0GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor, half height

Narrow Single-Ended SCSI-2 slot load DVD-ROM drive – 6X DVD-ROM read, 32X CD-ROM read (Pioneer DVD-303/304) – Has headphone jack and volume control – May be used as replacement for a CD-ROM drive

6x-max DVD-ROM read, 32x-max CD-ROM read Narrow Single-Ended SCSI-2 DVD-ROM drive

6x-max DVD-ROM read, 32x-max CD-ROM read Narrow Single-Ended SCSI-2 DVD-ROM drive

36.0GB Fast Wide SCSI-2 hard drive – 3.5-inch form factor, half height

12GB/24GB Single-Ended SCSI-2 DDS-3 (DAT) tape drive – 5.25-inch form factor – (part of A3542A, A4249A)

4.0GB Single-Ended SCSI DDS-2 tape (DAT) drive – 5.25-inch form factor

2.0GB Fast Wide SCSI hard drive – 3.5-inch form factor, half height

32MB, 72-pin ECC DIMM memory module for HP9000 K580

16MB, 72-pin ECC DIMM memory module for HP9000 K580

64MB, 72-pin ECC DIMM memory module for HP9000 K580

32MB ECC SIMM memory module – Includes two 16MB SIMM modules

128MB ECC SIMM high-density memory upgrade kit – Includes two 64MB SIMM modules

128MB, 72-pin ECC DIMM memory module for HP9000 K580

256MB ECC SIMM high-density memory upgrade kit – Includes two 128MB SIMM modules

64MB ECC memory upgrade kit – Includes two 32MB SIMM modules

256MB, 72-pin ECC DIMM memory module for HP9000 K580

512MB ECC memory upgrade kit – Includes two 256MB SIMM modules

HP9000 K580 Peripherial drive bay interconnect board – Mounts to the Rear of the Peripherial Drive Bay

HP9000 K580 Core I/O Interface Board (With Audio Capability) – Includes All the System Interfaces – Plugs into Slot on the Rear of the Computer (Next to the HP-PB I/O Board Slots)

HP9000 K580 Modem board – Mounts on the Core I/O interface board assembly (towards the top – from a rear panel view point)

HP9000 K580 Audio board for the core I/O board – Mounted on Core I/O board next to HP-HSC slot

HP9000 K580 Texture memory board – Mounted on the VISUALIZE-48XP frame buffer and geometry accelerator board

HP9000 K580 Dual Bus 4 Slot HP-HSC Expansion Board – Plugs into the Slot Between the Core I/O Interface Board and the Rear Mounted Processor Boards

HP9000 K580 4 Slot HP-HSC Expansion Board – Does not include the HP-HSC expansion I/O board tray (P/O A2990A)

HP9000 K580 2 Slot HP-HSC Expansion Board – Plugs into the Slot Between the Core I/O Interface Board and the Rear Mounted Processor Boards (P/O A3186A)

HP9000 K580 VISUALIZE-48XP – 1280 × 1024 accelerated 3D solids 48-plane color graphics board with 8 overlay planes

HP9000 K580 Power monitor board

HP9000 K580 Video out board – Mounted on the VISUALIZE-48XP frame buffer and geometry accelerator board

HP9000 K580 System board – For 6-way processor configuration – Mounts vertically in the center of the chassis

Single-ended SCSI-2 and Centronics host adapter board – Includes a 1.0m (3.3ft) SCSI cable – For the HP-PB I/O board slot

Fast wide differential SCSI-2 host adapter board kit – Includes 2.5m (8.2ft) SCSI cable – For the HP-PB I/O board slot

Fast Wide SCSI interface board

Fast Wide SCSI Interface Board (20MB/Sec.Transfer Rate) – for the HP-HSC I/O Board Slot

Fiber channel adapter – 1063Mbps adapter installed in an HP K-Class computer HSC expansion board – For linking to fiber channel mass storage only

Fiber channel adapter – 1063Mbps adapter installed in an HP K-Class computer HSC expansion board – For linking to fiber channel mass storage only

Fiber channel adapter – 266MBPS adapter for mount in an HSC expansion board

Dual Bus 4 Slot HP-HSC Expansion Board – Provides two HSC busses with two slots each – Occupies processor slots 4 & 5

4 slot HP-HSC expansion board – Provides four HSC slots

2 slot HP-HSC expansion board – Provides two HSC slots

HP-PB I/O Bus Converter – Has two connectors (A & B) for connecting to an A1828A HP-PB Expansion Module – Occupies two slots on an HSC Expansion Module

LAN adapter – Fiber distributed data interface network board – Has two fiber ports – Mounts in an HP-HSC expansion board

1000Base-SX HP-HSC single port Gigabit Ethernet fiber channel LAN adapter – Mounts in an HP-HSC expansion board

ATM/155 – 155Mbps HP-HSC network interface adapter

LAN Adapter for mount in an HP-HSC expansion board J3514A #001 – Two port 100Base-T LAN adapter J3514A #002 – Two port 100Base-fx LAN adapter

Power supply assembly (Zytec/Artesyn 2294660) – 90-264VAC input, 47-63Hz – Four DC outputs, 1200 watts – Plugs into the rear of the computer on the far right side (rear view)

HP PA-RISC 8200 processor – 240MHz with 4MB cache

HP PA-RISC processor upgrade kit – Includes one 240MHz PA-RISC 8200 processor with 4MB cache