USB keyboard with PC-105 layout – Has 2.9m (10ft) cable with type (A) USB connector (Option ABF – European French)

Audio cable assembly – For CD-ROM, CD-RW, or DVD-ROM – 4-pin (F) connector to 4-pin (F) connector – 47.8cm (18.8in) long

Ribbon Cable – Data cable for the DDS-3 tape (or floppy) drive and the CD-ROM drive

Drive power cable assembly – Connects from the I/O and PCI backplane PC board assembly to the SCA hard drive interface board, floppy/tape drive bay, and the CD-ROM bay

Audio cable assembly – For CD-ROM, CD-RW, or DVD-ROM – 4-pin (F) connector to 4-pin (F) connector – 47.8cm (18.8in) long

Ribbon Cable – Data cable for the DDS-3 tape (or floppy) drive and the CD-ROM drive

Drive power cable assembly – Connects from the I/O and PCI backplane PC board assembly to the SCA hard drive interface board, floppy/tape drive bay, and the CD-ROM bay

Ribbon Cable – Connects between the system processor board and the front panel (For the LCD display and power switch assembly)

Ribbon Cable – Connects between the system processor board and the front panel (For the LCD display and power switch assembly)

Flex cable assembly (U-shaped) – From system processor PC board to I/O and PCI backplane board

Chassis assembly for J5×00/J7000 workstations – Includes chassis with side and top panels, all cooling fans, I/O fan and speaker bracket, PCI board retainer clip, drive EMI covers and trays, floppy/CD-ROM drive data and power cables, and bus bar shield

Front Bezel Assembly – Includes the front plastic cover with the hard drive access door

Tubeaxial fan (Panaflo model FBA09A12H) 92mm x 92mm x 25mm thick fan with 22cm long three wire cable – 12VDC nominal operating voltage – For cooling the system processor board – Mounts to the inner fan wall of the chassis (3 used)

Tubeaxial fan kit (Panaflo model FBA12G12H) – 120mm x 120mm x 37mm thick fan with 30cm long 3-wire cable – 12VDC nominal operating voltage – Includes ESD wrist strap and instructions – Mounts in the I/O fan and speaker bracket assembly

Tubeaxial fan kit (Panaflo model FBA12G12H) – 120mm x 120mm x 37mm thick fan with 30cm long 3-wire cable – 12VDC nominal operating voltage – Includes ESD wrist strap and instructions – Mounts in the I/O fan and speaker bracket assembly

HP VISUALIZE-fx10 Pro (Revision B) PCI graphics card with 128MB DDR SDRAM memory

HP VISUALIZE-fx2 graphic accelerator board – 24/8 bit accelerated 3D solids – Has EVC video connector

HP VISUALIZE-fx6 advance performance 3D solids PCI graphics card – Requires 2 PCI slots

Video output board for VISUALIZE-FX series graphics products only – Provides NTSC, PAL,AND S-VIDEO outputs

Texture memory upgrade for VISUALIZE-fx6 – Adds 16MB texture memory and 32KB x 32KB virtual texture cache

HP VISUALIZE-EG PCI graphics card with 4MB memory – The EG card is 8 plane with 8 overlay planes – Can be used in either a 3.3V or 5.0V PCI slot

HP VISUALIZE-fxe PCI graphics card with 9.5MB of texture memory (24MB SDRAM total memory) , 32-bit, 66MHz

USB 3-button mouse (Quartz Gray) – Has 2.9m (10ft) cable with type (A) USB connector

USB 3-button scrolling mouse (Carbon Black) – Has 2.9m (10ft) cable with type (A) USB connector

36.4GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST336704LC) – (Part of A6031A)

9.1GB Ultra2 wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

32x-max CD-ROM drive – Half-height CD-ROM drive with ATAPI IDE connector

12GB native capacity DDS-3 tape drive – Can store up to 24GB with data compression – Mounts in 3.5 inch drive tray

73GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector – (Part of A7207A)

73GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector – (Part of A7207A)

36.4GB hot-plug Wide Ultra2 SCSI Low Voltage Differential (LVD) hard drive – 15,000 RPM, 3.5-inch form factor, 1.0-inch high – (A7208A)

9.1GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST39102LC) – (Part of A4997A)

18GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST318203LC) – (Part of A4998A)

18GB Ultra2 Wide SCSI LVD hard drive – 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector

1.44MB floppy drive – 3.5-inch form factor with IDE PC/AT interface

36GB Ultra2 Wide LVD SCSI hard drive – 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector

73GB Ultra2 Wide SCSI LVD hard drive – 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector

36.4GB Ultra2 Wide SCSI LVD hard drive – 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

IDE CD-RW drive – 24X CD-R write, 10X CD-RW rewrite, 40X CD-ROM read

512MB, 120MHz SDRAM DIMM memory module for HP9000 J5600

512MB, 120MHz SDRAM DIMM memory module – (Part of A4995A)

256MB, 120MHz SDRAM DIMM memory module for HP9000 J5600

1024MB, 120MHz SDRAM DIMM memory module for HP9000 J5600

HP9000 J5600 SCA hard drive interface backplane PC board assembly – Mounts on the rear of the drive bay assembly

HP9000 Workstation I/O and PCI backplane PC board assembly – Mounts in the center left side of the chassis assembly

HP9000 Workstation J5600 SCA hard drive interface backplane PC board assembly – Mounts on the rear of the drive bay assembly

HP9000 J5600 System Processor Board and tray assembly – Includes two 552MHz PA-8600 RISC processors – Mounts in the center left side of the chassis assembly

FDDI LAN PCI network adapter board

LAN adapter – 1000Base-SX PCI Gigabit Ethernet LAN adapter – Supports all PCI bus configurations

WAN adapter – Two port X.25 PCI frame relay adapter card

WAN adapter – Four port X.25 frame relay adapter card

Power supply assembly (830W) – Includes power supply, power supply fans, and power cord and buss bar connectors – Mounts in the rear right corner of the chassis assembly