PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (USA)

‘Windows’ keyboard assembly (Quartz Gray, 105 key) – Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option AB6, Arabic-French)

SCSI cable marked ‘Cable, SCSI iNT/EXT’ – Has two 68-pin (M) connectors – 89cm (35in) long – From SCSI backplane to I/O basebrd

Cable kit – Two internal SCSI cables and one adapter – Used with HP NetRAID-3si disk array controller

SCSI interface cable – Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends – 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

Exhaust fan cable – From I/O board to exhaust fans

IDE CD-ROM cable – From IDE CD-ROM drive to I/O baseboard

Floppy ribbon cable – Has 26-pin (M) edge connectors – 33.7cm (13.3in) long – From floppy drive to I/O baseboard

AC power harness cable – Has three C14 (M) external AC power cord outlets with cable retainers in a metal bracket, two grounding wire bundles with ring terminals, and three 1.1m (3.5ft) C14 (F) internal AC power cords for the hot-swap power supply bay

Ribbon cable assembly – Has 50-pin (F) connector to three DB-15 (F) connectors – Overall length is 30cm (12in) – From I/O board to power supply cage

Cable assembly – From I/O board to the front left corner of the chassis

SCSI backplane power cable – From SCSI backplane to I/O baseboard

Power supply harness – A bundle of three power cables with 24-pin (M) connectors marked ‘PDS1’, ‘PS2’, and ‘PS3’ to 24-pin (F) connectors marked ‘J8801’, ‘J8802’, and ‘J9801’ – Overall length is 28.6cm (11.3in)

Server rack mount front bezel

Hot-swap fan assembly – Includes two fans stacked together – (Exhaust fan) – Mounts on the rear of the chassis

Hot-swap fan assembly – Includes two fans stacked together – Mounts in the center of the chassis in front of the I/O boards

2 button PS/2 serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-din connector

SureStore H/A tape array 5500 – Rack mount enclosure for up to five DLT80m DLT drives – With rail kit, install guide, users manual, two power cables, and four 0.5m (1.6ft) long SCSI cables

SureStore H/A tape array 5500 – Rack mount enclosure for up to five DLT80m DLT drives – With rail kit, install guide, users manual, two power cables, and four 0.5m (1.6ft) long SCSI cables

24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive

HP SureStore Tape Rack Array – Includes rack mount enclosure for up to four removable drives, with rail kit, install guide, users manual, four power cables, two 2.5M (8.2ft) & one 0.9M (3.0ft) SCSI cable

NetServer Storage System/12 – External cabinet which can hold eight half height, or 12 low profile Ultra2 SCSI drives – Includes one Rack Storage 12 Ultra2 SCSI card

NetServer Storage System/12 – External cabinet which can hold eight half height, or 12 low profile Ultra2 SCSI drives – Includes one Rack Storage 12 Ultra160 SCSI card

NetServer Rack Storage 12/FC – Fiber channel mass storage enclosure – Can hold 8 or 12 Ultra2 SCSI drives – Includes one copper fiber channel cable and one copper GBIC

8GB external SureStore DAT 8e Single-Ended Narrow SCSI-2 DDS-2 DAT tape drive

24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive

20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive

20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive

20/40GB SureStore DAT40e external DDS-4 tape drive

20/40GB SureStore DAT40e external DDS-4 tape drive

20/40GB hot-swap SureStore DLT40r removable DLT drive – Includes manuals, software on a CD-ROM, DLT tape IV media, and cleaning cartridge

20/40GB SureStore DAT40X6e DDS-4 external autoloader tape drive

20/40GB SureStore DAT40×6e DDS-4 external autoloader tape drive

80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive

40/80GB hot-swap SureStore DLT80r removable DLT drive – Includes manuals, software on a CD-ROM, DLT tape IV media, and cleaning cartridge

1.44MB, 3.5-inch floppy drive with bezel

IDE slimline CD-ROM drive – 24X CD-ROM read

9.1GB ‘hot swap’ Ultra2 SCSI hard drive module – 7200 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer

9.1GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer

18GB ‘hot swap’ Ultra2 SCSI hard drive module – 7200 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer

18GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer

36.4GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer

64MB SIMM memory module for NetRAID 3Si disk array controller – (D7132A)

64MB, 100MHz ECC SDRAM DIMM memory module – I/O Channel Memory – Mounts on the I/O board in the NetRAID memory slot

64MB, 100MHz ECC SDRAM DIMM memory module – I/O Channel Memory – Mounts on the I/O board in the NetRAID memory slot

128MB, 100MHz ECC SDRAM DIMM memory module – I/O Channel Memory – Mounts on the I/O board in the NetRAID memory slot

32MB, 100MHz non-ECC SDRAM DIMM memory module – I/O Channel Memory – Mounts on the I/O board in the NetRAID memory slot

128MB, 133MHz ECC SDRAM DIMM memory module for HP LT6000 NetServer

256MB, 133MHz ECC SDRAM DIMM memory module for HP LT6000 NetServer

512MB, 133MHz ECC SDRAM DIMM memory module for HP LT6000 NetServer

1.0GB, 133MHz ECC SDRAM DIMM memory module for HP LT6000 NetServer

HP TL6000 NetServer Processor Board – Has three processor slots on each side of the board and six VRM slots on one side – Plugs into the system board

HP TL6000 I/O baseboard – Has internal and external SCSI connectors and a slot for the I/O board

HP TL6000 SCSI backplane board – Has four SCA slots for the hot-swap drives – Mounts in the back of the hot-swap drive bay

TL6000 NetServer I/O board (riser PCA) – Contains two hot-swap 64-bit 66MHz, two hot-swap 64-bit 33MHz, and two non-hot-swap 64-bit 33MHz PCI slots – Plugs into the I/O Baseboard

HP TL6000 System board – Has Ultra3 SCSI bus, eight DIMM slots, integrated ATI Rage IIIC video controller with 2MB SGRAM, and a slot for the processor board

HP TL6000 I/O baseboard – Has internal and external Ultra3 SCSI connectors and a slot for the I/O board

HP TL6000 Olx board assembly – Manages power to the ‘hot swap’ PCI slots – Has LED indicator lights and I/O board retaining brackets

LAN Adapter – PCI 10/100TX LAN Board for NetServer (D5013A)

NetRAID-1Si One-Channel Disk Array Controller – PCI Board with One Internal 68 Pin High Density and One External 68 Pin Ultra High Density SCSI Connector (P/O D2140A)

NetRAID-1si – One-channel disk array controller – PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector

NetRAID-3Si Three-Channel Disk Array Controller – PCI Board With Three Internal 68 Pin High Density and Three External 68 Pin High Density Ultra Wide SCSI Connectors (D5955A)

NetRAID-3si three-channel disk array controller – PCI board with three internal 68 pin high density and three external 68 pin high density Ultra wide SCSI connectors

Ultra3 SCSI host adapter

TopTools remote control card with battery (Version 1) – Allows emergency remote access using LAN or modem

Fiber channel host bus adapter – Controller PC board for fiber channel devices

Fiber channel host bus adapter – Controller PC board for clustering fiber channel devices – Rack Storage/12 Fiber Channel Host Bus Adapter – Controller PC board for clustering fiber channel devices

NetRaid-4M four-channel disk array controller W/64MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-4M Four-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

NetRaid-4M four-channel disk array controller W/128MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-4M Four-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

TopTools remote control card with battery (Version 2.0) – Allows emergency remote access using LAN or modem

NetRaid-1M single-channel Ultra3 SCSI disk array controller W/32MB cache – PCI board with one internal 68-pin High Density and one external 68-pin Very High Density Ultra3 SCSI connector

NetRAID-1M Single-Channel Disk Array Controller W/32MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

NetRaid-2M dual-channel disk array controller W/64MB cache – PCI board with two internal 68-pin High Density and two external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-2M Dual-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

Ultra160 LVD SCSI adapter board (Adaptec ASC-29160) – 64-bit, 66MHz PCI – External 68-pin High Density LVD connector, internal 68-pin Ultra160 LVD connector, internal 68-pin SE connector, internal 50-pin Narrow SE connector

Ultra 160 LVD SCSI adapter board (Adaptec ASC-29160) – 64 bit, 66MHz PCI – External 68 pin high density LVD connector, internal 68 pin Ultra 160 LVD connector, internal 68 pin single-ended connector, internal 50 pin narrow single-ended connector

NetRaid-2M dual-channel disk array controller W/128MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-2M Dual-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

Gigabit LAN adapter – PCI-X 10/100/1000TX 3Com LAN card – (3Com 3C996-T)

Hot-swap autoranging power supply – 100-240VAC input, 50-60Hz, 289 watts

Intel Pentium III Xeon processor – 700MHz (Cascades, 100MHz front side bus, 1MB Level-2 cache, Slot 2) for LT6000 PIII/700 NetServer

Intel Pentium III Xeon processor upgrade – Includes one 700MHz (Cascades, 1MB Level-2 cache, Slot 2) processor for HP LT6000 PIII/700 NetServer

Intel Pentium III Xeon processor – 700MHz (Cascades, 100MHz front side bus, 2MB Level-2 cache, Slot 2) for LT6000 PIII/700

Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 512KB Level-2 cache, Slot 2) for TL6000 PIII/550

Intel Pentium III Xeon processor upgrade – Includes one 550MHz (Tanner, 512KB Level-2 cache, Slot 2) processor for HP LT6000 PIII/550 NetServer

Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 1MB Level-2 cache, Slot 2) for HP TL9000 PIII/550 NetServer

Intel Pentium III Xeon processor upgrade – Includes one 550MHz (Tanner, 1MB Level-2 cache, Slot 2) processor for HP LT6000 PIII/550 NetServer

Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 2MB Level-2 cache, Slot 2) for HP TL6000 PIII/550

Intel Pentium III Xeon processor upgrade – Includes one 550MHz (Tanner, 2MB Level-2 cache, Slot 2) processor for HP LT6000 PIII/550 NetServer

Intel Pentium III Xeon processor – 900MHz (2MB Level-2 cache, slot 2) for LT6000 PIII/900 NetServer