Demande de devis pour ce produit





Cliquez pour agrandir

HP LH3000 PIII/800 NetServer

Part Number: D9180A-D9183AV

HP LH3000 PIII/800

TypeImageRéférence DescriptionCotation
CABLE
5183-3443

Floppy drive ribbon cable – 34-pin (F) connector marked ‘to system backplane’ and a 34-pin (F) connector marked ‘to 3.5 inch flexible disk drive’ – 61cm (24in) long – Cable F7


CABLE
5183-3449

Mass storage power cable (P3) – 22-pin (F) connector marked ‘P1’ to three cable assemblies with a 14-pin (F) connector marked ‘P2’ and four unmarked 4-pin (F) connectors – The longest cable is 50.8cm (20in) long – From backplane board to secondary hot-swa


CABLE
5185-0350

SCSI cable with twisted pair segments (C62) – Cable is marked ‘Int SCSI cable C62’ – One 68-pin (M) connector marked ‘To iO board’ to one 68-pin (M) connector marked ‘To SCSI mass storage device’ – 55.2cm (21.8in) long


CABLE
D4282B

Cable kit – Two internal SCSI cables and one adapter – Used with HP NetRAID-3si disk array controller


CABLE
D6020A

SCSI interface cable – Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends – 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long


CABLE
D6020A

SCSI interface cable – Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends – 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long


CABLE
D8228-63031

Cable assembly – Has 14-pin (F) connectors – 9.8cm (3.9in) long – Hot-Swap cage power harness


CABLE
D8228-63041

Management port ribbon cable


CABLE
D8228-63043

IDE CD-ROM drive cable (D7) – From backplane board to IDE CD-ROM drive


CABLE
D8228-63045

Exhaust fan power cable


CABLE
D8228-63034

Ribbon cable assembly – Has 30-pin (F) connector to both a 7.8cm (3.1in) cable with DB-15 (F) connector and mounting hardware and a 16.5cm (6.5in) cable with DB-15 (F) connector and mounting hardware – From power management/interconnect board to power sup


CABLE
D8228-63035

Power supply cable assembly – A 22cm (8.7in) cable which has a 24-pin (M) connector and a 20-pin (F) connector connected using two wires to an 11cm (4.3in) cable which has a 24-pin (M) connector and a 24-pin (F) connector – From power management/interconn


BEZEL
5064-9002

Main bezel (rack mount version) – Low profile – Covers the front of the server


BEZEL
D8228-63019

Front bezel – For pedestal configuration – Includes bezel lock


BEZEL
D8228-63036

Main bezel (rack mount version) – Covers the front of the server


BEZEL
5064-4639

Front panel assembly bezel – Mounts over the control panel


FAN
D8228-63016

Tubeaxial fan assembly – For the processor – Small fan that mounts on the system processor board


FAN
D8228-63013

Hot-swap fan assembly – For the I/O boards – Mounts on the I/O board support in the middle of the chassis (Two used)


FAN
D8228-63014

Hot-swap fan assembly – Exhaust Fan – Mounts on the rear of the chassis assembly (system processor board side)


FAN
D8228-63015

Fan assembly – Includes two hot-swap fans mounted on a bracket – For the power supply – Slides in slot in the middle of the chassis assembly (in front of the power supplies)


FAN
D8228-63015

Fan assembly – Includes two hot-swap fans mounted on a bracket – For the power supply – Slides in slot in the middle of the chassis assembly (in front of the power supplies)


RACK MOUNT KIT
C6542A

SureStore 2U k rack kit for HP racks – 2 bay half height – Includes ‘Y’ power cable, 0.5M high density 68-pin SCSI cable, two doors, rails, and documentation


RACK MOUNT KIT
C6543A

SureStore 3U k rack kit for HP racks – 4 half height or 2 full height – Includes ‘Y’ power cable, 0.5M high density 68-pin SCSI cable, two doors, rails, and documentation


RACK MOUNT KIT
D9142A

NetServer LH3000/LH6000 pedestal to rack conversion kit – Includes slide rails, bezels, and accessories


CLIP
5042-2144

Latch clip – Latch clip – Catches the arm from the cover locking latch – Mounts on the front of the chassis


COVER
5064-4693

Cover – Installed over the system board side of the chassis


COVER
5064-7906

Cover – Installed over the I/O board side of the cabinet


COVER
5064-4694

Cover – Large cover installed on both sides of a pedestal version or top and bottom of a rack mount version


PANEL
5063-8389

5.25-inch filler panel (Quartz Gray) – For empty 5.25-inch drive bays above the Hot-Swap drive bay


MOUSE
C3751-60201

PS/2 two-button serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-DIN connector – (Part of C3751B)


FILLER
5064-4689

Hot-swap drive bay filler panel with lock


STORAGE SYSTEM
C1354AR

SureStore H/A tape array 5500 – Rack mount enclosure for up to five DLT80m DLT drives – With rail kit, install guide, users manual, two power cables, and four 0.5m (1.6ft) long SCSI cables


STORAGE SYSTEM
C1556D

24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive


STORAGE SYSTEM
C5695A

HP SureStore Tape Rack Array – Includes rack mount enclosure for up to four removable drives, with rail kit, install guide, users manual, four power cables, two 2.5M (8.2ft) & one 0.9M (3.0ft) SCSI cable


STORAGE SYSTEM
D5989B

NetServer Storage System/12 – External cabinet which can hold eight half height, or 12 low profile Ultra2 SCSI drives – Includes one Rack Storage 12 Ultra2 SCSI card


STORAGE SYSTEM
D5991A

NetServer Rack Storage 12/FC – Fiber channel mass storage enclosure – Can hold 8 or 12 Ultra2 SCSI drives – Includes one copper fiber channel cable and one copper GBIC


STORAGE SYSTEM
C1354A

SureStore H/A tape array 5500 – Rack mount enclosure for up to five DLT80m DLT drives – With rail kit, install guide, users manual, two power cables, and four 0.5m (1.6ft) long SCSI cables


DRIVE
P1168-69003

9.1GB hot-swap Ultra3 SCSI hard drive module – 10,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1168A)


DRIVE
C1555D

24GB internal SureStore DAT 24i Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive (Flint)


DRIVE
C1556DR

24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive


DRIVE
C1559C

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive


DRIVE
C1559D

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive


DRIVE
C1559DR

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive


DRIVE
C1579A

20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive


DRIVE
C5647A

20/40GB SureStore DLT 40i Single-Ended Narrow SCSI-2 internal DLT drive


DRIVE
C5677B

6×12/24GB SureStore DAT 24×6i Single-Ended Narrow SCSI-2 internal autoloader DDS-3 (DAT) tape drive


DRIVE
C5687A

20/40GB SureStore DAT40e external DDS-4 tape drive


DRIVE
C5697A

20/40GB hot-swap SureStore DLT40r removable DLT drive – Includes manuals, software on a CD-ROM, DLT tape IV media, and cleaning cartridge


DRIVE
C5726A

80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive


DRIVE
C6280F

SureStore 418 8 slot DLT autoloader – Includes one Ultra SCSI DLT 4000 drive, six cartridge magazines, SCSI cable and terminator, and five data cartridges


DRIVE
D2035-60282

1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height – (Part of D2035A/B)


DRIVE
D4911-69001

9.1GB Ultra Wide SCSI hard drive module – 7,200 RPM


DRIVE
D6106-69001

9.1GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6106A)


DRIVE
D6107-69001

9.1GB hot-swap Ultra2 SCSI hard drive module – 10,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6107A)


DRIVE
D7049-69001

9.1GB Ultra Wide SCSI hard drive module – 10,000 RPM


DRIVE
D7174-69000

18GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D7174A)


DRIVE
D7175-69000

18.2GB hot-swap Ultra2 SCSI hard drive module – 10,000 RPM – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D7175A)


DRIVE
D7176-69001

18.2GB Wide Single-Ended SCSI hard drive – 7,200 RPM


DRIVE
D9419-69002

36.4GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer – (D9419A)


DRIVE
D9421-69001

18.2GB hot-swap Ultra3 SCSI hard drive module – 15,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D9421A)


DRIVE
P1166-69003

18.2GB ‘hot swap’ Ultra3 SCSI hard drive module – 10000 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer


DRIVE
P1167-69002

18.2GB Ultra3 Wide SCSI LVD hard drive module – 10,000 RPM, 3.5-inch form factor, 1.0-inch high (Seagate ST318404LW)


DRIVE
P1213-69001

9GB Ultra3 SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high


DRIVE
P1214-69002

9GB Ultra3 SCSI hard drive module – 10000 RPM, 3.5in form factor, low profile


DRIVE
P1215-69001

18GB Ultra3 SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high – Comes mounted on a drive tray


DRIVE
P1217-69001

9.1GB hot-swap Ultra3 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1217A)


DRIVE
P3577-69001

73.4GB hot-swap Ultra3 SCSI hard drive module – 10,000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer


DRIVE
P1169-69002

36.4GB Ultra3 Wide SCSI LVD hard drive module – 10,000 RPM (Seagate ST336704LW)


DRIVE
P1216-69001

18.2GB hot-swap Ultra3 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1216A)


MEMORY
D7132-69000

64MB SIMM memory module for NetRAID 3Si disk array controller – (D7132A)


MEMORY
D7155-69001

64MB, 100MHz ECC SDRAM DIMM memory module – I/O Channel Memory – Mounts on the I/O board in the NetRAID memory slot


MEMORY
D7156-69001

128MB, 100MHz ECC SDRAM DIMM memory module – I/O Channel Memory – Mounts on the I/O board in the NetRAID memory slot


MEMORY
D8228-63020

32MB, 100MHz non-ECC SDRAM DIMM memory module – I/O Channel Memory – Mounts on the I/O board in the NetRAID memory slot


MEMORY
D8267-69001

512MB, 133MHz ECC SDRAM DIMM memory module – (D8267A) – for HP LH3000 NetServer


MEMORY
D8264-69000

64MB, 133MHz ECC SDRAM DIMM memory module – (D8264A) – for HP LH3000 NetServer


MEMORY
D8265-69001

128MB, 133MHz ECC SDRAM DIMM memory module – (D8265A) – for HP LH3000


MEMORY
D8266-69001

256MB, 133MHz ECC SDRAM DIMM memory module – (D8266A) – for HP LH3000 NetServer


MEMORY
D8268-69001

1GB, 133MHz ECC SDRAM DIMM memory module – (D8268A) – for HP LH3000 NetServer


PC BOARD
D6028-69002

HP LH3000 NetServer NetServer Remote Control Board with 4 Pin I2C Cable (D6028A)


PC BOARD
D8228-69001

HP LH3000 NetServer I/O Board – Contains four 64-bit PCI, two 64-bit and two 32-bit hot plug PCI accessory card slots -Includes extractor


PC BOARD
D8228-69006

HP LH3000 NetServer Power Management/Interconnect Board – Has connectors for the system processor board, I/O board, IDE drives, and system power connectors – Mounts flat in the center of the chassis


PC BOARD
D8236-69000

HP LH3000 NetServer System Processor Board – For up to Two PIII Processors with 133 MHz FSB – Has Four DIMM Sockets and Integrated ATI Rage IIc video controller with 2MB SGRAM


PC BOARD
D8280-63000

HP LH3000 NetServer Duplexing Backplane – Attaches to Hot Swap Bay Backplane to Split 6 Bay Hot Swap Cage into Two 3 Bay Units with Separate Connectors


PC BOARD
D8280A

HP LH3000 NetServer Duplexing Backplane – Attaches to Hot Swap Bay Backplane to Split 6 Bay Hot Swap Cage into Two 3 Bay Units with Separate Connectors


PC BOARD
P1178-69001

HP LH3000 NetServer /O Board Ultra3 SCSI – Contains four 64-bit PCI, two 64-bit and two 32-bit hot plug PCI accessory card slots


PC BOARD
D7140-63014

HP LH3000 NetServer Terminator board – Used in secondary processor socket for a system with only one processor


PC BOARD
D7140-63014

HP LH3000 NetServer Terminator board – Used in secondary processor socket for a system with only one processor


INTERFACE
D6025C

Ultra3 SCSI host adapter


INTERFACE
D2140-69004

NetRAID-1Si One-Channel Disk Array Controller – PCI Board with One Internal 68 Pin High Density and One External 68 Pin Ultra High Density SCSI Connector (P/O D2140A)


INTERFACE
D5013-63003

LAN Adapter – PCI 10/100TX LAN Board for NetServer (D5013A)


INTERFACE
D5013B

LAN Adapter – PCI 10/100TX LAN Board for NetServer


INTERFACE
D5955-69001

NetRAID-3Si Three-Channel Disk Array Controller – PCI Board With Three Internal 68 Pin High Density and Three External 68 Pin High Density Ultra Wide SCSI Connectors (D5955A)


INTERFACE
D5955A

NetRAID-3si three-channel disk array controller – PCI board with three internal 68 pin high density and three external 68 pin high density Ultra wide SCSI connectors


INTERFACE
D6025B

Ultra2 SCSI host adapter


INTERFACE
D6028A

TopTools remote control card with battery (Version 1) – Allows emergency remote access using LAN or modem


INTERFACE
D9161-69004

NetRaid-4M four-channel disk array controller W/64MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors


INTERFACE
D9161A

NetRAID-4M Four-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors


INTERFACE
D9351-69004

NetRaid-4M four-channel disk array controller W/128MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors


INTERFACE
D9351A

NetRAID-4M Four-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors


INTERFACE
P3410-69003

NetRaid-1M single-channel Ultra3 SCSI disk array controller W/32MB cache – PCI board with one internal 68-pin High Density and one external 68-pin Very High Density Ultra3 SCSI connector


INTERFACE
P3410A

NetRAID-1M Single-Channel Disk Array Controller W/32MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors


INTERFACE
P3411-69004

NetRaid-2M dual-channel disk array controller W/64MB cache – PCI board with two internal 68-pin High Density and two external 68-pin Very High Density Ultra3 SCSI connectors


INTERFACE
P3411A

NetRAID-2M Dual-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors


INTERFACE
P3413-63001

Ultra160 LVD SCSI adapter board (Adaptec ASC-29160) – 64-bit, 66MHz PCI – External 68-pin High Density LVD connector, internal 68-pin Ultra160 LVD connector, internal 68-pin SE connector, internal 50-pin Narrow SE connector


INTERFACE
P3413A

Ultra 160 LVD SCSI adapter board (Adaptec ASC-29160) – 64 bit, 66MHz PCI – External 68 pin high density LVD connector, internal 68 pin Ultra 160 LVD connector, internal 68 pin single-ended connector, internal 50 pin narrow single-ended connector


INTERFACE
P3475-69003

NetRaid-2M dual-channel disk array controller W/128MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors


INTERFACE
P3482A

Gigabit LAN adapter – PCI-X 10/100/1000TX 3Com LAN card – (3Com 3C996-T)


INTERFACE
D2140A

NetRAID-1si – One-channel disk array controller – PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector


INTERFACE
P1218A

TopTools remote control card with battery (Version 2.0) – Allows emergency remote access using LAN or modem


INTERFACE
P3475A

NetRAID-2M Dual-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors


POWER SUPPLY
5064-6604

Power supply module – 300 watts


POWER SUPPLY
D8551A

Redundant power supply module – 300 watts – Includes secondary fan tray – Plugs Into the power supply cage


PROCESSOR
D8509-69000

Intel Pentium III processor – 533MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink


PROCESSOR
D8510-69000

Intel Pentium III ‘600EB’ processor – 600MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink


PROCESSOR
D8510A

Intel Pentium III ‘600EB’ processor upgrade – Includes one 600MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) processor with heat sink and voltage regulator module


PROCESSOR
D8511A

Intel Pentium III processor upgrade – Includes one 667MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) processor with heat sink and voltage regulator module


PROCESSOR
D9184-69000

Intel Pentium III processor – 733MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink


PROCESSOR
D9185-69001

Intel Pentium III processor – 800MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink


PROCESSOR
D9185A

Intel Pentium III ‘800EB’ processor upgrade – Includes one 800MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) processor with heat sink and voltage regulator module


PROCESSOR
P1807A

Intel Pentium III processor upgrade – Includes one 933MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache, Slot 1) processor with heat sink and voltage regulator module


PROCESSOR
D8509A

Intel Pentium III ‘533EB’ processor upgrade – Includes one 533MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) processor with heat sink and voltage regulator module


PROCESSOR
D8511-69000

Intel Pentium III processor – 667MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink


PROCESSOR
D9184-69000

Intel Pentium III processor – 733MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink


PROCESSOR
D9184A

Intel Pentium III processor upgrade – Includes one 733MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) processor with heat sink and voltage regulator module


PROCESSOR
P1807-69001

Intel Pentium III processor – 933MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink


PROCESSOR
P2488-69001

Intel Pentium III processor – 1.00GHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink


PROCESSOR
P2488A

Intel Pentium III Processor upgrade – Includes one 1000MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) processor, voltage regulator, and heat sink