PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (USA)

‘Windows’ keyboard assembly (Quartz Gray, 105 key) – Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ABY, Danish)

IDE drive ribbon cable – 40-pin (F) connector marked ‘System’ to a 40-pin (F) connector marked ‘Drive 0’ and a 40-pin (F) connector marked ‘Drive 1’ – 35cm (13.8in) long – From CD-ROM or hard drive to connector on the system processor board

Floppy drive ribbon cable – 34-pin (F) connector marked ‘to system board’ to 34-pin (F) connector – 26.7cm (10.5in) long – From floppy drive to FDD connector on the system processor board

Ultra2 Wide Low Voltage Differential/Single-Ended SCSI ribbon cable with termination – Has five 68-pin (M) connectors: four for internal devices and one for the system board SCSI controller – 89cm (35in) long

Ultra2 Wide Low Voltage Differential/Single-Ended SCSI ribbon cable with termination – Has five 68-pin (M) connectors: four for internal devices and one for the system board SCSI controller – 89cm (35in) long

Chassis assembly – Includes internal metal chassis and the exterior cover assembly (U-shaped)

Front bezel – Includes E200 nameplate

Tubeaxial fan – For cooling the processors and other components – Mounts on the inside rear of the chassis assembly

HP rack mount kit for NetServer E60, E200, and E800 – Includes pair of rails, plastic bezel trim, mounting hardware, and installation instructions

Airflow guide – Directs air to the processors for cooling – Mounts in front of the fan

9.1GB Ultra Wide SCSI hard drive module – 7,200 RPM

20GB Ultra ATA/100 IDE hard disk drive – 5400 RPM, 3.5in form factor, 1.0in high – (Seagate, U6 series, ST320410A)

20GB Ultra ATA/100 IDE hard disk drive – 5400 RPM, 3.5in form factor, 1.0in high – (Seagate, U6 series, ST320410A)

9.1GB Ultra Wide SCSI hard drive module – 7,200 RPM

18.2GB Ultra Wide SCSI hard drive – 7,200 RPM, 3.5-inch form factor

8.4GB Ultra ATA/66 IDE hard drive – 3.5-inch form factor, 1.0-inch high

15.0GB Ultra ATA/66 IDE hard disk drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high (Maxtor – 51536U3)

9GB Ultra3 SCSI hard drive module – 10000 RPM, 3.5in form factor, low profile

18GB Ultra3 SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high – Comes mounted on a drive tray

10.0GB Ultra ATA/66 IDE hard disk drive – 5400 RPM, 3.5in form factor, 1.0in high

20GB Ultra ATA/100 hard drive – 5,400 RPM, 3.5-inch form factor (Seagate, U5 series, ST320413A)

30GB Ultra ATA/100 IDE hard drive – 7200 RPM, 3.5in form factor, 1.0in high

10/20GB SureStore T20i Single-Ended Narrow SCSI-2 internal Travan TR-5 tape drive – Includes tape and software

1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height – (Part of D2035A/B)

256MB, 133MHz ECC SDRAM DIMM memory module – For NetServer E200 for HP E200

256MB, 133MHz ECC SDRAM DIMM memory module – For NetServer E200 for HP E200

64MB, 133MHz ECC SDRAM DIMM memory module – (D8264A) – for HP E200

128MB, 133MHz ECC SDRAM DIMM memory module – (D8265A) -for HP E200

128MB, 133MHz ECC SDRAM DIMM memory module – (D8265A) -for HP E200

HP E200 NetServer ATI Rage II AGP graphics board with 4MB SDRAM – ATI Rage II AGP Graphics Board with 4MB SDRAM – Plugs Into the AGP Slot on the System Processor Board

HP E200 NetServer System Processor Board – Single processor 133 front side bus with integrated dual channel SCSI controller and AGP slot

LAN Adapter – PCI 10/100TX LAN Board for NetServer

PCI Wide SCSI host adapter board – Wide SCSI Host Adapter Board – Installed in PCI Socket on System Backplane Board – May Need Cables D5968A and D6001A

NetRAID-1si – One-channel disk array controller – PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector

LAN Adapter – PCI 10/100TX LAN Board for NetServer (D5013A)

Wide SCSI Host Adapter Board (D5025A) – Installed in PCI Socket on System Backplane Board

15.0GB Ultra ATA/66 IDE hard disk drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high

NetRAID-1M Single-Channel Disk Array Controller W/32MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

Power supply – Autoranging 110/220VAC input, 50-60Hz, 256 watts – Has fan speed control – For worldwide use

Intel Pentium III ‘800EB’ processor – 800MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache, Slot 1) for HP E200 PIII/800 NetServer

Intel Pentium III processor – 1.0GHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache, Slot 1)

Intel Pentium III processor – 933MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache, Slot 1) for HP E200 PIII/933

Intel Pentium III processor – 733MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink for HP E200 PIII/733 NetServer

Intel Pentium III processor – 667MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache, Slot 1) for HP E200 PIII/667 NetServer

Intel Pentium III ‘600EB’ processor – 600MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache, Slot 1) for HP E200 PIII/600

Intel Pentium III processor – 866MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache, slot 1) for HP E200 PIII/866