‘VIZUALIZE’ PS/2 keyboard assembly (Quartz Gray, 102 key layout) – Has attached 1.8m (6.0ft) cable with 6-pin mini-DIN connector (European French)

HP-HIL keyboard replacement kit – Replaces HP-HIL keyboard with PS/2 keyboard – French

Fast Wide SCSI ribbon cable with ferrite and termination – Has four 68-pin (M) connectors – 64.8cm (25.5in) long – From hard dives to drive interconnect board on the rear of the drive tray

Disk power cable – 4-pin (F) connector marked ‘PCB end’ and four other 4-pin (F) connectors – 74cm (29.2in) long – From drive interconnect board to all of the devices in the drive tray

Video cable with Enhanced Video Connectors (EVC) on both ends – 1.8m (6.0ft) long

SCSI ribbon cable with termination – 50-pin (F) connector marked ‘Single-Ended SCSI disk interface board’ and 50-pin (F) connector marked ‘Single-Ended SCSI device’ – 30.5cm (12in) long – From multimedia drives to drive interconnect board on the rear of t

Floppy drive ribbon cable – 34-pin (F) connector marked ‘Disk interface board’ to 34-pin (F) connector marked ‘Floppy drive’ – 38.7cm (15.3in) long – From floppy drive to drive interconnect board on the rear of the drive tray

Ribbon cable – Has two 26-pin (F) connectors marked ‘Human interface’ – 36.2cm (14.3in) long – From human interface board to drive interconnect board on the rear of the drive tray

CD audio cable – 3-pin (F) connector to 3-pin (F) connector – 23cm (9in) long – From system board to CD-ROM drive

HP-HIL cable (coiled) – 2.5m (8.2ft) long – For the 46021x series of keyboards

Chassis assembly (Quartz gray) – Includes all covers, the light pipe, vented disk filler panels, main tray, disk drive tray, and rear panel assembly (with handle)

Floppy drive bezel – Complete front panel for the floppy drive – Includes bezel, door, button, & lite pipe – Quartz Gray

Floppy drive bezel – Complete front panel for the floppy drive – Includes bezel, door, button, & lite pipe – Quartz Gray

Tubeaxial fan – (Does NOT include the diffuser) – Mounts to the rear panel (Two used)

Rubber foot (Misty Blue, L-shaped) – Replacement rubber foot for the bottom of the computer case (four used)

VISUALIZE-FX4 graphic accelerator board – 24+24/8 bit performance 3D solids – Has EVC video connector – Requires HP-UX 10.20 with Additional Core Enhancements (ACE)

Hyper CRX-8 graphics adapter board – With 8/8 double buffered image planes for 2D vector and 3D wireframe

Hyper CRX-24 graphics adapter board – With 24/8 bit planes for accelerated 2D imaging

VISUALIZE-48 (Hyper CRX-48Z3) accelerated 3D solids graphics adapter – With 24/24 double buffered image planes for 2D imaging and 3D wireframe

Video out board – Provides NTSC, PAL, and S-video outputs – Ships with no cables – For A4070B, A4071B, A4079B, A4211A, A4244A, A4246A, A4441A, A4442A in HP9000 B/C/J class

VISUALIZE-IVX-24 2D only imaging accelerator – For 2D imaging (Includes B5182AA software)

VISUALIZE-8 accelerated 3D solids graphics adapter – With 8 image planes for 2D imaging and 3D wireframe

VISUALIZE-8 accelerated 3D solids graphics adapter – With 8 image planes for 2D imaging and 3D wireframe

VISUALIZE-24 accelerated 3D solids graphics adapter – With 24 image planes for 2D imaging and 3D wireframe

VISUALIZE-24 accelerated 3D solids graphics adapter – With 24 image planes for 2D imaging and 3D wireframe

VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics – Includes color recovery – Has EVC video output connector

VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics – Includes color recovery – Has EVC video output connector

VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics – Includes color recovery – Has EVC video output connector

VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics – Includes color recovery – Has EVC video output connector

Dual VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics – Includes color recovery – Has EVC video output connector

Dual VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics; includes color recovery – Has EVC video output connector

HP VISUALIZE-fx2 graphic accelerator board – 24/8 bit accelerated 3D solids – Has EVC video connector – Requires HP-UX 10.20 with ‘Additional Core Enhancements’ (ACE)

HP VISUALIZE-fx2 graphic accelerator board – 24/8 bit accelerated 3D solids – Has EVC video connector – Requires HP-UX 10.20 with ‘Additional Core Enhancements’ (ACE)

VISUALIZE-FX2 graphic accelerator board – 24/8 bit accelerated 3D solids – Has EVC video connector – Requires HP-UX 10.20 with ‘Additional Core Enhancements’ (ACE)

VISUALIZE-FX4 graphic accelerator board – 24+24/8 bit performance 3D solids – Has EVC video connector – Requires HP-UX 10.20 with ‘Additional Core Enhancements’ (ACE)

VISUALIZE-IVX-24 2D only imaging accelerator – For 2D imaging (Includes B5182AA software)

Enhanced Video Connector (EVC) video adapter cable – EVC (F) to 15-pin (M) – 7.87in (0.2m) long – Used to connect EVC video output to 15-pin monitor connector – (A4167A)

Enhanced Video Connector (EVC) video adapter cable – EVC (M) to 15 pin (F), 20cm (7.87in) long – Used to connect EVC video output to a 15-pin monitor connector

Enhanced Video Connector (EVC) video adapter cable – EVC (M) to 15-pin (F), 20cm (7.87in) long – Used to connect EVC video output to 15-pin monitor connector

Enhanced Video Connector (EVC) video adapter cable – EVC (F) to 15-pin (M), 20cm (7.87in) long – Used to connect EVC video output to 15-pin monitor connector

PS/2 optical scrolling mouse – Two button mouse with scrolling wheel – Has 1.75m (69in) long cable with 6-pin mini-DIN connector

HP-HIL three-button mouse (Parchment White) – Has attached 7.71ft (2.35m) cable with 4-pin HP-HIL connector – For use with the 46021x series of keyboards (Part of A1099C)

HP-HIL three-button mouse replacement kit – Replaces HP-HIL mouse with PS/2 mouse – Replaces A2838A HP-HIL mouse with a PS/2 mouse – For use with the 46021x series of keyboards

PS2 optical scroll mouse (Jack Black)

1.42/1.44MB 3.5in high-density disks (Unformatted) (10/BOX)

12GB/24GB Single-Ended SCSI DDS-3 DAT tape drive with Flint Gray bezel

2GB/4GB Single-Ended SCSI DDS-1 DAT tape drive with Flint Gray bezel

1.44MB Single-Ended SCSI-2 floppy drive with Flint Gray bezel

4GB/8GB Single-Ended SCSI DDS-2 DAT tape drive with Flint Gray bezel

Narrow Single-Ended SCSI-2 slot load DVD-ROM drive – 6X DVD-ROM read, 32X CD-ROM read (Pioneer DVD-303/304) – Has headphone jack and volume control – May be used as replacement for a CD-ROM drive

1.44MB Single-Ended SCSI-2 floppy drive

2.0GB Differential Fast Wide SCSI-2 hard drive – 7,200 RPM, 3.5-inch form factor

4.0GB Fast Wide Differential SCSI-2 hard drive – 7,200 RPM, 3.5-inch form factor – (Part of A4477A)

2.0GB Fast Wide Differential SCSI-2 hard disk drive – 3.5-inch form factor, low profile – (Part of A4460A)

4.0GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor – (Part of A4461A)

9.1GB Differential Fast Wide SCSI-2 hard drive – 7,200 RPM, 3.5-inch form factor – (Part of A4485A)

2.0GB Differential Fast Wide SCSI-2 hard disk drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high

4.0GB Differential Fast Wide SCSI-2 hard disk drive – 7,200 RPM, 3.5-inch form factor, 1.6in high

9.1GB Differential Fast Wide SCSI-2 hard disk drive – 7,200 RPM, 3.5-inch form factor, 1.6in high

12GB/24GB Single-Ended SCSI-2 DDS-3 (DAT) tape drive – 5.25-inch form factor – (part of A3542A, A4249A)

4GB/8GB Single-Ended SCSI-2 DDS-2 (DAT) tape drive – 5.25-inch form factor – (Part of A4216A)

Single-Ended SCSI-2 slot load DVD-ROM drive kit – 6X DVD-ROM read, 32X CD-ROM read – Includes drive with headphone jack & volume control, instruction sheet, and CD audio cable – (Pioneer DVD-303/304 mechanism)

64MB, 72-pin ECC DIMM memory module for HP9000 C160

32MB ECC memory upgrade kit – Includes two 16MB SIMM modules

32MB ECC memory upgrade kit – Includes two 16MB SIMM modules

128MB ECC DIMM memory upgrade kit – Includes two 64MB DIMM modules

128MB ECC DIMM memory upgrade kit – Includes two 64MB DIMM modules

64MB ECC memory upgrade kit – Includes two 32MB SIMM modules

64MB ECC memory upgrade kit – Includes two 32MB SIMM modules

32MB, 72-pin ECC DIMM memory module for HP9000 C160

16MB, 72-pin ECC DIMM memory module for HP9000 C160

HP9000 C160 Hyper CRX-8 Graphics Adapter – with 8/8 Double Buffered Image Planes for 2D Vector and 3D Wireframe (P/O A4070B, 1 of 2 Boards in A4079B, 1 of 2 Boards in A4441A)

HP9000 C160 Power distribution board

HP9000 Worksation Human Interface Board – Includes Power Switch, Status LED’s, and Audio I/O – Mounts on the Lower Front of the Drive Tray²

HP9000 C160 I/O Board Assembly (‘L’ Shaped) – Includes Rear Panel Audio In/Out and SCSI/Parallel Connectors – Mounts on the Right Side of the Computer

HP9000 Worksation C160 160MHz System Processor Board (PA 8000 Based) – Mounts on Mounts on the Left Side of the Computer

HP9000 C160 Backplane Board (with Option Board Slot Connectors) – Vertical Board in the Center of the Computer

HP9000 C160 I/O Connector Board – Small Board (on Rear Left Side) with 10BT LAN, Serial Ports, and Mouse/Keyboard Connectors

HP9000 C160 Z-Buffer Accelerator Board (A4242A, 1 of 2 Boards in A4079B, 1 of 2 Boards in A4441A, 1 of 2 Boards in A4442A) – For HyperCRX-8 (A4070B) or HyperCRX-24 (A4071B) Graphics Boards

HP9000 Worksation Front Plane Board, 3-Wide – Attached to Top of Boards (1 of 4 Boards or 1 of 5 Boards in a 3-Wide A4211A/A4244A/A4246A Configuration)

HP9000 C160 Front Plane Board, 2-Wide – Attached to Top of Boards (1 of 3 Boards in a 2-Wide A4211A/A4244A/A4246A Configuration – 3-Wide Configurations have 4 or 5 Boards)

HP9000 C160 Geometry Accelerator Board (1 of 3 Boards in a 2-Wide Configuration – 3-Wide Configurations have 4 or 5 Boards) Part of A4211A or A4244A

HP9000 C160 Frame Buffer Board (1 of 3 Boards in a 2-Wide A4211A or A4244A Configuration – 3-Wide Configurations have 4 or 5 Boards)

HP9000 C160 Visualize 48 board kit – Includes 3-wide Front Plane Board, Geometry Accelerator Board, and Frame Buffer Board (Part of A4211A or A4244A)

HP9000 C160 Video out board – Mounted on the VISUALIZE-48XP frame buffer and geometry accelerator board – (Part of A4248A) – For A4070B, A4071B, A4079B, A4211A, A4244A, A4246A, A4441A, A4442A in HP9000 B/C/J Class

HP9000 C160 Video out board – Mounted on the VISUALIZE-48XP frame buffer and geometry accelerator board – (Part of A4248A) – For A4070B, A4071B, A4079B, A4211A, A4244A, A4246A, A4441A, A4442A in HP9000 B/C/J Class

HP9000 C160 VISUALIZE-IVX – 1280 X 1024 Accelerated 2D Only 24-Plane Color Graphics Controller with 8 Overlay Planes (1 of 2 Boards in A4333A)

HP9000 Worksation C160 VISUALIZE-FX2 graphics board – 1280 × 1024 accelerated 3D solids double-buffered 12-plane color graphics board with 8 overlay planes – (Part of A4552A)

HP9000 Worksation C160 Hyper CRX-24 Graphics Adapter Board (P/O A4071B, 1 of 2 Boards in A4442A)

HP9000 C160 Drive Interconnect Board Kit – Includes 2 Thumbscrews and Board – Mounts on Rear of Drive Tray

Worksation C160 Human Interface Board – Includes Power Switch, Status LED’s, and Audio I/O – Mounts on the Lower Front of the Drive Tray

HP9000 C160 VISUALIZE-FX4 graphics board – 1280 × 1024 accelerated 3D solids double-buffered 24-plane color graphics board with 8 overlay planes – (Part of A4553B, replacement for A4553A)

PSI Board – Provides SNA/X.25 LAN Connection (P/O J2159A) – Plugs into an EISA Bus Slot

Token Ring (IEEE 802.5 network) interface board – Plugs into an EISA bus slot – (Part of J2165A)

Token ring (IEEE 802.5 networks) interface board – Plugs into an EISA bus slot

High speed X.25 board – Provides line speed up to 1.5 Mbps – Plugs into an EISA bus slot

385-watt power supply kit – Includes power supply, power distribution board, power distribution bracket, and speaker assembly – Mounts in right side of computer