USB keyboard with PC-105 layout – Has 2.9m (10ft) cable with type (A) USB connector (Option ABF – European French)

Audio cable assembly – For CD-ROM, CD-RW, or DVD-ROM – 4-pin (F) connector to 4-pin (F) connector – 47.8cm (18.8in) long – From CD-ROM drive to system processor board

IDE CD-ROM drive ribbon cable with ferrite – 40-pin (F) connector marked ‘to PCA’ to a 40-pin (F) connector marked ‘to CD-ROM’ – 34cm (13.4in) long – From CD-ROM drive to system processor board

IDE CD-ROM drive ribbon cable with ferrite – 40-pin (F) connector marked ‘to PCA’ to a 40-pin (F) connector marked ‘to CD-ROM’ – 34cm (13.4in) long – From CD-ROM drive to system processor board

Ultra SCSI/Low Voltage Differential (LVD) SCSI cable – Has one 68-pin (M) connector on each end – 0.6m (2ft) long – From SCA hard drive backplane board to system processor board

Floppy drive ribbon cable with ferrite – 34-pin (F) connector marked ‘to PCA’ to 34-pin (F) connector marked ‘to floppy’ – 43.2cm (17in) long

Ribbon cable – DB-25 (M) connector to 20-pin (F) connector – 46cm (18in) long – From LCD display to system processor board

Drive power cable – Two 4-pin (F) connectors with four wires and a 4-pin (F) connector with two wires – 85cm (33.5in) long – From CD-ROM and floppy drives to system processor board

Chassis assembly – Includes: 2 rear fans, hard drive/memory fan, I/O card fan, I/O card guide with speaker, I/O card bracket, air divider, IDE, FDD, and SCSI LVD power and data cables, status panel with cable, drive trays, and the front bezel assembly

Front bezel assembly – Includes front bezel with molded in display bezel and power button, blank CD-ROM and floppy filler panels, and security lock

Tubeaxial fan (Panaflo model FBA09A12H) 92mm x 92mm x 25mm thick fan with 22cm long three wire cable – 12VDC nominal operating voltage – Mounts to the I/O card cage bracket

Tubeaxial fan kit (Panaflo model FBA12G12H) – 120mm x 120mm x 37mm thick fan with 30cm long 3-wire cable – 12VDC nominal operating voltage – Includes ESD wrist strap and instructions – Mounts on the rear of the chassis assembly (Two used)

Tubeaxial fan (Panaflo FBA08T12H) – 80mm x 80mm x15mm fan with three wire cable – 12VDC nominal operating voltage – For memory and hard drive cooling – Mounts on the side of the hard drive bay

Tubeaxial fan (Panaflo model FBA09A12H) 92mm x 92mm x 25mm thick fan with 22cm long three wire cable – 12VDC nominal operating voltage – Mounts to the I/O card cage bracket

Tubeaxial fan kit (Panaflo model FBA12G12H) – 120mm x 120mm x 37mm thick fan with 30cm long 3-wire cable – 12VDC nominal operating voltage – Includes ESD wrist strap and instructions – Mounts on the rear of the chassis assembly (Two used)

Tubeaxial fan (Panaflo FBA08T12H) – 80mm x 80mm x15mm fan with three wire cable – 12VDC nominal operating voltage – For memory and hard drive cooling – Mounts on the side of the hard drive bay

Rack mount kit – Includes the rack mount base, left and right rack ear panels, heavy duty slide rails, various screws, nuts, spacers, and an installation guide

HP VISUALIZE-FX5 Pro PCI graphics card – 64MB SDRAM memory

HP VISUALIZE-fx10 Pro (Revision B) PCI graphics card with 128MB DDR SDRAM memory

HP VISUALIZE-fxe PCI graphics card – 3.5MB of texture memory (18MB SDRAM total memory), 32-bit, 66MHz

HP VISUALIZE-fxe PCI graphics card with 9.5MB of texture memory (24MB SDRAM total memory) , 32-bit, 66MHz

USB 3-button mouse (Quartz Gray) – Has 2.9m (10ft) cable with type (A) USB connector

USB 3-button scrolling mouse (Carbon Black) – Has 2.9m (10ft) cable with type (A) USB connector

ATAPI IDE DVD-ROM drive – 16x-max DVD-ROM read, 48x-max CD-ROM read – Half height drive with Carbon Black faceplate

9.1GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST39102LC)

9.1GB Ultra2 Wide SCSI LVD hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high, and 80-pin SCA connector (Quantum Atlas V, 3.5 series)

18GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST318203LC)

9.1GB Ultra2 wide SCSI LVD hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

18GB Ultra2 Wide SCSI LVD hard drive – 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector

36GB Ultra2 Wide LVD SCSI hard drive – 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector

73GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

73GB Ultra2 Wide SCSI LVD hard drive – 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector

36.4GB hot-plug Wide Ultra2 SCSI Low Voltage Differential (LVD) hard drive – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

IDE CD-RW drive – 24X CD-R write, 10X CD-RW rewrite, 40X CD-ROM read

1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height

9.1GB Ultra2 wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

32x-max CD-ROM drive – Half-height CD-ROM drive with ATAPI IDE connector

1.44MB floppy drive – 3.5-inch form factor with IDE PC/AT interface

256MB, 120MHz SDRAM DIMM memory module for HP9000 C3650

1024MB, 120MHz SDRAM DIMM memory module for HP9000 C3650

128MB, 120MHz SDRAM DIMM memory module for HP9000 C3650

256MB, 120MHz SDRAM DIMM memory module for HP9000 C3650

512MB, 120MHz SDRAM DIMM memory module for HP9000 C3650

1024MB, 120MHz SDRAM DIMM memory module for HP9000 C3650

128MB, 120MHz SDRAM DIMM memory module for HP9000 C3650

512MB, 120MHz SDRAM DIMM memory module for HP9000 C3650

C3650 Workstation VISUALIZE-FX5 Pro PCI graphics card – 64MB SDRAM memory

HP9000 Workstation HP VISUALIZE-fxe PCI graphics board – 3.5MB of texture memory (18MB SDRAM total memory), 32-bit, 66MHz – (Part of A4982A)

HP9000 C3650 HP VISUALIZE-fxe (rev B) PCI graphics board – 9.5MB of texture memory (24MB SDRAM total memory), 32-bit, 66MHz – (Part of A4982B)

HP9000 WORKSTATION C3650 SCA (Single connector attach) hard disk backplane PCA – Has one female 68-PIN connector, and two 80-PIN SCA hard drive connectors – Mounts to the rear of the hard drive bay

HP9000 Workstation C3650 VISUALIZE-fx10b Pro PCI graphics board – 128MB DDR SDRAM memory

HP9000 C3650 SCA (Single connector attach) hard disk backplane PCA – Has one female 68-PIN connector, and two 80-PIN SCA hard drive connectors – Mounts to the rear of the hard drive bay

HP9000 Workstation C3650 System processor board assembly – Includes one 625MHz PA-RISC 8700 processor (Can run either HP-UX 11.0 or 11i) – Mounts in the right side of the chassis assembly

LAN adapter – 1000Base-SX PCI Gigabit Ethernet LAN adapter – Supports all PCI bus configurations

LAN adapter – 1000Base-T PCI Gigabit Ethernet LAN adapter – Supports all PCI bus configurations

1Gbps Tachyon TL PCI 2x Fiber Channel (FC) adapter – Single channel, short wave – Has SC connectors

2Gbps Tachyon XL2 PCI Fiber Channel adapter – For HP-UX operating system – Single channel, short wave, 64-bit, 66MHz PCI – Has LC connectors

WAN adapter – Two port X.25 PCI frame relay adapter card

1Gbps Tachyon TL PCI 2x Fiber Channel (FC) adapter – Single channel, short wave – Has SC connectors

2Gbps Tachyon XL2 PCI Fiber Channel adapter – For HP-UX operating system – Single channel, short wave, 64-bit, 66MHz PCI – Has LC connectors

WAN adapter – Four port X.25 frame relay adapter card

Power supply assembly (500 watts) – Includes power supply, safety interlock switch, and AC power connector – Mounts in the lower left of the chassis assembly