‘VIZUALIZE’ PS/2 keyboard assembly (Quartz Gray, 102 key layout) – Has attached 1.8m (6.0ft) cable with 6-pin mini-DIN connector (European French)

Video cable – Three BNC (M) connectors to three BNC (M) connectors – 3m (9.8ft) long

Video cable – Three BNC connectors (M) to three BNC connectors (M) – 3m (9.8ft) long

RGB color video cable – 15 pin (M) to 3 BNC (M) connectors – 1.8m (6.0ft) long

Single-ended SCSI-2 interface cable with thumbscrews on both ends – 50 pin high density (M) to 50 pin high density (M) – 1.0m (3.3ft) long

SCSI interface cable with thumbscrews on both ends – 50 pin high density (M) to 50 pin high density (M) – 1.5m (4.9ft) long

Single-ended SCSI-2 interface cable with thumbscrews on both ends – 50 pin high density (M) to 50 pin high density (M) – 2.0m (6.6ft) long

Single-ended SCSI-2 interface cable with thumbscrews on both ends – 50 pin high density (M) to 50 pin high density (M) – 5.0m (16ft) long

Single-Ended SCSI-2 interface cable with thumbscrews on both ends – 50-pin high density (M) to 50-pin high density (M) – 1.0m (3.3ft) long – (C2908A)

SCSI ribbon cable – One 50-pin (F) connector on each end – 9.9cm (3.9in) long – From processor board to internal SCSI drive

Floppy drive ribbon cable – 34-pin (F) connector to 34-pin (F) connector – 12.7cm (5.0in) long

Single-ended SCSI-2 interface cable with thumbscrews on both ends – 50 pin high density (M) to 50 pin high density (M) – 0.5m (1.6ft) long

Chassis assembly – Includes top cover, bottom base, cover for the power supply board, empty floppy drive slot filler panel, and the AC input connector and cable

Floppy drive bezel – Mounts on the front panel

Tubeaxial fan – Includes cable assembly – Mounts under the power supply cover

Video board – Allows use of second monitor

Video board – Allows use of second monitor

High resolution graphics kit – VRAM board which allows 1280 × 1024 resolution on HP9000 Model 712

High resolution graphics kit – VRAM board which allows 1280 × 1024 resolution on HP9000 Model 712

1.44MB Single-Ended SCSI-2 floppy drive

1GB Single-Ended SCSI hard drive – 3.5-inch form factor, full height

270MB Single-Ended SCSI hard drive – 3.5-inch form factor, half height

1.44MB Single-Ended SCSI-2 floppy drive with Flint Gray bezel

525MB Single-Ended SCSI hard drive – 3.5-inch form factor, half height

120MB Single-Ended SCSI hard drive – 3.5-inch form factor, half height

32MB ECC SIMM memory module for HP9000 712/100

16MB ECC SIMM memory module for HP9000 712/100

8MB ECC SIMM memory module for HP9000 712/100

16MB ECC memory upgrade kit – Includes two 8MB SIMM modules

32MB ECC memory upgrade kit – Includes two 16MB SIMM modules

VRAM video memory board

8MB ECC memory upgrade kit – Includes two 4MB SIMM modules

HP9000 712/100 System Processor Board – for (80 MHz) 9000/712 System

HP9000 712/100 Video Board (A2878A, 1 of 2 Boards in A4217A) – Allows use of Second Monitor

HP9000 712/100 TeleShare board – Dual line fax, modem capabilities

HP9000 712/100 System Processor Board – for (60 MHz) 9000/712 System

RS-232C Serial (9 Pin Male Connector) Interface Board

LAN token ring (DB-9 connector) interface board

Combined RS-232C Serial (9 Pin Male Connector) and LAN AUI Interface Board

Combined RS-232C Serial (9 Pin Male Connector) and X.25 Interface Board

Switching power supply board (Astec AA16980-1) – 100-240VAC input, 47-66Hz – Four DC outputs, 70 watts