USB keyboard with PC-105 layout (Quartz Gray) – Has 2.9m (10ft) cable with type (A) USB connector (French)

Converter dongle – Short cable with a (M) DVI-I connector and a (F) 15-pin VGA connector – For connecting a VGA monitor to a DVI-I port on the graphics card

Management processor M-cable

Power supply interface cable (module) assembly – Includes the dual power supply interface connector, the low voltage cables, and the two internal power cables terminated with line filter/power recptacle assemblies

Data cable – For IDE CD-ROM/DVD drive

Data cable – For IDE CD-ROM/DVD drive

Hard drive power cable

Y-cable assembly for super-80mm fan – 6-wire (three per connector) fan cable

Y-cable assembly for 80mm fan – 12-wire (three per connector) fan cable

Flex cable – For the management processor card

SCSI cable A-channel – Has one connector at each end

SCSI cable B-channel – Has one connector at each end

Right side bezel for rack configurations (Flint Gray)

Deskside front bezel assembly (Flint Gray)

Left side bezel for rack configurations with latch (Flint Gray)

Super 80mm tubeaxial fan

Thin 80mm fan

Standard 80mm fan

80mm dual fan

Field rack mount kit – For field integration into 19-inch wide cabinets at customer location – Includes rails and bezel

ATI FireGL4 graphics card – Extreme 3D graphics board with 128MB DDR SDRAM memory, 300MHz/30-bit palette RAMDAC, Dual DVI-I digital dispay outputs, and one 3-pin mini DIN stereo output – Requires one AGP and one adjacent PCI slot – For Windows and HP-UX

NVIDIA Quadro2 EX graphics card (NV11GL based) – Entry 3D graphics board with 32MB SDR SDRAM, 350MHz RAMDAC, and one DB-15 analog monitor output – Requires one APG Slot – For Windows and Linux operating systems

ATI RADEON 7000 2D graphics card – Professional 2D graphics board with 32MB DDR SDRAM memory, 300MHz RAMDAC, one analog monitor output, and one DVI-I analog/digital dispay output – Requires one AGP slot

NVIDIA Quadro4 900 XGL AGP 4X graphics card (NV25GL based) – High-end 3D graphics board with 128MB DDR SDRAM, Dual 350MHz RAMDAC, and Two DVI-I analog/digital output – Requires one APG Slot – For Windows and Linux operating systems

ECI cover plate – Gray metal plate approximately 1.0-inches wide by 6.75-inches long

Main cover (Carbon Black) – Metal cover with blue-colored release handle

Deskside top cover

USB 3-button mouse (Quartz Gray) – Has 2.9m (10ft) cable with type (A) USB connector

Fan cage assembly (metal) – Front half of the processor airflow system

Main airflow guide (plastic)

Hot-swap hard drive slot filler panel (Carbon Black)

Filler panel – Used to cover an empty hard drive slot

Slimline optical drive bay filler panel (Gray plastic)

Slimline optical drive bay filler panel (Carbon Black plastic)

73GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive – 10,000 RPM, low profile, 80-pin SCA connector

IDE DVD-ROM drive – 8X-max read DVD, 24X-max read CD-ROM, slimline form factor – With Carbon Black faceplate

36GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive – 10,000 RPM, low profile, 80-pin SCA connector

36GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive – 10,000 RPM, low profile, 80-pin SCA connector

36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive – 15,000 RPM, low profile

73GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive – 10,000 RPM, low profile, 80-pin SCA connector

Slimline DVD-ROM drive (Gray) – 8X DVD-ROM read, 24X CD-ROM read

IDE slim form CD-RW/DVD-ROM combination drive (Flint Gray) – 12X-max write, 8X-max rewrite, 24X-max read CD, 8X-max read DVD

Slimline DVD-ROM/CD-RW drive (Gray) – 12X CD-R write, 8X CD-RW re-write, 24X CD-ROM read, 8X DVD-ROM read

Slimline DVD-ROM/CD-RW combination drive (Carbon Black) – 12X CD-R write, 8X CD-RW re-write, 24X read CD-ROM, 8X read DVD-ROM

36GB hot-plug Ultra320 Wide SCSI Low Voltage Differential (LVD) hard drive (Carbon Black) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

36GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

36GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

36GB hot-plug Ultra320 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

36GB hot-plug Ultra320 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

73GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

73GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

IDE CD-RW/DVD-ROM drive – 12X-max write, 8x-max re-write, 8X-max read DVD, 24X-max read CD-ROM, slimline form factor -With Carbon Black faceplate

Slimline DVD-ROM drive (Carbon Black) – 8X read DVD-ROM, 24X read CD-ROM

36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive – 15,000 RPM, low profile

8x-max read DVD, 24x-max read CD-ROM IDE slim form factor DVD-ROM drive (Gray)

36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module for HP Integrity rx2600

256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module for HP Integrity rx2600

512MB DDR-SDRAM memory upgrade kit – Includes two 256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules

1.0GB DDR-SDRAM memory upgrade kit – Includes two 512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules

2.0GB DDR-SDRAM memory upgrade kit – Includes two 1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules

512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module for HP Integrity rx2600

HP Integrity rx2600 ATI FireGL4 graphics card – Extreme 3D graphics board with 128MB DDR SDRAM memory, 300MHz/30-bit palette RAMDAC, Dual DVI-I digital dispay outputs, and one 3-pin mini DIN stereo output – Requires one AGP and one adjacent PCI slot

HP Integrity rx2600 System processor board (Does NOT include the processor or processor power module)

HP Integrity rx2600 Audio sound card – Provides 16-bit stereo mic in, headphone out, line in, line out – Requires one PCI slot Includes the audio card, stereo headphones, and internal audio cable – For Windows or HP-UX operating systems – For HP-UX operat

HP Integrity rx2600 NVIDIA Quadro2 EX graphics card (NV11GL based) – Entry 3D graphics board with 32MB SDR SDRAM, 350MHz RAMDAC, and one DB-15 analog monitor output – Requires one APG slot

HP Integrity rx2600 ATI RADEON 7000 2D graphics card – Professional 2D graphics board with 32MB DDR SDRAM memory, 300MHz RAMDAC, one analog monitor output, and one DVI-I analog/digital dispay output – Requires one AGP slot

HP Integrity rx2600 Management processor board – For controlling the system console, reset and power management functions – Includes SIO (remote, console and UPS), VGA and LAN connectors

HP Integrity rx2600 PCI backplane/riser board – Has four PCI slots

HP Integrity rx2600 SCSI backplane board – Has three connectors for hot-swap hard drives

HP Integrity rx2600 Audio sound card – Provides 16-bit stereo mic in, headphone out, line in, line out – Requires one PCI slot – For HP-UX operating system

HP Integrity rx2600 NVIDIA Quadro4 900 XGL AGP 4X graphics card (NV25GL based) – High-end 3D graphics board with 128MB DDR SDRAM, Dual 350MHz RAMDAC, and Two DVI-I analog/digital output – Requires one APG slot – For Windows and Linux operating systems

FireWire (IEEE-1394A) adapter – 3-port

Dual port PCI Fast Wide High Voltage Differential SCSI-3 adapter – Has two external very high density 68-pin connectors and two internal high density 68-pin connectors – For HP-UX operating system

Dual port PCI Fast Wide High Voltage Differential SCSI-3 adapter – Has two external very high density 68-pin connectors and two internal high density 68-pin connectors – For HP-UX operating system

100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) – Has four RJ-45 connectors – Require one 64-bit PCI slot – For HP-UX operating system

Single channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 15 devices – Has one 68-pin very high density external connector, and one 68-pin high density internal connector – For HP-UX operating system

Single channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 15 devices – Has one 68-pin very high density external connector, and one 68-pin high density internal connector – For HP-UX operating system

Dual channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 30 devices – Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors – For HP-UX operating system

Dual channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 30 devices – Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors – For HP-UX operating system

1000Base-SX Gigabit Ethernet network interface adapter board – Has one duplex fiber optic connector, requires one 64-bit PCI slot – For HP-UX operating system

Management processor board – For controlling the system console, reset and power management functions – Includes SIO (remote, console and UPS), VGA and LAN connectors – NOT supported in tower configurations

FireWire (IEEE-1394A) adapter – 3-port

1000Base-T Gigabit Ethernet network interface adapter board – Has one RJ-45 connector – Requires one PCI slot – For HP-UX operating system

100Base-TX LAN host adapter board with one RJ-45 port – Requires one PCI slot – Includes the board, software, software license, and installation instructions – For HP-UX operating system

10/100Base-T PCI network interface card with IPSec (3DES) – For Windows and Linux based systems

10/100Base-T IPSec (3DES) LAN host adapter board – With one RJ-45 connector – Reqires one PCI slot – For Windows and Linux operating systems

1000Base-TX LAN four port host adapter board – Supports all PCI bus configurations – Has four RJ-45 connectors – Requires one PCI slot – For HP-UX operating system

100Base-TX LAN host adapter board with one RJ-45 port – Requires one PCI slot – Includes the board, software, software license, and installation instructions – For HP-UX operating system

Processor power supply (or module) – DC to DC converter module with power supply cable (12V DC in, 1.5V DC at 100A nominal output)

Hot-swap redundant power supply – 650W

Hot-swap redundant power supply – 650W

Intel Itanium 2 processor – 1.0GHz (McKinley, 400MHz front side bus, 3.0MB Level-3 cache) – Mounts on the system processor board

Intel Itanium 2 processor – 900MHz (McKinley, 400MHz front side bus, 1.5MB Level-3 cache)

Intel Itanium 2 processor upgrade – Includes one 900MHz (200MHz front side bus, 1.5MB cache) processor

Intel Itanium 2 processor upgrade – Includes one 1.0GHz (200MHz front side bus, 3MB cache) processor