Type | Image | Référence | Description | Cotation |
---|
KEYBOARD | | 435302-001 | PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (USA) |
 |
CABLE | | 5183-6821 | Ribbon cable – 4-pin (F) connector to 3-pin (F) connector – 27.9cm (11in) long – From remote control card to I/O baseboard |
 |
CABLE | | 5183-6872 | Ultra2 SCSI/Low Voltage Differential (LVD) SCSI ribbon cable kit – One cable clamp and one cable – One 68-pin (M) connector on each end – 96.5cm (38in) long |
 |
CABLE | | 5183-6873 | Ultra2 LVD SCSI ribbon cable – 68-pin (M) connector marked ‘P2’ to very high density 68-pin (F) connector marked ‘P1’ with thumbscrews for connecting to external storage systems – 25.7cm (10.1in) long |
 |
CABLE | | 5183-6874 | Floppy disk drive ribbon cable – 34-pin (F) connector marked ‘to I/O board’ to 34-pin (F) connector marked ‘to P-Bay backplane’ – 54cm (21.3in) long – Long cable from the 3.5-inch floppy drive to the FDD connector on the I/O baseboard |
 |
CABLE | | 5183-6875 | IDE disk drive ribbon cable – 40-pin (F) connector marked ‘to system board’ to 40-pin (F) connector – 53.6cm (21.1in) long – Long cable from the IDE drive to the IDE connector on the I/O baseboard |
 |
CABLE | | 5183-6876 | Power cable – 20-pin (F) connector marked ‘BP1’ to 20-pin (F) connector marked ‘P1’ – 31.8cm (12.5in) long |
 |
CABLE | | 5183-6878 | Ultra2 LVDS SCSI ribbon cable (C15) – Cable is marked ‘PCI board to MS cage C15-90 ohm’ – 68-pin (M) connector to 68-pin (M) connector – 17.5cm (6.9in) long |
 |
CABLE | | 5183-6879 | IDE disk drive ribbon cable – Short cable from the IDE drive to the IDE connector on the I/O baseboard |
 |
CABLE | | 5183-6880 | Ribbon cable – 26-pin (M) edge connector marked ‘PCB’ to 26-pin (M) edge connector marked ‘Floppy’ – 21cm (8.3in) long – Short cable from the 3.5-inch floppy drive to the FDD connector on the I/O baseboard |
 |
CABLE | | 5183-6881 | SCSI ribbon cable kit (C15) – Includes a 68-pin (F) to 50-pin (F) adapter and a terminated cable marked ‘PCI board to MS Cage C15-90 ohm’ – 68-pin (M) connector to 68-pin (M) connector – 21.3cm (8.4in) long – For SCSI DDS (DAT) tape drive |
 |
CABLE | | 5183-6882 | Power cable – A 10-pin (F) connector to both a 48cm (18.9in) cable with a 4-pin (F) connector and a 17.5cm (6.9in) cable with a 6-pin (F) connector – For hot-swap cage |
 |
CABLE | | 5183-6884 | I2C bus cable assembly – Has 3-pin (F) connectors on each end – 21.4cm (8.4in) long – From system I/O baseboard to hot-swap backplane board |
 |
CABLE | | D3636C | SCSI interface cable with thumbscrews on both ends – Highly flexible 68-pin high density (M) to 68-pin high density (M) – 90 Ohms – 2.5m (8.2ft) long |
 |
CABLE | | D6020A | SCSI interface cable – Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends – 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long |
 |
CABLE | | D6021-63071 | Peripheral bay power cable – Short version |
 |
CABLE | | D6982A | SCSI interface cable – Highly flexible 68 pin high density (M) to 68 pin ultra high density (M) with offset connector – 5.0m (16ft) long |
 |
CABLE | | D6983A | SCSI interface cable – Highly flexible 68 pin high density (M) to 68 pin ultra high density (M) with offset connector – 10.0m (33ft) long |
 |
CABLE | | D7054-63013 | Cable assembly – From PCI LED board to I/O board |
 |
CABLE | | D7131A | SCSI interface cable – Highly flexible 68 pin high density (M) to 68 pin ultra high density (M) with offset connector – 1.0m (3.3ft) long |
 |
CABLE | | J1476A | Console switch cable – One cable used for each port – 2.4m (8ft) long – From the J1473A or J1474A Console switch to the computer |
 |
CABLE | | J1476B | Console switch cable – One cable used for each port – 2.4m (8ft) long – From the J1473A or J1474A Console switch to the computer |
 |
CABLE | | J1477A | Console switch cable – One cable used for each port – 4.6m (15ft) long – From the J1473A or J1474A Console switch to the computer |
 |
CABLE | | J1477B | Console switch cable – One cable used for each port – 4.6m (15ft) long – From the J1473A or J1474A Console switch to the computer |
 |
BEZEL | | D6021-63064 | Front panel display bezel – Mounts to the front of the server – Includes LCD |
 |
FAN | | D6021-63034 | Redundant hot-swap tubeaxial fan – Mounts in the fan cage |
 |
RACK MOUNT KIT | | C6287J | Rack mount kit – Used to mount 1 or 2 DLT 418/718/818 autoloaders in HP 19-inch racks – Includes shelf, bezel, filler panel, and hardware |
 |
RACK MOUNT KIT | | C6287JR | Rack mount kit – Used to mount 1 or 2 DLT 418/718/818 autoloaders in HP 19-inch racks – Includes shelf, bezel, filler panel, and hardware |
 |
RACK MOUNT KIT | | C6542A | SureStore 2U k rack kit for HP racks – 2 bay half height – Includes ‘Y’ power cable, 0.5M high density 68-pin SCSI cable, two doors, rails, and documentation |
 |
RACK MOUNT KIT | | C6543A | SureStore 3U k rack kit for HP racks – 4 half height or 2 full height – Includes ‘Y’ power cable, 0.5M high density 68-pin SCSI cable, two doors, rails, and documentation |
 |
RACK MOUNT KIT | | J1519A | Universal monitor rack mount kit – For any monitor up to 19-inch and 100 pounds – Quartz Gray |
 |
RACK MOUNT KIT | | J1519B | Universal monitor rack mount kit (Quartz Gray) – For any monitor up to 19-inch (max height 46cm (18.1-inches)) and 100 pounds |
 |
SWITCH | | J1474A | 8-port Console Switch – Connect up to eight computers to a single monitor, keyboard, and mouse – Includes rack mounting hardware – Must order connecting cables separately |
 |
SWITCH | | J1493A | 4-port Console Switch (Quartz Gray) – Connect up to four computers to a single monitor, keyboard, and mouse – Includes hardware, user manual, and power cable |
 |
COVER | | J1506A | Side cover kit for Rack System/E41 Cabinet – Includes eight 8U panels and two 9U panels – Panels are snap on/off molded plastic |
 |
COVER | | D7054-63017 | Fan bay cover assembly – Covers the hot swap fan bay |
 |
COVER | | J1507A | Side cover kit for Rack System/E33 or U33 Cabinet – Includes six 8U panels and two 9U panels – Panels are snap on/off molded plastic |
 |
COVER | | J1508A | Side cover kit – Includes four 8U panels and two 9U panels – Panels are snap on/off molded plastic – For Rack System/E25 or U25 Cabinet |
 |
COVER | | D7054-63014 | Top cover assembly – Includes top cover, hot plug PCI slot access panel, and reference label |
 |
PANEL | | D7054-63008 | PCI board slot filler panel |
 |
PANEL | | J1514A | 1U rackmount filler panels – For covering the empty slots on the front of the rack cabinet – Package of 6 panels |
 |
MOUSE | | C3751B | 2 button PS/2 serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-din connector |
 |
MOUSE | | C3751-60201 | PS/2 two-button serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-DIN connector – (Part of C3751B) |
 |
STORAGE SYSTEM | | C1354A | SureStore H/A tape array 5500 – Rack mount enclosure for up to five DLT80m DLT drives – With rail kit, install guide, users manual, two power cables, and four 0.5m (1.6ft) long SCSI cables |
 |
STORAGE SYSTEM | | C1354AR | SureStore H/A tape array 5500 – Rack mount enclosure for up to five DLT80m DLT drives – With rail kit, install guide, users manual, two power cables, and four 0.5m (1.6ft) long SCSI cables |
 |
STORAGE SYSTEM | | C5695A | HP SureStore Tape Rack Array – Includes rack mount enclosure for up to four removable drives, with rail kit, install guide, users manual, four power cables, two 2.5M (8.2ft) & one 0.9M (3.0ft) SCSI cable |
 |
STORAGE SYSTEM | | D5989B | NetServer Storage System/12 – External cabinet which can hold eight half height, or 12 low profile Ultra2 SCSI drives – Includes one Rack Storage 12 Ultra2 SCSI card |
 |
STORAGE SYSTEM | | D5989C | NetServer Storage System/12 – External cabinet which can hold eight half height, or 12 low profile Ultra2 SCSI drives – Includes one Rack Storage 12 Ultra160 SCSI card |
 |
STORAGE SYSTEM | | D5991A | NetServer Rack Storage 12/FC – Fiber channel mass storage enclosure – Can hold 8 or 12 Ultra2 SCSI drives – Includes one copper fiber channel cable and one copper GBIC |
 |
DRIVE | | P1166-69003 | 18.2GB ‘hot swap’ Ultra3 SCSI hard drive module – 10000 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer |
 |
DRIVE | | C6280F | SureStore 418 8 slot DLT autoloader – Includes one Ultra SCSI DLT 4000 drive, six cartridge magazines, SCSI cable and terminator, and five data cartridges |
 |
DRIVE | | C1555D | 24GB internal SureStore DAT 24i Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive (Flint) |
 |
DRIVE | | C1555DR | 24GB SureStore DAT 24i Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive |
 |
DRIVE | | C5172F | SureStore DLT library 4115wr 15 slot rack mount tape library – Includes one Fast Wide SCSI DLT 4000 drive, rack slides, three magazines, barcode reader, and accessories |
 |
DRIVE | | C5172J | SureStore DLT library 7115wr 15 slot rack mount tape library – Includes one Fast Wide SCSI DLT 7000 drive, rack slides, 3 magazines, barcode reader, and accessories |
 |
DRIVE | | C5173F | SureStore DLT library 4215wr 15 slot rack mount tape library – Includes two Fast Wide SCSI DLT 4000 drives, rack slides, three magazines, barcode reader, and accessories |
 |
DRIVE | | C5173J | SureStore DLT library 7215wr 15 slot rack mount tape library – Includes two Fast Wide SCSI DLT 7000 drives, rack slides, three magazines, barcode reader, and accessories |
 |
DRIVE | | C5697A | 20/40GB hot-swap SureStore DLT40r removable DLT drive – Includes manuals, software on a CD-ROM, DLT tape IV media, and cleaning cartridge |
 |
DRIVE | | D6021-63041 | 1.44MB, 3.5-inch floppy drive with bezel |
 |
DRIVE | | D6021-63067 | IDE slimline CD-ROM drive – 24X CD-ROM read |
 |
DRIVE | | D6104-69001 | 4.2GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM |
 |
DRIVE | | D6106-69001 | 9.1GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6106A) |
 |
DRIVE | | D6106A | 9.1GB ‘hot swap’ Ultra2 SCSI hard drive module – 7200 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer |
 |
DRIVE | | D6107-69001 | 9.1GB hot-swap Ultra2 SCSI hard drive module – 10,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6107A) |
 |
DRIVE | | D6107A | 9.1GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer |
 |
DRIVE | | D7174-69000 | 18GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D7174A) |
 |
DRIVE | | D7174A | 18GB ‘hot swap’ Ultra2 SCSI hard drive module – 7200 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer |
 |
DRIVE | | D7175-69000 | 18.2GB hot-swap Ultra2 SCSI hard drive module – 10,000 RPM – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D7175A) |
 |
DRIVE | | D7175A | 18GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer |
 |
DRIVE | | D9419-69002 | 36.4GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer – (D9419A) |
 |
DRIVE | | D9421-69001 | 18.2GB hot-swap Ultra3 SCSI hard drive module – 15,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D9421A) |
 |
DRIVE | | P1168-69003 | 9.1GB hot-swap Ultra3 SCSI hard drive module – 10,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1168A) |
 |
DRIVE | | P1216-69001 | 18.2GB hot-swap Ultra3 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1216A) |
 |
DRIVE | | P1217-69001 | 9.1GB hot-swap Ultra3 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1217A) |
 |
DRIVE | | P3577-69001 | 73.4GB hot-swap Ultra3 SCSI hard drive module – 10,000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer |
 |
MEMORY | | D7132-69000 | 64MB SIMM memory module for NetRAID 3Si disk array controller for HP LXr8500 |
 |
MEMORY | | D7138-69001 | 512MB, 100MHz, registered ECC SDRAM DIMM memory module foR HP LXr8500 |
 |
MEMORY | | D7138A | 256MB, 100MHz, registered ECC SDRAM DIMM memory module for HP LXr8500 NetServeR |
 |
MEMORY | | D9325-69000 | 256MB, 100MHz ECC SDRAM DIMM memory module for LXr8500 |
 |
MEMORY | | D9325A | 512MB, 100MHz, registered ECC SDRAM DIMM memory module for HP LXr8500 NetServeR |
 |
PC BOARD | | D7054-69005 | HP LXr8500 Memory board – Has 16 slots for DIMMs – DIMMs can be installed in any DIMM slot and in any combination |
 |
PC BOARD | | D6028-69002 | HP LXR8500 NetServer Remote Control Board with 4 Pin I2C Cable (D6028A) |
 |
PC BOARD | | D6021-63030 | LXr8500 ‘Hot Swap’ SCSI Backplane Board – for the ‘Hot Swap’ SCSI Drives – Mounts in the Rear of the ‘Hot Swap’ Drive Cage |
 |
PC BOARD | | D6021-63031 | HP LXr8500 SCSI Management Board – Manages SCSI Drive Activity – Plugs Into the Hot Swap SCSI Backplane Board |
 |
PC BOARD | | D6021-63039 | LXr8500 NetServer Peripheral Bay Interconnect Board – Mounts Behind the Peripheral Bay on the Bottom Left Side of the Chassis |
 |
PC BOARD | | D6021-63040 | HP LXr8500 Peripheral Bay Backplane – Mounts behind the Peripheral Bay Drives – Has Connectors for Internal Drives |
 |
PC BOARD | | D6021-63072 | HP LXr8500 I/O Riser Board – Has Muticolored Ports for Video, Mouse, and Keyboard – Plugs into I/O Riser Port on I/O Board |
 |
PC BOARD | | D7054-63006 | LXr8500 Hot Plug PCI Activity LED Board – Mounts to I/O Tray |
 |
PC BOARD | | D7054-69001 | HP LXr8500 Mid-Plane PC Board – Board That Connects the I/O Baseboard, Memory Boards, and the Processor Baseboard – Mounts Vertically in the Center of the Chassis |
 |
PC BOARD | | D7054-69003 | HP LXr8500 I/O Baseboard – Has 10 64-bit Hot Plug PCI Accessory Card Slots – Plugs into the Midplane Board |
 |
PC BOARD | | D7054-69004 | HP LXr8500 Processor Carrier Board – Has Four Processor Slots – Two Boards are Used – Mounts to Processor Baseboard |
 |
PC BOARD | | D7054-69007 | HP LXr8500 NetServer Cache Coherency Filter – One needed for each Processor Carrier Board – Mounts to Processor Baseboard |
 |
PC BOARD | | D8540-69001 | HP LXr8500 Processor Baseboard – Mounts Horizontally in the Front Half of the Chassis |
 |
PC BOARD | | D6021-60002 | HP LXr8500 NetServer Front Panel Control Board with LCD Display Assembly |
 |
INTERFACE | | P3475-69003 | NetRaid-2M dual-channel disk array controller W/128MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors |
 |
INTERFACE | | D2140-69004 | NetRAID-1Si One-Channel Disk Array Controller – PCI Board with One Internal 68 Pin High Density and One External 68 Pin Ultra High Density SCSI Connector (P/O D2140A) |
 |
INTERFACE | | D4992-69001 | NetRAID-1 One-Channel Disk Array Controller – PCI Board With One Internal 68 Pin High Density and One External 68 Pin High Density Ultra Wide SCSI Connector (D4992A) |
 |
INTERFACE | | D5013A | PCI 10Base-T/100Base-TX LAN board – LAN Adapter – PCI 10/100TX LAN Board for NetServer |
 |
INTERFACE | | D5013B | PCI 10Base-T/100Base-TX LAN board – LAN Adapter – PCI 10/100TX LAN Board for NetServer |
 |
INTERFACE | | D5025-63001 | Wide SCSI Host Adapter Board (D5025A) – Installed in PCI Socket on System Backplane Board |
 |
INTERFACE | | D5025A | PCI Wide SCSI host adapter board – Wide SCSI Host Adapter Board – Installed in PCI Socket on System Backplane Board – May Need Cables D5968A and D6001A |
 |
INTERFACE | | D5955A | NetRAID-3si three-channel disk array controller – PCI board with three internal 68 pin high density and three external 68 pin high density Ultra wide SCSI connectors |
 |
INTERFACE | | D9161-69004 | NetRaid-4M four-channel disk array controller W/64MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors |
 |
INTERFACE | | D9161A | NetRAID-4M Four-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors |
 |
INTERFACE | | D9351-69004 | NetRaid-4M four-channel disk array controller W/128MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors |
 |
INTERFACE | | D9351A | NetRAID-4M Four-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors |
 |
INTERFACE | | P3410-69003 | NetRaid-1M single-channel Ultra3 SCSI disk array controller W/32MB cache – PCI board with one internal 68-pin High Density and one external 68-pin Very High Density Ultra3 SCSI connector |
 |
INTERFACE | | P3410A | NetRAID-1M Single-Channel Disk Array Controller W/32MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors |
 |
INTERFACE | | P3411-69004 | NetRaid-2M dual-channel disk array controller W/64MB cache – PCI board with two internal 68-pin High Density and two external 68-pin Very High Density Ultra3 SCSI connectors |
 |
INTERFACE | | P3411A | NetRAID-2M Dual-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors |
 |
INTERFACE | | P3413-63001 | Ultra160 LVD SCSI adapter board (Adaptec ASC-29160) – 64-bit, 66MHz PCI – External 68-pin High Density LVD connector, internal 68-pin Ultra160 LVD connector, internal 68-pin SE connector, internal 50-pin Narrow SE connector |
 |
INTERFACE | | P3413A | Ultra 160 LVD SCSI adapter board (Adaptec ASC-29160) – 64 bit, 66MHz PCI – External 68 pin high density LVD connector, internal 68 pin Ultra 160 LVD connector, internal 68 pin single-ended connector, internal 50 pin narrow single-ended connector |
 |
INTERFACE | | P3475A | NetRAID-2M Dual-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors |
 |
INTERFACE | | P3482A | Gigabit LAN adapter – PCI-X 10/100/1000TX 3Com LAN card – (3Com 3C996-T) |
 |
INTERFACE | | D5013-63003 | LAN adapter – PCI 10/100Base-TX LAN board – LAN Adapter – PCI 10/100TX LAN Board for NetServer (D5013A) |
 |
POWER SUPPLY | | D6021-69070 | Redundant hot swap power supply (Rev B) – 200/240VAC input, 750 watts – Located in the lower back of chassis |
 |
PROCESSOR | | D8531-69001 | Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 2MB Level-2 cache, Slot 2) for LXr8500 PIII/550 |
 |
PROCESSOR | | D9417-69000 | Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 512KB Level-2 cache, Slot 2) for HP LXr8500 PIII/550 |
 |
PROCESSOR | | D9418-69000 | Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 1MB Level-2 cache, Slot 2) for HP LXr8500 PIII/550 |
 |
PROCESSOR | | D9418A | Intel Pentium III Xeon processor upgrade – Includes one 550MHz (Tanner, 1MB Level-2 cache, Slot 2) processor for HP LXr8500 PIII/550 |
 |
PROCESSOR | | P1734-69000 | Intel Pentium III Xeon processor – 700MHz (1MB Level-2 cache, slot 2) for HP LXr8500 PIII/700 |
 |
PROCESSOR | | P1734A | Intel Pentium III Xeon processor upgrade – Includes one 700MHz (1MB Level-2 cache, Slot 2) processor for LXr8500 PIII/700 NetServer |
 |
PROCESSOR | | P1763-69000 | Intel Pentium III Xeon processor – 700MHz (2MB Level-2 cache, slot 2) for LXr8500 PIII/700 |
 |
PROCESSOR | | P1763A | Intel Pentium III Xeon processor upgrade – Includes one 700MHz (2MB Level-2 cache, Slot 2) processor for LXr8500 PIII/700 |
 |
PROCESSOR | | P3458-69001 | Intel Pentium III Xeon processor – 900MHz (2MB L2 cache, slot 2) for HP LXr8500 PIII/900 NetServer |
 |
PROCESSOR | | P3458A | Intel Pentium III Xeon processor upgrade – Includes one 900MHz (2MB L2 cache, slot 2) processor for LXr8500 PIII/900 NetServer |
 |