PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (USA)

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 10.0m (33ft) long

Cable kit C72 – Terminated Single-Ended SCSI cable which connects a controller to one or two non hot-swap internal drives along with installation instructions – Three high density 68-pin (M) connectors – 0.9m (2.8ft) long

SCSI interface cable with thumbscrews on both ends – Has 68-pin high density (M) connectors – 20.0m (65.6ft) long – (C7532A)

IDE drive ribbon cable marked ‘D7’ – 40-pin (F) connector marked ‘To system board’ to 40-pin (F) connector ‘To IDE device’ – 37.3cm (14.7in) long – Cable D7 – From backplane board to IDE CD-ROM drive

Floppy drive ribbon cable – 34-pin (F) connector marked ‘to system backplane’ and a 34-pin (F) connector marked ‘to 3.5 inch flexible disk drive’ – 61cm (24in) long – Cable F7

Mass storage power cable (P3) – 22-pin (F) connector marked ‘P1’ to three cable assemblies with a 14-pin (F) connector marked ‘P2’ and four unmarked 4-pin (F) connectors – The longest cable is 50.8cm (20in) long – From backplane board to secondary hot-swa

SCSI cable with twisted pair segments (C65) – Cable is marked ‘Int SCSI cable C65’ – One 68-pin (M) connector marked ‘To iO board’ and one 68-pin (M) connector marked ‘To SCSI mass storage device’ – 29.2cm (11.5in) long

SCSI cable with twisted pair segments (C62) – Cable is marked ‘Int SCSI cable C62’ – One 68-pin (M) connector marked ‘To iO board’ to one 68-pin (M) connector marked ‘To SCSI mass storage device’ – 55.2cm (21.8in) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 128 Ohms – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 10m (33ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 20.0m (66ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 1.5m (4.9ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

Low Voltage Differential/Ultra2 Single-Ended SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 128 Ohms – 10.0m (33ft) long

SCSI interface cable – Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends – 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

Ribbon cable kit (C73) – Self-adhesive cable clamp and cable marked ‘External SCSI cable C73’ – 68-pin (M) connector marked ‘to Motherboard or PCI board’ to high density 68-pin (F) connector with latch clips for rear panel – 64cm (25in) long – From SCSI ‘

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 0.9m (3.0ft) long

SCSI interface cable with thumbscrews on both ends – Has 68 pin high density (M) connectors – 20.0m (65.6ft) long

Front panel assembly bezel – Mounts over the control panel

Main bezel (rack mount version) – Covers the front of the NetServer – Includes mounting hardware and latch

Main bezel (pedestal version) – Covers the front of the server

Main bezel (rack mount version) – Low profile – Covers the front of the server

Dual fan assembly – Includes two fans mounted on a slide-in bracket – Installed in slot near the power supply

Tubeaxial fan – For the CPU board – Mounts on the rear of the chassis (Two used)

Processor fan and bracket assembly – Mounts on the side of the processor bracket

Dual fan assembly – Includes two fans mounted on a bracket/accessory board guide – Mounts near the I/O board

NetServer LH3/LH4 pedestal to rack conversion kit – Includes slide rails, bezels, and accessories

HP systems storage/6 rack kit, 11 EIA (Quartz Gray) – Mount one or two systems side by side – Has two sliding shelves, solid base, bezel, rail spacers for Rack System/E and /U – (D3604A/B)

Universal monitor rack mount kit – For any monitor up to 19-inch and 100 pounds – Quartz Gray

Universal monitor rack mount kit (Quartz Gray) – For any monitor up to 19-inch (max height 46cm (18.1-inches)) and 100 pounds

External mass storage rack mount kit (Quartz Gray) – Mount one or two systems side by side – Has two sliding shelves, solid base, and bezel – (D3604A/B)

4-port Console Switch – Connect up to four computers to a single monitor, keyboard, and mouse – Includes rack mounting hardware – Must order connecting cables separately

8-port Console Switch – Connect up to eight computers to a single monitor, keyboard, and mouse – Includes rack mounting hardware – Must order connecting cables separately

4-port Console Switch (Quartz Gray) – Connect up to four computers to a single monitor, keyboard, and mouse – Includes hardware, user manual, and power cable

8-port Console Switch (Quartz Gray) – Connect up to eight computers to a single monitor, keyboard, and mouse – Includes hardware, user manual, and power cable

Latch clip – Latch clip – Catches the arm from the cover locking latch – Mounts on the front of the chassis

Heat sink clip – Heat sink clip for Pentium II module – Two used

Cover – Installed over the system board side of the chassis

Cover – Large cover installed on both sides of a pedestal version or top and bottom of a rack mount version

Cover – Installed over the I/O board side of the cabinet

Front panel assembly – Includes power button, reset button, keyboard lock, LCD display, status LED’s

PS/2 two-button serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-DIN connector – (Part of C3751B)

2 button PS/2 serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-din connector

2 button PS/2 serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-din connector

NetServer Storage System/6 – External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules – Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s

NetServer Rack Storage System/8 – Rack mounted cabinet which can hold up to eight hot-swap drive modules – Includes rack optimized storage cabinet (3U high) with eight hot pluggable bays, dual SCSI backplane, redundant hot swap power supply, and fans

NetServer Storage System/6 – External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules – Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s

SureStore 7448w 48 slot DLT library with multiple Wide Differential SCSI buses – Includes four DLT 7000 drives

4/8GB SureStore DAT 8i Single-Ended Narrow SCSI-2 DAT tape drive

4/8GB external SureStore DAT 8e Single-Ended Narrow SCSI-2 DAT tape drive

12/24GB SureStore DAT 24i Single-Ended Narrow SCSI-2 DAT drive

12/24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DAT tape drive

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive

20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive

20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive

SureStore 4115we 15 slot DLT library – Includes one Fast Wide SCSI DLT 4000 drive, cosmetic panels, three magazines, barcode reader, and accessories

SureStore 7115WE 15 slot DLT library – Includes one Fast Wide SCSI DLT 7000 drive, cosmetic panels, three magazines, barcode reader, and accessories

SureStore 4215WE 15 slot DLT library – Includes two Fast Wide SCSI DLT 4000 drives, cosmetic panels, three magazines, barcode reader, and accessories

SureStore 7215we 15 slot DLT library – Includes two Fast Wide SCSI DLT 7000 drives, cosmetic panels, three magazines, barcode reader, and accessories

SureStore 4228w 28 slot DLT library with multiple Wide Differential SCSI buses – Includes two DLT 4000 drives

SureStore 7228w 28 slot DLT library with multiple Wide Differential SCSI buses – Includes two DLT 7000 drives

SureStore 4448w 48 slot DLT library with multiple Wide Differential SCSI buses – Includes four DLT 4000 drives

20/40GB SureStore DLT 40i Single-Ended Narrow SCSI-2 internal DLT drive

70GB SureStore DLT 70e Single-Ended Wide SCSI-2 external DLT drive

6×12/24GB SureStore DAT 24×6i Single-Ended Narrow SCSI-2 internal autoloader DDS-3 (DAT) tape drive

80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive

80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive

SureStore 418 8 slot DLT autoloader – Includes one Ultra SCSI DLT 4000 drive, six cartridge magazines, SCSI cable and terminator, and five data cartridges

1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height – (Part of D2035A/B)

IDE CD-ROM drive – 48X CD-ROM read (Mitsumi CRMC-FX4820T) – Has front panel headphone jack and volume control

9.1GB Ultra Wide SCSI hard drive module – 7,200 RPM

4.2GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM ²

9.1GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6106A)

9.1GB hot-swap Ultra2 SCSI hard drive module – 10,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6107A)

18.2GB hot-swap Ultra-2 SCSI hard drive module – 7,200 RPM, half height – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6108A)

18.2GB hot-swap Ultra-2 SCSI hard drive module – 10,000 RPM, half height

9.1GB Ultra Wide SCSI hard drive module – 10,000 RPM

18GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D7174A)

18.2GB Wide Single-Ended SCSI hard drive – 7,200 RPM

36.4GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer – (D9419A)

18.2GB hot-swap Ultra3 SCSI hard drive module – 15,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D9421A)

18.2GB ‘hot swap’ Ultra3 SCSI hard drive module – 10000 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer

18.2GB Ultra3 Wide SCSI LVD hard drive module – 10,000 RPM, 3.5-inch form factor, 1.0-inch high (Seagate ST318404LW)

9.1GB hot-swap Ultra3 SCSI hard drive module – 10,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1168A)

36.4GB Ultra3 Wide SCSI LVD hard drive module – 10,000 RPM (Seagate ST336704LW)

9GB Ultra3 SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high

18GB Ultra3 SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high – Comes mounted on a drive tray

18.2GB hot-swap Ultra3 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1216A)

9.1GB hot-swap Ultra3 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1217A)

73.4GB hot-swap Ultra3 SCSI hard drive module – 10,000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer

4.2GB Ultra Wide SCSI hard drive – 7,200 RPM

18.2GB hot-swap Ultra2 SCSI hard drive module – 10,000 RPM – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D7175A)

9GB Ultra3 SCSI hard drive module – 10000 RPM, 3.5in form factor, low profile 9GB Ultra3 SCSI hard drive module – 10000 RPM, 3.5in form factor, low profile

HP LH3 NetServer Terminator Board – Installed in a Processor Socket When the Processor is Not Installed

HP LH3 NetServer System (Mother) Board – with Super VGA, IDE, Dual Ultra2 SCSI Controller, Ultra2 to Single-Ended SCSI Converter – One of the Large Boards in Center of Chassis

HP LH3 I/O Board – Contains ISA and PCI Accessory Slots – One of the Large Boards in Center of Chassis

HP LH3 NetServer Power management and backplane PC board

NetRAID-1Si One-Channel Disk Array Controller – PCI Board with One Internal 68 Pin High Density and One External 68 Pin Ultra High Density SCSI Connector (P/O D2140A)

NetRAID-1 One-Channel Disk Array Controller – PCI Board With One Internal 68 Pin High Density and One External 68 Pin High Density Ultra Wide SCSI Connector (D4992A)

LAN Adapter – PCI 10/100TX LAN Board for NetServer (D5013A)

NetRAID-3Si Three-Channel Disk Array Controller – PCI Board With Three Internal 68 Pin High Density and Three External 68 Pin High Density Ultra Wide SCSI Connectors (D5955A)

Fiber channel array – Redundant module with two fiber channel ports and two very high density 68-pin SCSI connectors

32-bit PCI LAN interface board – RJ-45 connectors – Supports both EtherTwist 10Base-T and 100VG/802.12 – (J2585B, part of J3009B, part of of J3010B)

Power supply module – 300 watts

Power supply cage kit – Includes power supply cage, power supply module, hot swap fan tray

Redundant power supply module – May require a second power supply cage

Intel Pentium III processor upgrade – Includes one 500MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, ECC) processor

Intel Pentium II processor – 350MHz (Deschutes, 100MHz front side bus, 512KB Level-2 cache, Slot 1)

Intel Pentium II processor upgrade – Includes one 350MHz (Deschutes, 512KB Level-2 cache, Slot 1) processor

Intel Pentium II processor upgrade – Includes one 400MHz (Deschutes, 512KB Level-2 cache, Slot 1) processor

Intel Pentium II processor upgrade – Includes one 450MHz (Deschutes, 512KB Level-2 cache, Slot 1) processor

Intel Pentium III processor – 500MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, Slot 1) – Includes heat sink

Intel Pentium III processor – 500MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, Slot 1) – Includes heat sink

Intel Pentium III processor – 550MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, Slot 1) – Includes heat sink – (Requires processor fan accessory, D8595A)

Intel Pentium III processor – 550MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, Slot 1) – Includes heat sink – (Requires processor fan accessory, D8595A)

Intel Pentium III processor – 600MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, Slot 1) – Requires processor fan accessory (D8595A)

Intel Pentium III processor – 600MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, Slot 1) – Requires processor fan accessory (D8595A)