PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (USA)

‘Windows’ keyboard assembly (Quartz Gray, 105 key) – Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ABF, European-French) – Replacement for the C1405B, C1405C, and D4950B Keyboards

Cable kit C72 – Terminated Single-Ended SCSI cable which connects a controller to one or two non hot-swap internal drives along with installation instructions – Three high density 68-pin (M) connectors – 0.9m (2.8ft) long

Floppy drive ribbon cable – 34-pin (F) connector marked ‘to system backplane’ and a 34-pin (F) connector marked ‘to 3.5 inch flexible disk drive’ – 61cm (24in) long – Cable F7

Ribbon cable kit (C73) – Self-adhesive cable clamp and cable marked ‘External SCSI cable C73’ – 68-pin (M) connector marked ‘to Motherboard or PCI board’ to high density 68-pin (F) connector with latch clips for rear panel – 64cm (25in) long – From SCSI ‘

SCSI cable with twisted pair segments (C65) – Cable is marked ‘Int SCSI cable C65’ – One 68-pin (M) connector marked ‘To iO board’ and one 68-pin (M) connector marked ‘To SCSI mass storage device’ – 29.2cm (11.5in) long

SCSI cable with twisted pair segments (C62) – Cable is marked ‘Int SCSI cable C62’ – One 68-pin (M) connector marked ‘To iO board’ to one 68-pin (M) connector marked ‘To SCSI mass storage device’ – 55.2cm (21.8in) long

IDE drive ribbon cable marked ‘D7’ – 40-pin (F) connector marked ‘To system board’ to 40-pin (F) connector ‘To IDE device’ – 37.3cm (14.7in) long – Cable D7 – From backplane board to IDE CD-ROM drive

Cable kit – Two internal SCSI cables and one adapter – Used with HP NetRAID-3si disk array controller

Main bezel (rack mount version) – Covers the front of the NetServer – Includes mounting hardware and latch

Main bezel (pedestal version) – Covers the front of the server

Front panel assembly bezel – Mounts over the control panel

Tubeaxial fan – For the CPU board – Mounts on the rear of the chassis (Two used)

Dual fan assembly – Includes two fans mounted on a bracket/accessory board guide – Mounts near the I/O board

Dual fan assembly – Includes two fans mounted on a slide-in bracket – Installed in slot near the power supply

Fan assembly – Includes two tubeaxial fans mounted on a bracket – For the processor – Mounts on right side of system board support

External mass storage rack mount kit (Quartz Gray) – Mount one or two systems side by side – Has two sliding shelves, solid base, and bezel – (D3604A/B)

HP systems storage/6 rack kit, 11 EIA (Quartz Gray) – Mount one or two systems side by side – Has two sliding shelves, solid base, bezel, rail spacers for Rack System/E and /U – (D3604A/B)

Universal monitor rack mount kit (Quartz Gray) – For any monitor up to 19-inch (max height 46cm (18.1-inches)) and 100 pounds

NetServer LH3/LH4 pedestal to rack conversion kit – Includes slide rails, bezels, and accessories

Universal monitor rack mount kit – For any monitor up to 19-inch and 100 pounds – Quartz Gray

4-port Console Switch – Connect up to four computers to a single monitor, keyboard, and mouse – Includes rack mounting hardware – Must order connecting cables separately

8-port Console Switch – Connect up to eight computers to a single monitor, keyboard, and mouse – Includes rack mounting hardware – Must order connecting cables separately

4-port Console Switch (Quartz Gray) – Connect up to four computers to a single monitor, keyboard, and mouse – Includes hardware, user manual, and power cable

8-port Console Switch (Quartz Gray) – Connect up to eight computers to a single monitor, keyboard, and mouse – Includes hardware, user manual, and power cable

Heat sink clip – Heat sink clip for Pentium II module – Two used

Cover – Installed over the system board side of the chassis

Cover – Large cover installed on both sides of a pedestal version or top and bottom of a rack mount version

Cover – Installed over the I/O board side of the cabinet

Front panel assembly – Includes power button, reset button, keyboard lock, LCD display, status LED’s

PS/2 two-button serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-DIN connector – (Part of C3751B)

2 button PS/2 serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-din connector

NetServer Storage System/6 – External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules – Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s

NetServer Storage System/6 – External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules – Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s

NetServer Rack Storage System/8 – Rack mounted cabinet which can hold up to eight hot-swap drive modules – Includes rack optimized storage cabinet (3U high) with eight hot pluggable bays, dual SCSI backplane, redundant hot swap power supply, and fans

SureStore 4448w 48 slot DLT library with multiple Wide Differential SCSI buses – Includes four DLT 4000 drives

4/8GB SureStore DAT 8i Single-Ended Narrow SCSI-2 DAT tape drive

4/8GB external SureStore DAT 8e Single-Ended Narrow SCSI-2 DAT tape drive

12/24GB SureStore DAT 24i Single-Ended Narrow SCSI-2 DAT drive

12/24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DAT tape drive

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive

20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive

SureStore 4115we 15 slot DLT library – Includes one Fast Wide SCSI DLT 4000 drive, cosmetic panels, three magazines, barcode reader, and accessories

SureStore 7115WE 15 slot DLT library – Includes one Fast Wide SCSI DLT 7000 drive, cosmetic panels, three magazines, barcode reader, and accessories

SureStore 7215we 15 slot DLT library – Includes two Fast Wide SCSI DLT 7000 drives, cosmetic panels, three magazines, barcode reader, and accessories

SureStore 4228w 28 slot DLT library with multiple Wide Differential SCSI buses – Includes two DLT 4000 drives

SureStore 7448w 48 slot DLT library with multiple Wide Differential SCSI buses – Includes four DLT 7000 drives

20/40GB SureStore DLT 40i Single-Ended Narrow SCSI-2 internal DLT drive

70GB SureStore DLT 70e Single-Ended Wide SCSI-2 external DLT drive

6×12/24GB SureStore DAT 24×6i Single-Ended Narrow SCSI-2 internal autoloader DDS-3 (DAT) tape drive

80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive

SureStore 418 8 slot DLT autoloader – Includes one Ultra SCSI DLT 4000 drive, six cartridge magazines, SCSI cable and terminator, and five data cartridges

1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height – (Part of D2035A/B)

NetServer Storage System/6 – External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules – Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s

4.2GB Ultra Wide SCSI hard drive – 7,200 RPM

9.1GB Ultra Wide SCSI hard drive module – 7,200 RPM

4.2GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM

18.2GB hot-swap Ultra-2 SCSI hard drive module – 10,000 RPM, half height

18GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D7174A)

18.2GB hot-swap Ultra2 SCSI hard drive module – 10,000 RPM – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D7175A)

18.2GB Wide Single-Ended SCSI hard drive – 7,200 RPM

36.4GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer – (D9419A)

18.2GB Ultra3 Wide SCSI LVD hard drive module – 10,000 RPM, 3.5-inch form factor, 1.0-inch high (Seagate ST318404LW)

9.1GB hot-swap Ultra3 SCSI hard drive module – 10,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1168A)

36.4GB Ultra3 Wide SCSI LVD hard drive module – 10,000 RPM (Seagate ST336704LW)

9GB Ultra3 SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high

9GB Ultra3 SCSI hard drive module – 10000 RPM, 3.5in form factor, low profile

18GB Ultra3 SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high – Comes mounted on a drive tray

18.2GB hot-swap Ultra3 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1216A)

9.1GB hot-swap Ultra3 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1217A)

SureStore 7228w 28 slot DLT library with multiple Wide Differential SCSI buses – Includes two DLT 7000 drives

IDE CD-ROM drive – 48X CD-ROM read (Mitsumi CRMC-FX4820T) – Has front panel headphone jack and volume control

9.1GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6106A)

9.1GB hot-swap Ultra2 SCSI hard drive module – 10,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6107A)

18.2GB hot-swap Ultra-2 SCSI hard drive module – 7,200 RPM, half height – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6108A)

9.1GB Ultra Wide SCSI hard drive module – 10,000 RPM

18.2GB ‘hot swap’ Ultra3 SCSI hard drive module – 10000 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer

16MB, 50nS EDO (Extended Data Output) SIMM memory module – I/O memory

256MB memory upgrade kit – Includes four 64MB, 50nS, buffered ECC EDO DIMMs – For NetServer LXr8000 and LH4

256MB, 50nS EDO DIMM memory module – Part number is for one of four modules that come in the memory upgrade kit (part of D6114A)

1GB memory upgrade kit – Includes four 256MB, 50nS, buffered ECC EDO DIMMs – For NetServer LXr8000 and LH4

64MB SIMM memory module for NetRAID 3Si disk array controller – (D7132A)

32MB, 60nS, 72-bit EDO (Extended Data Output) DIMM memory module – (D4295A)

HP LH4/LH4r Power management and backplane PC board

64MB, 50nS EDO DIMM memory module – Part number is for one of four modules that come in the memory upgrade kit (part of D6112A)

HP LH4/LH4r NetServer System Processor Board – Supports up to Four Zeon Processors Integrated Dual Ultra-2 SCSI Controller With Additional SCSI-2 to SE Converter – Mounts in center of Chassis – for NetServer LH4 Serial Number SG00209150 and Higher

HP LH4/LH4r I/O Board – Contains ISA and PCI Accessory Slots – One of the Large Boards in Center of Chassis

HP LH4/LH4r Memory Board – Has Eight Slots for DIMMs – DIMMs Must be Installed in Pairs – Located on the System Processor Board Assembly, Two Memory Boards are Required

HP LH4/LH4r NetServer System Processor Board – Supports up to Four Zeon Processors Integrated Dual Ultra-2 SCSI Controller With Additional SCSI-2 to SE Converter – Mounts in center of Chassis

NetRAID-1Si One-Channel Disk Array Controller – PCI Board with One Internal 68 Pin High Density and One External 68 Pin Ultra High Density SCSI Connector (P/O D2140A)

NetRAID-1 One-Channel Disk Array Controller – PCI Board With One Internal 68 Pin High Density and One External 68 Pin High Density Ultra Wide SCSI Connector (D4992A)

NetRAID-1 One-Channel Disk Array Controller – PCI Board With One Internal 68 Pin High Density and One External 68 Pin High Density Ultra Wide SCSI Connector (D4992A)

LAN Adapter – PCI 10/100TX LAN Board for NetServer (D5013A)

LAN Adapter – PCI 10/100TX LAN Board for NetServer

LAN Adapter – PCI 10/100TX LAN Board for NetServer

NetRAID-3Si Three-Channel Disk Array Controller – PCI Board With Three Internal 68 Pin High Density and Three External 68 Pin High Density Ultra Wide SCSI Connectors (D5955A)

NetRAID-3si three-channel disk array controller – PCI board with three internal 68 pin high density and three external 68 pin high density Ultra wide SCSI connectors – NetRAID-3Si Disk Array Controller

TopTools remote control card with battery (Version 1) – Allows emergency remote access using LAN or modem

NetRaid-4M four-channel disk array controller W/64MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-4M Four-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

NetRaid-4M four-channel disk array controller W/128MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-4M Four-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

32-bit PCI LAN interface board – RJ-45 connectors – Supports both EtherTwist 10Base-T and 100VG/802.12 – (J2585B, part of J3009B, part of of J3010B)

32-bit PCI LAN interface board – RJ-45 connectors – Supports both EtherTwist 10Base-T and 100VG/802.12 – (J2585B, part of J3009B, part of of J3010B)

PCI 32-Bit LAN Interface Board – has RJ-45 Connector – Supports Both Ethertwist (10BASE-T) & 100VG/802.12 (J2585B, 1/6 of J3009B, 1/24 of J3010B)

TopTools remote control card with battery (Version 2.0) – Allows emergency remote access using LAN or modem

NetRaid-1M single-channel Ultra3 SCSI disk array controller W/32MB cache – PCI board with one internal 68-pin High Density and one external 68-pin Very High Density Ultra3 SCSI connector

NetRAID-1M Single-Channel Disk Array Controller W/32MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

NetRaid-2M dual-channel disk array controller W/64MB cache – PCI board with two internal 68-pin High Density and two external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-2M Dual-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connector

Ultra160 LVD SCSI adapter board (Adaptec ASC-29160) – 64-bit, 66MHz PCI – External 68-pin High Density LVD connector, internal 68-pin Ultra160 LVD connector, internal 68-pin SE connector, internal 50-pin Narrow SE connector

Ultra 160 LVD SCSI adapter board (Adaptec ASC-29160) – 64 bit, 66MHz PCI – External 68 pin high density LVD connector, internal 68 pin Ultra 160 LVD connector, internal 68 pin single-ended connector, internal 50 pin narrow single-ended connector

NetRaid-2M dual-channel disk array controller W/128MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-2M Dual-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

Gigabit LAN adapter – PCI-X 10/100/1000TX 3Com LAN card – (3Com 3C996-T)

NetRAID-1 one-channel disk array controller – PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector

NetRAID-1 one-channel disk array controller – PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector

NetRAID-3Si Three-Channel Disk Array Controller – PCI Board With Three Internal 68 Pin High Density and Three External 68 Pin High Density Ultra Wide SCSI Connectors (D5955A)

Power supply module – 300 watts

Redundant power supply module – May require a second power supply cage

Intel Pentium II Xeon processor upgrade – Includes one 450MHz (1MB Level-2 cache, Slot 2) processor – (For LH4 and LXr 8000)

Intel Pentium III Xeon processor upgrade – Includes one 550MHz (Tanner, 512KB Level-2 cache, Slot 2) processor

Intel Pentium III Xeon processor upgrade – Includes one 550MHz (Tanner, 2MB Level-2 cache, Slot 2) processor

Intel Pentium II Xeon processor upgrade – Includes one 400MHz (1MB Level-2 cache, Slot 2) processor – (For LH4 and LXr 8000)

Intel Pentium II Xeon processor – 450MHz (Drake, 100MHz front side bus, 512KB Level-2 cache, Slot 2) – Includes heat sink – For LH4 and LXr 8000 (Part of D7001A)

Intel Pentium II Xeon processor upgrade – Includes one 450MHz (512KB Level-2 cache, Slot 2) processor

Intel Pentium II Xeon processor upgrade – Includes one 400MHz (512KB Level-2 cache, Slot 2) processor – (For LH4 and LXr 8000)

Intel Pentium III Xeon processor upgrade – Includes one 500MHz (512KB Level-2 cache, Slot 2) processor

Intel Pentium III Xeon processor upgrade kit – Includes one 500MHz (1MB Level-2 cache, Slot 2) processor with heatsink and voltage regulator module

Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 1MB Level-2 cache, Slot 2) – Includes heat sink

Intel Pentium III Xeon processor upgrade – Includes one 550MHz (Tanner, 1MB Level-2 cache, Slot 2) processor

Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 2MB Level-2 cache, Slot 2) – Includes heat sink

Intel Pentium III Xeon processor – 700MHz (1MB Level-2 cache, slot 2)

Intel Pentium III Xeon processor upgrade – Includes one 700MHz (1MB Level-2 cache, Slot 2) processor

Intel Pentium II Xeon processor – 400MHz (Drake, 100MHz front side bus, 1MB Level-2 cache, Slot 2) – Includes heat sink – For LH4 and LXr 8000 (Part of D6119A)

Intel Pentium II Xeon processor upgrade – Includes one 450MHz (1MB Level-2 cache, Slot 2) processor – (For LH4 and LXr 8000)

Intel Pentium II Xeon processor – 400MHz (Drake, 100MHz front side bus, 512KB Level-2 cache, Slot 2) – Includes heat sink – For LH4 and LXr 8000 (Part of D7007A)

Intel Pentium III Xeon processor – 500MHz (Tanner, 100MHz front side bus, 512KB Level-2 cache, Slot 2) – Includes heat sink

Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 512KB Level-2 cache, Slot 2) – Includes heat sink