‘Windows’ keyboard assembly (Quartz Gray, 105 key) – Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ABF, European-French) – Replacement for the C1405B, C1405C, and D4950B Keyboards

PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (USA)

Ultra-3 twisted pair SCSI cable kit – Includes one 1.2m (4.0ft) terminated twisted pair SCSI cable with five connectors and one 1.1m (3.8ft) twisted pair SCSI cable with two connectors

IDE drive ribbon cable marked ‘D7’ – 40-pin (F) connector marked ‘To system board’ to 40-pin (F) connector ‘To IDE device’ – 37.3cm (14.7in) long – Cable D7 – From backplane board to IDE CD-ROM drive

Floppy drive ribbon cable – 34-pin (F) connector marked ‘to system backplane’ and a 34-pin (F) connector marked ‘to 3.5 inch flexible disk drive’ – 61cm (24in) long – Cable F7

Mass storage power cable (P3) – 22-pin (F) connector marked ‘P1’ to three cable assemblies with a 14-pin (F) connector marked ‘P2’ and four unmarked 4-pin (F) connectors – The longest cable is 50.8cm (20in) long – From backplane board to secondary hot-swa

SCSI cable with twisted pair segments (C65) – Cable is marked ‘Int SCSI cable C65’ – One 68-pin (M) connector marked ‘To iO board’ and one 68-pin (M) connector marked ‘To SCSI mass storage device’ – 29.2cm (11.5in) long

SCSI cable with twisted pair segments (C62) – Cable is marked ‘Int SCSI cable C62’ – One 68-pin (M) connector marked ‘To iO board’ to one 68-pin (M) connector marked ‘To SCSI mass storage device’ – 55.2cm (21.8in) long

SCSI interface cable – Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends – 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

Cable assembly – Has 14-pin (F) connectors – 9.8cm (3.9in) long – Hot-Swap cage power harness

Power supply cable assembly – A 22cm (8.7in) cable which has a 24-pin (M) connector and a 20-pin (F) connector connected using two wires to an 11cm (4.3in) cable which has a 24-pin (M) connector and a 24-pin (F) connector – From power management/interconn

Exhaust fan power cable

Ultra-3 twisted pair SCSI cable kit – Includes one 1.2m (4.0ft) terminated twisted pair SCSI cable with five connectors and one 1.1m (3.8ft) twisted pair SCSI cable with two connectors

Cable kit – Two internal SCSI cables and one adapter – Used with HP NetRAID-3si disk array controller

Ribbon cable assembly – Has 30-pin (F) connector to both a 7.8cm (3.1in) cable with DB-15 (F) connector and mounting hardware and a 16.5cm (6.5in) cable with DB-15 (F) connector and mounting hardware – From power management/interconnect board to power sup

Main bezel (rack mount version) – Low profile – Covers the front of the server

Main bezel (rack mount version) – Covers the front of the NetServer – Includes mounting hardware and latch

Front bezel – For pedestal configuration – Includes bezel lock

Main bezel (rack mount version) – Covers the front of the server

Front panel assembly bezel – Mounts over the control panel

Hot-swap fan assembly – For I/O boards and processor cooling – Mounts on the I/O board support in the middle of the chassis (Two used)

Fan assembly – Includes two hot-swap fans mounted on a bracket – For the power supply – Slides in slot in the middle of the chassis assembly (in front of the power supplies)

Hot-swap fan assembly – Exhaust Fan – Mounts on the rear of the chassis assembly (system processor board side)

NetServer LH3000/LH6000 pedestal to rack conversion kit – Includes slide rails, bezels, and accessories

Latch clip – Latch clip – Catches the arm from the cover locking latch – Mounts on the front of the chassis

Cover – Large cover installed on both sides of a pedestal version or top and bottom of a rack mount version

Cover – Installed over the I/O board side of the cabinet

Cover – Installed over the system board side of the chassis

5.25-inch filler panel (Quartz Gray) – For empty 5.25-inch drive bays above the Hot-Swap drive bay

PS/2 two-button serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-DIN connector – (Part of C3751B)

2 button PS/2 serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-din connector

SureStore H/A tape array 5500 – Rack mount enclosure for up to five DLT80m DLT drives – With rail kit, install guide, users manual, two power cables, and four 0.5m (1.6ft) long SCSI cables

SureStore H/A tape array 5500 – Rack mount enclosure for up to five DLT80m DLT drives – With rail kit, install guide, users manual, two power cables, and four 0.5m (1.6ft) long SCSI cables

24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive

HP SureStore Tape Rack Array – Includes rack mount enclosure for up to four removable drives, with rail kit, install guide, users manual, four power cables, two 2.5M (8.2ft) & one 0.9M (3.0ft) SCSI cable

NetServer Storage System/12 – External cabinet which can hold eight half height, or 12 low profile Ultra2 SCSI drives – Includes one Rack Storage 12 Ultra2 SCSI card

NetServer Rack Storage 12/FC – Fiber channel mass storage enclosure – Can hold 8 or 12 Ultra2 SCSI drives – Includes one copper fiber channel cable and one copper GBIC

NetServer Storage System/12 – External cabinet which can hold eight half height, or 12 low profile Ultra2 SCSI drives – Includes one Rack Storage 12 Ultra160 SCSI card

8GB SureStore DAT 8i Single-Ended Narrow SCSI-2 DDS-2 DAT tape drive

36.4GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer

9.1GB Ultra Wide SCSI hard drive module – 10,000 RPM

8GB external SureStore DAT 8e Single-Ended Narrow SCSI-2 DDS-2 DAT tape drive

24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive

20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive

20/40GB SureStore DLT 40i Single-Ended Narrow SCSI-2 internal DLT drive

20/40GB hot-swap SureStore DLT40r removable DLT drive – Includes manuals, software on a CD-ROM, DLT tape IV media, and cleaning cartridge

20/40GB SureStore DAT40X6e DDS-4 external autoloader tape drive

80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive

1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height – (Part of D2035A/B)

9.1GB Ultra Wide SCSI hard drive module – 7,200 RPM

9.1GB hot-swap Ultra2 SCSI hard drive module – 10,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6107A)

18GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D7174A)

18.2GB hot-swap Ultra2 SCSI hard drive module – 10,000 RPM – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D7175A)

36.4GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer – (D9419A)

18.2GB ‘hot swap’ Ultra3 SCSI hard drive module – 10000 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer

9GB Ultra3 SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high

9GB Ultra3 SCSI hard drive module – 10000 RPM, 3.5in form factor, low profile

18GB Ultra3 SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high – Comes mounted on a drive tray

18.2GB hot-swap Ultra3 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1216A)

9.1GB hot-swap Ultra3 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1217A)

73.4GB hot-swap Ultra3 SCSI hard drive module – 10,000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer

73.4GB hot-swap Ultra3 SCSI hard drive module – 10,000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer

24GB internal SureStore DAT 24i Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive (Flint)

6×12/24GB SureStore DAT 24×6i Single-Ended Narrow SCSI-2 internal autoloader DDS-3 (DAT) tape drive

20/40GB SureStore DAT40i internal DDS-4 tape drive

20/40GB SureStore DAT40e external DDS-4 tape drive

9.1GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6106A)

18.2GB Wide Single-Ended SCSI hard drive – 7,200 RPM

18.2GB hot-swap Ultra3 SCSI hard drive module – 15,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D9421A)

18.2GB Ultra3 Wide SCSI LVD hard drive module – 10,000 RPM, 3.5-inch form factor, 1.0-inch high (Seagate ST318404LW)

9.1GB hot-swap Ultra3 SCSI hard drive module – 10,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1168A)

36.4GB Ultra3 Wide SCSI LVD hard drive module – 10,000 RPM (Seagate ST336704LW)

64MB, 100MHz ECC SDRAM DIMM memory module – I/O Channel Memory – Mounts on the I/O board in the NetRAID memory slot

128MB, 100MHz ECC SDRAM DIMM memory module – I/O Channel Memory – Mounts on the I/O board in the NetRAID memory slot

512MB, 133MHz ECC SDRAM DIMM memory module – (D8267A) – for HP LH6000 NetServer

1GB, 133MHz ECC SDRAM DIMM memory module – (D8268A) – for HP LH6000 NetServer

64MB SIMM memory module for NetRAID 3Si disk array controller – (D7132A)

32MB, 100MHz non-ECC SDRAM DIMM memory module – I/O Channel Memory – Mounts on the I/O board in the NetRAID memory slot

128MB, 133MHz ECC SDRAM DIMM memory module – (D8265A) – for HP LH60000 NetServer

256MB, 133MHz ECC SDRAM DIMM memory module – (D8266A) – for HP LH6000 NetServer

HP LH6000 NetServer I/O Board – Contains four 64-bit PCI, two 64-bit and two 32-bit hot plug PCI accessory card slots -Includes extractor

HP LH6000 NetServer Power Management/Interconnect Board – Has connectors for the system processor board, I/O board, IDE drives, and system power connectors – Mounts flat in the center of the chassis

HP LH6000 Duplexing Backplane – Attaches to Hot Swap Bay Backplane to Split 6 Bay Hot Swap Cage into Two 3 Bay Units with Separate Connectors

HP LH6000 NetServer Duplexing Backplane – Attaches to Hot Swap Bay Backplane to Split 6 Bay Hot Swap Cage into Two 3 Bay Units with Separate Connectors

HP LH6000 System board – Has eight DIMM slots, integrated ATI Rage IIIC video controller with 2MB SGRAM, and a slot for the processor board

NetRAID-1Si One-Channel Disk Array Controller – PCI Board with One Internal 68 Pin High Density and One External 68 Pin Ultra High Density SCSI Connector (P/O D2140A)

NetRAID-1si – One-channel disk array controller – PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector

LAN Adapter – PCI 10/100TX LAN Board for NetServer

NetRAID-3si three-channel disk array controller – PCI board with three internal 68 pin high density and three external 68 pin high density Ultra wide SCSI connectors

Ultra3 SCSI host adapter

TopTools remote control card with battery (Version 1) – Allows emergency remote access using LAN or modem

Fiber channel host bus adapter – Controller PC board for fiber channel devices

Rack Storage/12 Fiber Channel Host Bus Adapter – Controller PC board for clustering fiber channel devices

NetRaid-4M four-channel disk array controller W/128MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-4M Four-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

NetRAID-1M Single-Channel Disk Array Controller W/32MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

NetRAID-2M Dual-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

NetRaid-2M dual-channel disk array controller W/128MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

LAN Adapter – PCI 10/100TX LAN Board for NetServer (D5013A)

Ultra2 SCSI host adapter

NetRaid-4M four-channel disk array controller W/64MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-4M Four-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

TopTools remote control card with battery (Version 2.0) – Allows emergency remote access using LAN or modem

NetRaid-1M single-channel Ultra3 SCSI disk array controller W/32MB cache – PCI board with one internal 68-pin High Density and one external 68-pin Very High Density Ultra3 SCSI connector

NetRaid-2M dual-channel disk array controller W/64MB cache – PCI board with two internal 68-pin High Density and two external 68-pin Very High Density Ultra3 SCSI connectors

Ultra160 LVD SCSI adapter board (Adaptec ASC-29160) – 64-bit, 66MHz PCI – External 68-pin High Density LVD connector, internal 68-pin Ultra160 LVD connector, internal 68-pin SE connector, internal 50-pin Narrow SE connector

Ultra 160 LVD SCSI adapter board (Adaptec ASC-29160) – 64 bit, 66MHz PCI – External 68 pin high density LVD connector, internal 68 pin Ultra 160 LVD connector, internal 68 pin single-ended connector, internal 50 pin narrow single-ended connector

NetRAID-2M Dual-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

Gigabit LAN adapter – PCI-X 10/100/1000TX 3Com LAN card – (3Com 3C996-T)

Power supply module – 300 watts

Redundant power supply – Includes a 410-watt power supply, power management board, and documentation

Redundant power supply module – 300 watts – Includes secondary fan tray – Plugs Into the power supply cage

Intel Pentium III Xeon processor upgrade – Includes one 700MHz (Cascades, 1MB Level-2 cache, Slot 2) processor

Intel Pentium III Xeon processor – 700MHz (Cascades, 100MHz front side bus, 2MB Level-2 cache, Slot 2)

Intel Pentium III Xeon processor upgrade – Includes one 700MHz (Cascades, 2MB Level-2 cache, Slot 2) processor

Intel Pentium III Xeon processor upgrade – Includes one 550MHz (Tanner, 512KB Level-2 cache, Slot 2) processor

Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 1MB Level-2 cache, Slot 2)

Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 2MB Level-2 cache, Slot 2)

Intel Pentium III Xeon processor upgrade – Includes one 550MHz (Tanner, 2MB Level-2 cache, Slot 2) processor

Intel Pentium III Xeon processor – 900MHz (2MB Level-2 cache, slot 2)

HP LH6000 NetServer Processor Board – Has three processor slots on each side of the board and six VRM slots on one side – Plugs into the system board

Intel Pentium III Xeon processor – 700MHz (Cascades, 100MHz front side bus, 1MB Level-2 cache, Slot 2)

Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 512KB Level-2 cache, Slot 2)

Intel Pentium III Xeon processor upgrade – Includes one 550MHz (Tanner, 1MB Level-2 cache, Slot 2) processor