Type | Image | Référence | Description | Cotation |
---|
KEYBOARD | | 435302-001 | PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (USA) |
|
KEYBOARD | | C4739-60105 | ‘Windows’ keyboard assembly (Quartz Gray, 105 key) – Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ABF, European-French) – Replacement for the C1405B, C1405C, and D4950B Keyboards |
|
CABLE | | 5063-1214 | SCSI interface cable – 50-pin low density (M) bail lock to 68-pin high density (M) thumbscrew – 1.0m (3.3ft) long – (C2915A) |
|
CABLE | | 5063-1269 | SCSI interface cable – 50-pin low density (M) bail lock to 68-pin high density (M) thumbscrew – 2.0m (6.6ft) long – (A3401A Option 002) |
|
CABLE | | 413290-001 | SCSI interface cable with thumbscrews on ends – 68 pin high density (M) to 68 pin high density (M) – 0.5m (1.6ft) long |
|
CABLE | | 413291-001 | Low Voltage Differential SCSI (LVDS) interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M), 90 ohms , 1.0m (3.3ft) long |
|
CABLE | | 413292-001 | SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long |
|
CABLE | | 5062-3383 | SCSI interface cable – 50-pin high density (M) thumbscrew to 50-pin low density (M) bail lock – 1.0m (3.3ft) long |
|
CABLE | | 5182-6747 | SCSI ribbon cable (C14) – Fast Wide (Ultra) cable marked ‘Int. SCSI bridge cable C14-90 ohm’ – 68-pin (M) connector marked ‘Top’ to 68-pin (M) connector marked ‘Bottom’ – 23.6cm (9.3in) long – Between the two hot-swap backplane boards (configuration depen |
|
CABLE | | 5182-6749 | Fast Wide SCSI ribbon cable (C23) – Cable marked ‘External SCSI port cable C23-90 ohm’ – 68-pin (M) connector marked ‘To system board’ to high density 68-pin (F) connector with latch clips for the rear panel – 51.8cm (20.4in) long – From one of the proces |
|
CABLE | | 5182-6788 | Ribbon cable for one IDE drive – 40-pin (F) connector to 40-pin (F) connector – 51cm (20in) long |
|
CABLE | | 5182-6789 | Floppy drive ribbon cable – 34-pin (F) connector marked ‘to system board’ to a 34-pin (F) old-style edge connector and a 34-pin (F) new-style connector marked ‘to 3.5 inch flexible disk drive’ – 61.9cm (24.4in) long |
|
CABLE | | 5182-9413 | Fast Narrow SCSI-2 90 ohm ribbon cable with termination (C21) – Has a 50-pin (F) connector marked ‘To array back plane’ and two 50-pin (F) connector marked ‘To unterminated SCSI device’ – 47cm (18.5in) long – From CD-ROM and/or other Narrow SCSI-2 drive t |
|
CABLE | | C2911A | SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 0.9m (3.0ft) long |
|
CABLE | | C2911C | SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 128 Ohms – 1.0m (3.3ft) long |
|
CABLE | | C2915A | SCSI interface cable – 50 pin low density (M) bail locks to 68 pin high density (M) thumbscrews – 1.0m (3.3ft) long |
|
CABLE | | C2924A | SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long |
|
CABLE | | C2924C | SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 128 Ohms – 2.5m (8.2ft) long |
|
CABLE | | C2978B | SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 128 Ohms – 0.5m (1.6ft) long |
|
CABLE | | C2979B | SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 128 Ohms – 1.5m (4.9ft) long |
|
CABLE | | C2981A | SCSI interface cable with thumbscrews on both ends – Ultra flexible 68 pin high density (M) to 68 pin high density (M) – 0.5m (1.6ft) long |
|
CABLE | | C3726A | SCSI interface cable with thumbscrews on both ends – 68-pin ultra high density (M) to 68-pin high density (M) – 1.0m (3.3ft) long |
|
CABLE | | C5666A | SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 0.9m (3.0ft) long |
|
CABLE | | C5667A | SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 1.5m (4.9ft) long |
|
CABLE | | C5699A | SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long |
|
CABLE | | C5743A | Low Voltage Differential/Ultra2 Single-Ended SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long |
|
CABLE | | D3636A | SCSI interface cable with thumbscrews on both ends – Highly flexible 68 pin high density (M) to 68 pin high density (M) – 2.5m (8.2ft) long |
|
CABLE | | D3636B | SCSI interface cable with thumbscrews on both ends – Highly flexible 68 pin high density (M) to 68 pin high density (M) – 2.5m (8.2ft) long |
|
CABLE | | D3636C | SCSI interface cable with thumbscrews on both ends – Highly flexible 68-pin high density (M) to 68-pin high density (M) – 90 Ohms – 2.5m (8.2ft) long |
|
CABLE | | D3637A | SCSI interface cable with thumbscrews on both ends – Highly flexible 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long |
|
CABLE | | D3637B | SCSI interface cable with thumbscrews on both ends – Highly flexible 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long |
|
CABLE | | D4845A | SCSI cable kit – Used to reconfigure the mass storage interfaces – Kit includes: hot swap backplane cable (C14), Fast/Wide port cable (C22), and 50-pin to 68-pin adapter (A) |
|
CABLE | | D4983B | NetRAID controller to Rack Storage/8 cable kit – Includes a 68-pin cable from third channel of D4943A controller to rear panel and a 2.5m (8.2ft) 68-pin high density cable with thumbscrews |
|
CABLE | | D6020A | SCSI interface cable – Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends – 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long |
|
CABLE | | K2285-60001 | SCSI interface cable – 50-pin low density (M) bail lock to 50-pin high density (M) latch/clip – 1.5m (4.9ft) long – (K2285) |
|
CABLE | | K2286 | SCSI interface cable – 50-pin low density (M) bail lock to 50-pin high density (M) latch/clip – 1.0m (3.3ft) long |
|
CABLE | | K2286-60001 | SCSI interface cable – 50-pin low density (M) bail lock to 50-pin high density (M) latch/clip – 1.0m (3.3ft) long – (K2286) |
|
CABLE | | 5182-4535 | Ribbon cable assembly – 3-pin (F) connector to 3-pin (F) connector – 30cm (11.8in) long – I2C bus cable assembly (cable B1) – From hot-swap backplane boards to system (mother) board (two used) |
|
CABLE | | 5182-6746 | Fast Wide SCSI ribbon cable – Cable is marked ‘Internal SCSI cable C22-90 ohm’ – Has one 68-pin (M) connector marked ‘To motherboard or PCI board’ and one 68-pin (M) connector marked ‘To SCSI mass storage device’ – 76.7cm (30.2in) long – Cable C22 – From |
|
CABLE | | C2978A | SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 90 Ohms – 0.5m (1.6ft) long |
|
CABLE | | C2979A | SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 90 Ohms – 1.5m (4.9ft) long |
|
BEZEL | | 5063-8380 | Bezel assembly – Has cut outs for switches and LED activity lights – Plastic cover over the control panel PC board |
|
BEZEL | | 5063-8390 | ‘Hot swap’ bezel assembly (Flint Gray) – Frame around six ‘hot swap’ drives – Includes the lock |
|
BEZEL | | 5064-0715 | Hard drive tray bezel (Flint Gray) – For 3.5-inch hard drives |
|
FAN | | 5064-0701 | Fan assembly – With housing – Mounts to the rear panel in the upper slot (when second power supply has not been added) |
|
FAN | | 5064-0725 | Tubeaxial fan – Mounts to the front panel (Two used) |
|
RACK MOUNT KIT | | J1454A | External mass storage rack mount kit – D3604A/B Storage System/6 rack mount kit – Mount one or two systems side by side – Has two sliding shelves, solid base, and bezel – (Parchment White) |
|
RACK MOUNT KIT | | J1491A | NetServer LD/LH/LS series rack mount kit – Includes rails, solid base, front bezel, and cable management brackets – Quartz Gray |
|
RACK MOUNT KIT | | J1491B | NetServer LD/LH/LS series rack mount kit – Includes rails, base on heavy duty slides, front bezel, set of spacers for Rack System/E and /U, and cable management brackets – (Quartz Gray) |
|
RACK MOUNT KIT | | J1492A | External mass storage rack mount kit (Quartz Gray) – Mount one or two systems side by side – Has two sliding shelves, solid base, and bezel – (D3604A/B) |
|
RACK MOUNT KIT | | J1492B | HP systems storage/6 rack kit, 11 EIA (Quartz Gray) – Mount one or two systems side by side – Has two sliding shelves, solid base, bezel, rail spacers for Rack System/E and /U – (D3604A/B) |
|
SWITCH | | J1460A | 8-port Console Switch (Parchment White) – Connect up to eight computers to a single monitor, keyboard, and mouse – Desktop or rack mountable |
|
SWITCH | | J1473A | 4-port Console Switch – Connect up to four computers to a single monitor, keyboard, and mouse – Includes rack mounting hardware – Must order connecting cables separately |
|
SWITCH | | J1474A | 8-port Console Switch – Connect up to eight computers to a single monitor, keyboard, and mouse – Includes rack mounting hardware – Must order connecting cables separately |
|
SWITCH | | J1493A | 4-port Console Switch (Quartz Gray) – Connect up to four computers to a single monitor, keyboard, and mouse – Includes hardware, user manual, and power cable |
|
SWITCH | | J1497A | 8-port Console Switch (Quartz Gray) – Connect up to eight computers to a single monitor, keyboard, and mouse – Includes hardware, user manual, and power cable |
|
SWITCH | | J3177A | AdvanceStack Switch 224 (Quartz Gray) – Has 24 RJ-45 connectors (10Base-T ports), one fixed 100Base-TX ‘fat pipe’, one 100Base-TX or -FX transceiver bay, and one management module slot |
|
SWITCH | | J3175A | AdvanceStack Switch 208T (Quartz Gray) – High performance LAN switch with eight 10Base-T ports, one 100Base-T port, and one open transceiver slot for 100Base-T or 100Base-FX |
|
ADAPTER | | 5182-4550 | SCSI adapter (68-pin (F) to 50-pin (M)) – Used in some configurations for the CD-ROM drive and/or another Single-Ended SCSI drive (Narrow 8-bit to Fast Wide 16-bit) – (Cable A) |
|
CLIP | | 5183-2472 | Heat sink clip – Heat sink clip for Pentium II module – Two used |
|
COVER | | 5063-8378 | Chassis cover – Includes front, top and both sides |
|
COVER | | 5064-1913 | Locking cover (Flint Gray) – Attaches to the front of the ‘Hot Swap’ drive trays |
|
PANEL | | 5063-8389 | 5.25-inch filler panel (Quartz Gray) – For empty 5.25-inch drive bays above the Hot-Swap drive bay |
|
PANEL | | 5063-8391 | Hot Swap drive filler panel (Flint Gray) – For empty Hot-Swap drive slots |
|
MOUSE | | C3751-60201 | PS/2 two-button serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-DIN connector – (Part of C3751B) |
|
MOUSE | | C3751B | 2 button PS/2 serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-din connector |
|
STORAGE SYSTEM | | D3604B | NetServer Storage System/6 – External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules – Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s |
|
STORAGE SYSTEM | | D3604BR | NetServer Storage System/6 – External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules – Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s |
|
STORAGE SYSTEM | | D4902A | NetServer Rack Storage System/8 – Rack mounted cabinet which can hold up to eight hot-swap drive modules – Includes rack optimized storage cabinet (3U high) with eight hot pluggable bays, dual SCSI backplane, redundant hot swap power supply, and fans |
|
DRIVE | | 5064-7985 | SCSI-2 CD-ROM drive (Flint Gray) – 32X CD-ROM read – Has loading tray – Replacement for the 4X CD-ROM (Model D2992B) and 12X CD-ROM drives |
|
DRIVE | | C1520H | 2GB external SureStore DAT2000e Single-Ended Narrow SCSI-2 DDS-1 tape drive |
|
DRIVE | | C1521H | HP SureStore 5000e – External 2/4GB DDS (DAT) drive – Single-ended narrow SCSI-2 |
|
DRIVE | | C1528H | 4/8GB SureStore DAT 8i Single-Ended Narrow SCSI-2 DAT tape drive |
|
DRIVE | | C1529H | 4/8GB external SureStore DAT 8e Single-Ended Narrow SCSI-2 DAT tape drive |
|
DRIVE | | C1555B | 12/24GB SureStore DAT 24i Single-Ended Narrow SCSI-2 DAT drive |
|
DRIVE | | C1556B | 12/24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DAT tape drive |
|
DRIVE | | C1559C | 6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
|
DRIVE | | C1559C | 6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
|
DRIVE | | C1559D | 6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
|
DRIVE | | C1559DR | 6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
|
DRIVE | | C1579A | 20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive |
|
DRIVE | | C1579AR | 20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive |
|
DRIVE | | C5658A | 70GB SureStore DLT 70e Single-Ended Wide SCSI-2 external DLT drive |
|
DRIVE | | C5726A | 80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive |
|
DRIVE | | D2035-60282 | 1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height – (Part of D2035A/B) |
|
DRIVE | | D2077-69001 | 2.0GB SCSI-2 hard drive – 5,400 RPM, 3.5-inch form factor |
|
DRIVE | | D3581-69001 | 1.05GB hot-swap Fast SCSI-2 hard drive module (Parchment White) |
|
DRIVE | | D3582-69001 | 2.1GB hot-swap SCSI-2 hard drive module (Dove Gray) |
|
DRIVE | | D3582-69002 | 2.1GB hot-swap hard drive module (Flint Gray) |
|
DRIVE | | D3582-69004 | 2.1GB hot-swap Ultra SCSI hard drive module (Quartz Gray) |
|
DRIVE | | D3583-69000 | 4.2GB hot-swap Ultra SCSI hard drive module – 7,200 RPM |
|
DRIVE | | D3583-69004 | 4.2GB hot-swap SCSI-2 hard drive module (Flint Gray) |
|
DRIVE | | D3583CR | 4.2GB ‘hot swap’ Ultra SCSI hard drive module – Quartz Gray |
|
DRIVE | | D3583CV | 4.2GB hot-swap Ultra SCSI hard drive module (Quartz Gray) |
|
DRIVE | | D4289-69001 | 9.1GB hot-swap Ultra SCSI-2 hard drive module (Quartz Gray) |
|
DRIVE | | D4903-69001 | 4.2GB hot-swap Ultra Wide SCSI hard drive module – 10,000 RPM |
|
DRIVE | | D4956-69001 | 4.2GB SCSI-2 hard drive – 7,200 RPM, 3.5-inch form factor |
|
DRIVE | | D5039-69001 | 18.2GB hot-swap Ultra Wide SCSI hard drive module – 7,200 RPM |
|
DRIVE | | D3583-69001 | 4.2GB hot-swap SCSI-2 hard drive module (Parchment White) |
|
DRIVE | | D6019-69002 | 9.1GB hot-swap Ultra Wide SCSI hard drive module – 10,000 RPM, SCA 80-pin connector |
|
MEMORY | | D4295-69001 | 32MB, 60nS, 72-bit EDO (Extended Data Output) DIMM memory module – (D4295A) – for HP LHII NetServer |
|
MEMORY | | D4296-69001 | 64MB, 60nS, 72-bit EDO (Extended Data Output) DIMM memory module – (D4296A)- for HP LHII NetServer |
|
MEMORY | | D4926-69001 | 265MB, 60nS, 72-bit EDO (Extended Data Output) DIMM memory module – (D4926A) – for HP LHII |
|
MEMORY | | D4297-69001 | 128MB, 60nS, 72-bit EDO (Extended Data Output) DIMM memory module – (D4297A) – for HP LHII NetServer |
|
PC BOARD | | D4248-69001 | HP LHII System (Mother) Board – with Super VGA, IDE and Two Fast/Wide SCSI-2 Controller Ports – Large Vertical Board in Center of Chassis |
|
PC BOARD | | D2967-69004 | HP LHII NetServer Remote Assistant Assy (for Outside of Canada/US) (D2967C) – without on-board Modem – When Upgrading from a D2967A/B to D2967C also Order Firmware/Software Upgrade Kit |
|
PC BOARD | | D2968-69005 | HP LHII Remote Assistant PC Board Assembly (Canada/US) (D2968C) – with on-board Modem – When Upgrading from a D2968A/B to D2968C also Order Firmware/Software Upgrade Kit |
|
PC BOARD | | D2969-69001 | HP LHII NetServer Remote Assistant Board (for Outside USA and Canada) (D2969C) – EISA Intelligent Remote Management Board with Onboard NiCad Battery, Processor, & Modem (Does NOT Include the LAM) |
|
PC BOARD | | D4840-68002 | HP LHII NetServer Power Management Board – Interfaces the Power Supply (or the Two Power Supplies) to the Rest of the Computer – Includes Power Supply Input and Power Output Connectors |
|
PC BOARD | | D5017-69001 | HP LHII Processor Board – Has Two Pentium II Processor IC Sockets, Two VRM Sockets, and Four DIMM Sockets |
|
PC BOARD | | 5183-3418 | HP LHII Terminator board – Used in secondary processor socket for a system with only one processor |
|
PC BOARD | | D2967-69004 | HP LH PII Remote Assistant Assy (for Outside of Canada/US) (D2967C) – without on-board Modem – When Upgrading from a D2967A/B to D2967C also Order Firmware/Software Upgrade Kit |
|
PC BOARD | | D3604-63003 | HP LHII Hot Swap’ Backplane Board – for the ‘Hot Swap’ Drives – Mounts in the Rear of the ‘Hot Swap’ Drive Cage (2 Used) |
|
INTERFACE | | J2577A | EISA 32-Bit LAN Interface Board – has 2 RJ-45 Connectors – Supports Both Ethertwist (10BASE-T) & 100VG/802.12 – (J2577A, 1/6 of J3007A, 1/24 of J3008A)
NO LONGER SUPPLIED |
|
INTERFACE | | 1150-2004 | EISA Fast SCSI-2 Host Bus Adapter (HBA) – (D2078A/B) |
|
INTERFACE | | C3610-69050 | Dual Channel Fast Wide SCSI Disk Array Controller Board – (P/O C3610A) – Plugs into a PCI Board Slot on the System (Mother) Board |
|
INTERFACE | | C3610A | PCI dual channel fast wide SCSI disk array controller board – Dual Channel Fast Wide SCSI Disk Array Controller Board – Plugs into a PCI Board Slot on the System (Mother) Board |
|
INTERFACE | | D2078B | EISA 32-Bit fast SCSI-2 host bus adaptor |
|
INTERFACE | | D2967C | Remote Assistant Board (for Outside of Canada/USA) – Intelligent EISA Based Remote Management Board with Onboard NiCad Battery and Processor – Does NOT Include a Modem |
|
INTERFACE | | D2969-69001 | Remote Assistant Board (for Outside USA and Canada) (D2969C) – EISA Intelligent Remote Management Board with Onboard NiCad Battery, Processor, & Modem (Does NOT Include the LAM) |
|
INTERFACE | | D2969C | Remote Assistant Board (for Outside the USA and Canada) – Intelligent EISA Based Remote Management Board with Onboard NiCad Battery, Processor, Modem, and Option Dependant LAM |
|
INTERFACE | | D4943-69001 | NetRAID 3-Channel Disk Array Controller – PCI Board With 3 Internal 68 Pin and 2 External 68 Pin High Density Ultra Wide SCSI Connectors (D4943A) |
|
INTERFACE | | D4943AV | NetRAID adapter – Includes disk array controller board, documentation, and NetServer Navigator CD-ROM |
|
INTERFACE | | D4992-69001 | NetRAID-1 One-Channel Disk Array Controller – PCI Board With One Internal 68 Pin High Density and One External 68 Pin High Density Ultra Wide SCSI Connector (D4992A) |
|
INTERFACE | | D4992A | NetRAID-1 one-channel disk array controller – PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector |
|
INTERFACE | | D4992AV | NetRAID-1 one-channel disk array controller – PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector |
|
INTERFACE | | D5013A | LAN Adapter – PCI 10/100TX LAN Board for NetServer |
|
INTERFACE | | J2577-69001 | EISA 32-Bit LAN Interface Board – has Two RJ-45 Connectors – One 10M bits/s (10Base-T) and One 100M bits/s (100VG/802.12) (P/O J2577A, 1/6 of J3007A, 1/24 of J3008A) |
|
INTERFACE | | J2585-69011 | 32-bit PCI LAN interface board – RJ-45 connectors – Supports both EtherTwist 10Base-T and 100VG/802.12 – (J2585B, part of J3009B, part of of J3010B) |
|
INTERFACE | | J2585A | PCI 32-Bit LAN Interface Board – has 2 RJ-45 Connectors – Supports Both Ethertwist (10BASE-T) & 100VG/802.12 (J2585A, 1/6 of J3009A, 1/24 of J3010A) |
|
INTERFACE | | J2585B | PCI 32-Bit LAN Interface Board – has RJ-45 Connector – Supports Both Ethertwist (10BASE-T) & 100VG/802.12 (J2585B, 1/6 of J3009B, 1/24 of J3010B) |
|
INTERFACE | | J3171-61021 | PCI LAN Interface Board – Has RJ-45 Connector for 10Base-T or 100Base-TX Ethernet (P/O J3171A, 1/6 of J3172A, 1/24 of J3173A) |
|
INTERFACE | | J3171A | PCI LAN Interface Board – Has RJ-45 Connector for 10Base-T or 100Base-TX Ethernet (P/O J3171A, 1/6 of J3172A, 1/24 of J3173A) |
|
INTERFACE | | J3171A | PCI LAN Interface Board – Has RJ-45 Connector for 10Base-T or 100Base-TX Ethernet (P/O J3171A, 1/6 of J3172A, 1/24 of J3173A) |
|
INTERFACE | | D2968-69005 | Remote Assistant PC Board Assembly (Canada/US) (D2968C) – with on-board Modem – When Upgrading from a D2968A/B to D2968C also Order Firmware/Software Upgrade Kit |
|
INTERFACE | | D2968C | Remote assistant board – Intelligent EISA based remote management board with onboard nickel cadmium (NiCd) battery, processor, and modem (Canada and USA) |
|
INTERFACE | | D4943A | NetRAID 3-Channel disk array controller – PCI board with 3 internal 68 pin and 2 external 68 pin high density Ultra wide SCSI connectors, manual, and NetServer Navigator CD-ROM |
|
POWER SUPPLY | | 5063-8368 | Autoranging power supply – 100-240VAC input, 410 watts – For worldwide use – Note: The same supply is used in upper or lower position (on models that have two supplies) |
|
POWER SUPPLY | | D4921A | Redundant power supply – Includes a 410-watt power supply, power management board, and documentation |
|
PROCESSOR | | D4975-63000 | Intel Pentium II processor – 266MHz (Klamath, 66MHz front side bus, 512KB Level-2 cache, Slot 1, ECC) – Does not include heat sink |
|
PROCESSOR | | D6034-63003 | Intel Pentium II processor – 300MHz (Klamath, 66MHz front side bus, 512KB Level-2 cache, Slot 1, ECC) – Includes heat sink |
|
PROCESSOR | | D6034-63002 | Intel Pentium II processor – 333MHz (Klamath, 66MHz front side bus, 512KB Level-2 cache, Slot 1, ECC) – Includes heat sink |
|