Type | Image | Référence | Description | Cotation |
---|
KEYBOARD | | 435302-001 | PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (USA) |
|
KEYBOARD | | C4739-60105 | ‘Windows’ keyboard assembly (Quartz Gray, 105 key) – Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ABF, European-French) – Replacement for the C1405B, C1405C, and D4950B Keyboards |
|
CABLE | | D4282B | Cable kit – Two internal SCSI cables and one adapter – Used with HP NetRAID-3si disk array controller |
|
CABLE | | D8520-63002 | SCSI cable kit with twisted pair segments, termination, and 50-pin (F) to 68-pin (F) adapter – Cable is marked ‘Int SCSI cable’ – 68-pin (M) connector marked ‘To SYS BD to C/TRAY’ to two 68-pin (M) connectors marked ‘To Common Tray’ – 1.2m (4.0ft) long – |
|
CABLE | | D8520-63004 | SCSI ribbon cable – Has 68-pin (M) connectors – 8.0cm (3.1in) long – To the hot-swap cage |
|
CABLE | | D8520-63005 | Cable assembly – Has an 18-pin (F) connector, a 24-pin (F) connector, and three 14-pin (F) connectors – Overall length is 13cm (5.1in) – Power supply cable |
|
CABLE | | D8520-63006 | Cable assembly – 22-pin (F) connector marked ‘P1’ to a 14.5cm (5.7in) cable with a 14-pin (F) connector marked ‘P2’, 42.7cm (16.8in) cable with two 4-pin (F) connectors, and a 57.2cm (22.5in) cable with two 4-pin (F) connectors – Power cable for the hot-s |
|
CABLE | | D8520-63008 | IDE CD-ROM drive ribbon cable – 40-pin (F) connector marked ‘to system board’ to a 40-pin (F) connector marked ‘to IDE CD-ROM’ – 33.0cm (13in) long – From IDE CD-ROM drive to the IDE connector on the system processor board |
|
CABLE | | D8520-63026 | Ultra Wide SCSI ribbon cable with twisted pair segments – One 68-pin (M) connector marked ‘to SYS BD to H/SWAP’ and one 68-pin (M) connector marked ‘to HOT SWAP’ – 1.1m (3.5ft) long |
|
CABLE | | D8600A | External SCSI cable kit – Attaches to punch out hole on back of chassis for external SCSI access |
|
CABLE | | D8520-63009 | Floppy drive ribbon cable marked ‘Floppy disk cable’ – 34-pin (F) connector marked ‘to system board’ to 34-pin (F) connector marked ‘to 3.5 inch flexible disk drive’ – 1.0m (3.4ft) long – From 3.5-inch floppy drive to the FDD connector on the system proce |
|
BEZEL | | D8520-63018 | Front bezel – Mounts to the front of the chassis – Used for pedestal configuration |
|
BEZEL | | D8520-63019 | Front bezel – Mounts to the front of the chassis – Used for rack configuration – Includes right bezel spacer |
|
FAN | | D8520-63013 | Hot-swap fan assembly – Includes three fans – Mounts in the fan Tray in the center of the chassis assembly |
|
RACK MOUNT KIT | | D8512A | LC 2000 pedestal to rack conversion kit – Includes slides, rails, rack bezel (for both HP and Rital racks), and cable management arm |
|
COVER | | D8520-63015 | Chassis top cover |
|
COVER | | D8520-63016 | Side cover – Covers right and left side |
|
COVER | | D8520-63025 | Drive bay cover – Covers an empty 5.25IN drive bay |
|
MOUSE | | C3751B | 2 button PS/2 serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-din connector |
|
MOUSE | | C3751-60201 | PS/2 two-button serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-DIN connector – (Part of C3751B) |
|
FILLER | | 5064-4689 | Hot-swap drive bay filler panel with lock |
|
STORAGE SYSTEM | | D5989C | NetServer Storage System/12 – External cabinet which can hold eight half height, or 12 low profile Ultra2 SCSI drives – Includes one Rack Storage 12 Ultra160 SCSI card |
|
STORAGE SYSTEM | | D3604B | NetServer Storage System/6 – External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules – Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s |
|
STORAGE SYSTEM | | D4902A | NetServer Rack Storage System/8 – Rack mounted cabinet which can hold up to eight hot-swap drive modules – Includes rack optimized storage cabinet (3U high) with eight hot pluggable bays, dual SCSI backplane, redundant hot swap power supply, and fans |
|
STORAGE SYSTEM | | D5989B | NetServer Storage System/12 – External cabinet which can hold eight half height, or 12 low profile Ultra2 SCSI drives – Includes one Rack Storage 12 Ultra2 SCSI card |
|
TERMINATOR | | D8520-63014 | Processor slot terminator module – Plugs into second processor slot when only one processor is installed |
|
DRIVE | | C1528H | 4/8GB SureStore DAT 8i Single-Ended Narrow SCSI-2 DAT tape drive |
|
DRIVE | | C1529H | 4/8GB external SureStore DAT 8e Single-Ended Narrow SCSI-2 DAT tape drive |
|
DRIVE | | C1555D | 24GB internal SureStore DAT 24i Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive (Flint) |
|
DRIVE | | C1556D | 24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive |
|
DRIVE | | C1556DR | 24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive |
|
DRIVE | | C1559C | 6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
|
DRIVE | | C1559D | 6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
|
DRIVE | | C1559DR | 6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
|
DRIVE | | C1579A | 20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive |
|
DRIVE | | C5647A | 20/40GB SureStore DLT 40i Single-Ended Narrow SCSI-2 internal DLT drive |
|
DRIVE | | C5677B | 6×12/24GB SureStore DAT 24×6i Single-Ended Narrow SCSI-2 internal autoloader DDS-3 (DAT) tape drive |
|
DRIVE | | D2035-60282 | 1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height – (Part of D2035A/B) |
|
DRIVE | | D6106-69001 | 9.1GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6106A) |
|
DRIVE | | D6106A | 9.1GB ‘hot swap’ Ultra2 SCSI hard drive module – 7200 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer |
|
DRIVE | | D6107-69001 | 9.1GB hot-swap Ultra2 SCSI hard drive module – 10,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6107A) |
|
DRIVE | | D6107A | 9.1GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer |
|
DRIVE | | D6108-69001 | 18.2GB hot-swap Ultra-2 SCSI hard drive module – 7,200 RPM, half height – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6108A) |
|
DRIVE | | D7049A | 9.1GB Ultra Wide SCSI hard drive – 10,000 RPM, 3.5-inch form factor |
|
DRIVE | | D7175A | 18GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer |
|
DRIVE | | D7176A | 18.2GB Ultra Wide SCSI hard drive – 7,200 RPM, 3.5-inch form factor |
|
DRIVE | | D8210A | 36.4GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer |
|
DRIVE | | D9419-69002 | 36.4GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer – (D9419A) |
|
DRIVE | | D9421-69001 | 18.2GB hot-swap Ultra3 SCSI hard drive module – 15,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D9421A) |
|
DRIVE | | P1166-69003 | 18.2GB ‘hot swap’ Ultra3 SCSI hard drive module – 10000 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer |
|
DRIVE | | P1167-69002 | 18.2GB Ultra3 Wide SCSI LVD hard drive module – 10,000 RPM, 3.5-inch form factor, 1.0-inch high (Seagate ST318404LW) |
|
DRIVE | | P1168-69003 | 9.1GB hot-swap Ultra3 SCSI hard drive module – 10,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1168A) |
|
DRIVE | | P1213-69001 | 9GB Ultra3 SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high |
|
DRIVE | | P1214-69002 | 9GB Ultra3 SCSI hard drive module – 10000 RPM, 3.5in form factor, low profile |
|
DRIVE | | P1215-69001 | 18GB Ultra3 SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high – Comes mounted on a drive tray |
|
DRIVE | | P1216-69001 | 18.2GB hot-swap Ultra3 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1216A) |
|
DRIVE | | P1217-69001 | 9.1GB hot-swap Ultra3 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (P1217A) |
|
DRIVE | | P3577-69001 | 73.4GB hot-swap Ultra3 SCSI hard drive module – 10,000 RPM, half height – Includes drive, hot swap tray, SCA extender, and bezel spacer |
|
DRIVE | | C1555DR | 24GB SureStore DAT 24i Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive |
|
DRIVE | | D4911A | 9.1GB Ultra Wide SCSI hard drive module – 7,200 RPM |
|
DRIVE | | P1169-69002 | 36.4GB Ultra3 Wide SCSI LVD hard drive module – 10,000 RPM (Seagate ST336704LW) |
|
REGULATOR | | D8520-63010 | Voltage regulator module – For Pentium III Coppermine and Xeon processors |
|
MEMORY | | D7132-69000 | 64MB SIMM memory module for NetRAID 3Si disk array controller – (D7132A) -for HP LC2000 |
|
MEMORY | | D8265-69001 | 128MB, 133MHz ECC SDRAM DIMM memory module – (D8265A) – for HP LC2000 |
|
MEMORY | | D8266-69001 | 256MB, 133MHz ECC SDRAM DIMM memory module – (D8266A) – foR HP LC2000 |
|
MEMORY | | D8267-69001 | 512MB, 133MHz ECC SDRAM DIMM memory module – (D8267A) – for HP LC2000 |
|
MEMORY | | D8268-69001 | 1GB, 133MHz ECC SDRAM DIMM memory module – (D8268A) – for HP LC2000 |
|
MEMORY | | D8264-69000 | 64MB, 133MHz ECC SDRAM DIMM memory module – (D8264A) -for HP LC2000 |
|
MEMORY | | D8264-69000 | 64MB, 133MHz ECC SDRAM DIMM memory module – (D8264A) -for HP LC2000 |
|
PC BOARD | | D8280A | HP LC2000 Duplexing Backplane – Attaches to Hot Swap Bay Backplane to Split 6 Bay Hot Swap Cage into Two 3 Bay Units with Separate Connectors |
|
PC BOARD | | D6028-69002 | HP NetServer LC2000 NetServer Remote Control Board with 4 Pin I2C Cable (D6028A) |
|
PC BOARD | | D8520-69000 | HP LC2000 NetServer System processor board – For up to two PIII processors with 133MHz FSB – Has integrated dual channel Ultra-2 SCSI controller, ATI Rage IIc video, and four DIMM sockets |
|
PC BOARD | | P1798-69001 | HP LC2000 NetServer System processor board – For up to two PIII processors with 133MHz FSB – Has integrated dual channel Ultra-3 SCSI controller, ATI Rage IIc video, and four DIMM sockets |
|
INTERFACE | | D9351A | NetRAID-4M Four-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors |
|
INTERFACE | | D2140-69004 | NetRAID-1Si One-Channel Disk Array Controller – PCI Board with One Internal 68 Pin High Density and One External 68 Pin Ultra High Density SCSI Connector (P/O D2140A) |
|
INTERFACE | | D2140A | NetRAID-1si – One-channel disk array controller – PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector |
|
INTERFACE | | D5013B | LAN Adapter – PCI 10/100TX LAN Board for NetServer |
|
INTERFACE | | D5025A | Wide SCSI Host Adapter Board – Installed in PCI Socket on System Backplane Board – May Need Cables D5968A and D6001A |
|
INTERFACE | | D5955A | NetRAID-3si three-channel disk array controller – PCI board with three internal 68 pin high density and three external 68 pin high density Ultra wide SCSI connectors |
|
INTERFACE | | D6028A | TopTools remote control card with battery (Version 1) – Allows emergency remote access using LAN or modem |
|
INTERFACE | | D9161A | NetRAID-4M Four-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors |
|
INTERFACE | | P1218A | TopTools remote control card with battery (Version 2.0) – Allows emergency remote access using LAN or modem |
|
INTERFACE | | P3410A | NetRAID-1M Single-Channel Disk Array Controller W/32MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors |
|
INTERFACE | | P3411A | NetRAID-2M Dual-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors |
|
INTERFACE | | P3413A | Ultra 160 LVD SCSI adapter board (Adaptec ASC-29160) – 64 bit, 66MHz PCI – External 68 pin high density LVD connector, internal 68 pin Ultra 160 LVD connector, internal 68 pin single-ended connector, internal 50 pin narrow single-ended connector |
|
INTERFACE | | P3475A | NetRAID-2M Dual-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors |
|
INTERFACE | | P3482A | Gigabit LAN adapter – PCI-X 10/100/1000TX 3Com LAN card – (3Com 3C996-T) |
|
POWER SUPPLY | | D8513A | HP LC 2000 redundant power supply kit – Includes one 350W power supply and power cord |
|
POWER SUPPLY | | D8520-63001 | Redundant hot swap power supply – Autoranging 100-240VAC input, 350 watts – Located in the back of the chassis |
|
PROCESSOR | | D8511-69000 | Intel Pentium III processor – 667MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink for HP LC2000 PIII/667 |
|
PROCESSOR | | D9184-69000 | Intel Pentium III processor – 733MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink foR HP LC2000 PIII/733 |
|
PROCESSOR | | D9185-69001 | Intel Pentium III processor – 800MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink for HP LC2000 PIII/800 |
|
PROCESSOR | | P1188-69001 | Intel Pentium III processor – 866MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink for HP LC2000 PIII/866 |
|
PROCESSOR | | P1807A | Intel Pentium III processor upgrade – Includes one 933MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache, Slot 1) processor with heat sink and voltage regulator module foR HP LC2000 PIII/933 |
|
PROCESSOR | | P2488-69001 | Intel Pentium III processor – 1.00GHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink for HP LC2000 PIII/1000 |
|
PROCESSOR | | P2488A | Intel Pentium III Processor upgrade – Includes one 1000MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) processor, voltage regulator, and heat sink for HP LC2000 PIII/1000 |
|
PROCESSOR | | D8509-69000 | Intel Pentium III processor – 533MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink for HP LC2000 PIII/533 |
|
PROCESSOR | | D8510-69000 | Intel Pentium III ‘600EB’ processor – 600MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink for HP LC2000 PIII/600 |
|
PROCESSOR | | P1807-69001 | Intel Pentium III processor – 933MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink for HP LC2000 PIII/933 |
|