‘Windows’ keyboard assembly (Quartz Gray, 105 key) – Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option AB6, Arabic-French)

PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (USA)

SCSI interface cable with thumbscrews on both ends – Highly flexible 68-pin high density (M) to 68-pin high density (M) – 90 Ohms – 2.5m (8.2ft) long

DC power distribution cable – From the power interconnect board to the system processor board

IDE hard drive ribbon cable marked ‘IDE hard disk cable’ – 40-pin (F) connector marked ‘To system board’ to a 40-pin (F) connector marked ‘To IDE drive’ – 74.9cm (29.5in) long – Cable D11

SCSI ribbon cable with termination – Cable is marked ‘Int SCSI cable 90 ohm’ – Has one 68-pin (M) connector marked ‘To system board’ and three 68-pin (M) connectors marked ‘To unterminated SCSI device’ – 1.9m (6.3ft) long

SCSI interface cable with thumbscrews on both ends – Highly flexible 68-pin ultra high density (M) to 68-pin high density (M) – 90 ohms – 2.5m (8.2ft) long

AC power distribution cable

CD-ROM drive power cable

SMB pair cable

SCSI data cable B

SCSI data cable A

FLoppy drive data cable

Fan module assembly – Has two large cooling fans for the processor boards and five smaller fans for chassis cooling mounted on a flat panel – Mounts in the middle of the Chassis assembly

4-port Console Switch (Quartz Gray) – Connect up to four computers to a single monitor, keyboard, and mouse – Includes hardware, user manual, and power cable

8-port Console Switch (Quartz Gray) – Connect up to eight computers to a single monitor, keyboard, and mouse – Includes hardware, user manual, and power cable

Adapter – 68-pin (M) to 50-pin (M) – Used to connect 68-pin (F) device to 50-pin (F) SCSI ribbon cable

Heat sink retainer clip – Retainer clip – Holds the heat sink on the Processor IC

LXr Pro removable chassis top cover

PS/2 two-button serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-DIN connector – (Part of C3751B)

2 button PS/2 serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-din connector

NetServer Rack Storage System/8 – Rack mounted cabinet which can hold up to eight hot-swap drive modules – Includes rack optimized storage cabinet (3U high) with eight hot pluggable bays, dual SCSI backplane, redundant hot swap power supply, and fans

SCSI-2 CD-ROM drive (Flint Gray) – 32X CD-ROM read – Has loading tray – Replacement for the 4X CD-ROM (Model D2992B) and 12X CD-ROM drives

20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive

20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive

1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height – (Part of D2035A/B)

64MB, 60nS, 36-bit parity ECC FPM (Fast Page Mode) SIMM memory module for HP LXr Pro 6/200

128MB, 60nS, 36-bit parity ECC FPM (Fast Page Mode) SIMM memory module for HP LXr Pro 6/200

512KB video DRAM

64MB, 60nS, 36-bit parity ECC FPM SIMM memory module – Must be installed in sets of four modules in the NetServer LX Series (product includes one SIMM)

32MB, 60nS, 36-bit parity ECC FPM SIMM memory module

128MB, 60nS, 36-bit parity ECC FPM SIMM memory module

32-slot DIMM memory board – Includes one 512MB ECC DIMM kit of 128MB DIMMs (4GB capacity with eight 512MB DIMM kits installed)

128MB, 60nS, ECC DIMM memory module – Must be installed in sets of four

512MB ECC DIMM kit – Includes four 128MB ECC DIMMs – Used to add 512MB to a D4967A DIMM memory board

512MB ECC DIMM kit – Includes four 128MB ECC DIMMs – Used to add 512MB to a D4967A DIMM memory board

32MB, 60nS, 36-bit parity ECC FPM (Fast Page Mode) SIMM memory module for HP LXr Pro 6/200

HP LXr Pro 6/200 NetServer Memory expansion board – With 16 SIMM slots (Does NOT include SIMM’S)

HP LXr Pro 6/200 NetServer system management board

HP LXr Processor slot termination board – Installs in second processor board slot – Processor Slot Termination Board – Installs in Second Processor Board Slot (Required in NetServers That Have Only One Processor Board)

HP NetServer Processor board – Can hold up to two Pentium pro 166MHz or 200MHz processors with 512KB cache – Processor Board – Can Hold up to Two Pentium Pro 166MHz or 200MHz Processors with 512KB Cache – Mounts on the System Processor Board – up to Two P

HP LXr 2/600 System processor board – Supports up to four processors on two processor boards – With integrated Super VGA video controller

HP LXr Processor board – Can hold up to two Pentium Pro 200MHz processors with 1MB cache – Processor Board – Can Hold up to Two Pentium Pro 200MHz Processors with 1MB Cache – Mounts on the System Processor Board – up to Two Processor Boards Can be Used

HP LXr Pro 6/200 Power Interconnect Board – Mounts Behind the Power Supplies

HP LXr Pro Memory expansion board – With 32 DIMM slots (Does NOT include DIMM’S)

HP LXr Front panel control board

PCI 32-BIT LAN interface board – Has RJ-45 connector – Supports both EtherTwist (10Base-T) and 100VG/802.12 – PCI 32-Bit LAN Interface Board – has RJ-45 Connector – Supports Both Ethertwist (10BASE-T) & 100VG/802.12 (J2585B, 1/6 of J3009B, 1/24 of J3010B)

PCI LAN Interface Board – Has RJ-45 Connector for 10Base-T or 100Base-TX Ethernet (P/O J3171A, 1/6 of J3172A, 1/24 of J3173A)

NetRaid 3-channel disk array controller – PCI board with 3 internal 68-pin and 2 external 68-pin High Density Ultra Wide SCSI connectors – NetRAID 3-Channel Disk Array Controller – PCI Board With 3 Internal 68 Pin and 2 External 68 Pin High Density Ultra

NetRAID 3-Channel disk array controller – PCI board with 3 internal 68 pin and 2 external 68 pin high density Ultra wide SCSI connectors, manual, and NetServer Navigator CD-ROM

NetRaid-1 one-channel disk array controller – PCI board with one internal 68-pin High Density and one external 68-pin High Density Ultra Wide SCSI connector – NetRAID-1 One-Channel Disk Array Controller – PCI Board With One Internal 68 Pin High Density an

Hot swap power supply – Autoranging, 90-264VAC

Intel Pentium Pro processor – 200MHz (P6, 1MB Level-2 cache)

Intel Pentium Pro processor – 200MHz (P6, 512KB Level-2 cache) – Does not include heat sink – (Part of D4867A)

Intel Pentium Pro processor upgrade – Includes one 200MHz (P6, 512KB Level-2 cache) processor and heat sink