Backplane Board – Horizontal Board in Center of Chassis – Connects to System Processor Board (2 PCI, 2 ISA, 2 Combo)

PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (USA)

‘Windows’ keyboard assembly (Quartz Gray, 105 key) – Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ABF, European-French) – Replacement for the C1405B, C1405C, and D4950B Keyboards

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 0.9m (3.0ft) long

Low Voltage Differential SCSI (LVDS) interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M), 90 ohms , 1.0m (3.3ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 128 ohms – 5.0m (16ft) long

SCSI interface cable with thumbscrews on both ends – 50-pin high density (M) to 68-pin high density (M) – 2.0m (6.6ft) long

SCSI interface cable – 50-pin high density (M) thumbscrew to 50-pin low density (M) bail lock – 1.0m (3.3ft) long

SCSI interface cable – 50-pin high density (M) thumbscrew to 50 pin-low density (M) bail lock – 2.0m (6.6ft) long

SCSI interface cable – 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock – 1.5m (4.9ft) long

Single-Ended SCSI-2 interface cable with bail locks on both ends – 50-pin low density (M) to 50-pin low density (M) – 5.0m (16ft) long – (C2928A)

SCSI interface cable – 50-pin low density (M) bail lock to 68-pin high density (M) thumbscrew – 1.0m (3.3ft) long – (C2915A)

SCSI interface cable – 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock – 2.5m (8.2ft) long

SCSI interface cable – 50-pin low density (M) bail lock to 68-pin high density (M) thumbscrew – 2.0m (6.6ft) long – (A3401A Option 002)

Ultra Wide SCSI-2 cable kit – Terminated internal ribbon cable with five high density 68-pin (M) connectors and one high density 68-pin (F) to 50-pin (F) adapter

SCSI interface cable with thumbscrews on both ends – 50-pin high density (M) to 68-pin high density (M) – 1.0m (3.3ft) long – (C2961A)

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 50-pin high density (M) – 5.0m (16ft) long – (C2907A)

Floppy drive ribbon cable marked ‘Floppy disk’ – 34-pin (F) connector marked ‘CPU end’ to a 34-pin (F) old-style edge connector and a 34-pin (F) new-style connector – 47.2cm (18.6in) long – From floppy drive to system processor board

SCSI interface cable with thumbscrews on both ends – 50-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

IDE CD-ROM/DVD-ROM drive ribbon cable kit – Installation instructions and a cable – 40-pin (F) connector marked ‘CPU End’ to two 40-pin (F) connectors – 33.7cm (13.3in) long – From primary IDE connector to one or two internal drives

CD-ROM drive ribbon cable – Has two IDE drive connectors – From secondary IDE connector on the system processor board to one or two CD-ROMs

Single-Ended SCSI-2 interface cable with bail locks on both ends – 50-pin low density (M) to 50-pin low density (M) – 1.0m (3.3ft) long – (92222B)

Single-Ended SCSI-2 interface cable with bail locks on both ends – 50-pin low density (M) to 50-pin low density (M) – 0.5m (1.6ft) long – (92222A, part of 98658A)

Single-Ended SCSI-2 interface cable with bail locks on both ends – 50-pin low density (M) to 50-pin low density (M) – 2.0m (6.6ft) long – (92222C)

Single-Ended SCSI-2 interface cable – 50-pin low density (M) with bail locks to 50-pin low density (M) with thumb screws – 1.0m (3.3ft) long – (K2284)

Single-Ended SCSI-2 interface cable with thumbscrews on both ends – 50-pin high density (M) to 50-pin high density (M) – 1.0m (3.3ft) long – (C2908A)

Single-ended SCSI-2 interface cable with bail locks on both ends – 50 pin low density (M) to 50 pin low density (M) – 0.5m (1.6ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 128 Ohms – 1.0m (3.3ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 128 Ohms – 2.5m (8.2ft) long

Single-ended SCSI-2 interface cable with thumbscrews on both ends – 50 pin high density (M) to 50 pin high density (M) – 0.5m (1.6ft) long

SCSI interface cable with thumbscrews on both ends – 50 pin high density (M) to 50 pin high density (M) – 1.5m (4.9ft) long

Single-ended SCSI-2 interface cable with thumbscrews on both ends – 50 pin high density (M) to 50 pin high density (M) – 2.0m (6.6ft) long

Single-ended SCSI-2 interface cable with thumbscrews on both ends – 50 pin high density (M) to 50 pin high density (M) – 5.0m (16ft) long

SCSI interface cable with thumbscrews on both ends – 50 pin high density (M) to 68 pin high density (M) – 0.5m (1.6ft) long

SCSI interface cable with thumbscrews on both ends – 50 pin high density (M) to 68 pin high density (M) – 1.5m (4.9ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 90 Ohms – 0.5m (1.6ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 128 Ohms – 0.5m (1.6ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 90 Ohms – 1.5m (4.9ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 128 Ohms – 1.5m (4.9ft) long

SCSI interface cable with thumbscrews on both ends – Ultra flexible 68 pin high density (M) to 68 pin high density (M) – 0.5m (1.6ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin ultra high density (M) to 68-pin high density (M) – 1.0m (3.3ft) long

Single-ended SCSI cable – 50-pin low density (M) with bail locks to 68-pin high density (M) with thumbscrews – Has active termination in the 68-pin connector for high order byte – 1m (3.3ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 0.9m (3.0ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 1.5m (4.9ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

Low Voltage Differential/Ultra2 Single-Ended SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 128 Ohms – 5.0m (16ft) long

SCSI interface cable with thumbscrews on both ends – 50-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – Highly flexible 68 pin high density (M) to 68 pin high density (M) – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – Highly flexible 68 pin high density (M) to 68 pin high density (M) – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – Highly flexible 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – Highly flexible 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

Wide SCSI cable kit – Internal cable connected to controller board – Contains one cable for NetServer LCII and one cable for NetServer E-series – From D5025A controller board to internal drives

Single-Ended SCSI-2 interface cable – 50-pin low density (M) with bail locks to 50-pin low density (M) with thumb screws – 1.5m (4.9ft) long

SCSI interface cable – 50-pin low density (M) bail lock to 50-pin high density (M) latch/clip – 1.5m (4.9ft) long – (K2285)

SCSI interface cable – 50-pin low density (M) bail lock to 50-pin high density (M) latch/clip – 1.0m (3.3ft) long

SCSI interface cable – 50-pin low density (M) bail lock to 50-pin high density (M) latch/clip – 1.0m (3.3ft) long – (K2286)

SCSI interface cable – 50-pin high density (M) thumbscrew to 50-pin low density (M) thumbscrew – 0.9m (3.0ft) long

SCSI interface cable – 50-pin high density (M) thumbscrew to 50-pin low density (M) thumbscrew – 1.5m (4.9ft) long

Single-Ended SCSI-2 interface cable – 50-pin high density (M) thumbscrew to 50-pin low density (M) bail lock – 1.0m (3.3ft) long

Single-Ended SCSI-2 interface cable with bail locks on both ends – 50-pin low density (M) to 50-pin low density (M) – 3.0m (9.8ft) long – (C2927A)

Internal Narrow SCSI cable – Has 50-pin connectors for four drives – For D5025A Wide SCSI host adapter board

SCSI interface cable – Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends – 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

Single-Ended SCSI-2 interface cable – 50-pin high density (M) thumbscrew to 50-pin low density (M) bail lock – 1.5m (4.9ft) long – (K2297)

Chassis assembly – Includes chassis, exterior cover, upper fan, airflow guide/cover assembly, 2 RFI filler panels, I/O Board RFI shield, and the cover lock assembly

Front bezel assembly – Includes front bezel, filler panels, keylock assembly, power button, lightpipe, latch assembly, and label

Lower auxiliary fan assembly – Mounts on the back panel next to the rear hard drives

Fan and airflow guide assembly – Includes plastic airflow guide, metal top cover, and cooling fan – Mounts at top of chassis

Adapter – 68-pin high density (F) to 50-pin (F) – Used to connect 68-pin (M) ribbon cable to 50-pin (M) Narrow SCSI device – (C5710A)

Adapter – 68-pin high density female to 50-pin female – Used to connect 68-pin male ribbon cable to 50-pin male Narrow SCSI device

Adapter – 68-pin high density female to 50-pin female – Used to connect 68-pin male ribbon cable to 50-pin male Narrow SCSI device

Heat sink clip – Heat sink clip for Pentium II module – Two used

PS/2 two-button serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-DIN connector – (Part of C3751B)

2 button PS/2 serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-din connector

NetServer Storage System/6 – External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules – Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s

NetServer Storage System/6 – External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules – Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s

Single-ended SCSI active terminator – Has 50 pin low density (M) connector with bail locks

Active Single-Ended SCSI terminator – Has 50 pin high density connector with thumbscrews

Single-Ended SCSI active terminator – Has 50-pin low density connector (M) with bail locks – (K2291)

Active Wide Single-Ended SCSI terminator – With 68-pin high density (M) connector with thumbscrews

Single-Ended SCSI-2 active terminator – Has 50-pin high density (M) connector with thumbscrews – (C2904A)

2GB external SureStore DAT2000e Single-Ended Narrow SCSI-2 DDS-1 tape drive

HP SureStore 5000e – External 2/4GB DDS (DAT) drive – Single-ended narrow SCSI-2

HP SureStore tape 2000i – 2GB narrow SCSI-2 internal DDS (DAT) drive

4/8GB SureStore DAT 8i Single-Ended Narrow SCSI-2 DAT tape drive

4/8GB external SureStore DAT 8e Single-Ended Narrow SCSI-2 DAT tape drive

12/24GB SureStore DAT 24i Single-Ended Narrow SCSI-2 DAT drive

4GB HP SureStore T4i tape drive – Without resistor packs (SIPS)

4/8GB SureStore T4i Single-Ended Narrow SCSI-2 internal Travan tape drive

4/8GB SureStore T4i Single-Ended Narrow SCSI-2 internal Travan tape drive

4/8GB SureStore T4i Single-Ended Narrow SCSI-2 internal Travan tape drive

1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height – (Part of D2035A/B)

2.5GB Ultra ATA/33 hard drive – 3.5-inch form factor, low profile

2.5GB Ultra ATA/33 IDE hard drive – 3.5-inch form factor, 1.0-inch high

2.1GB ‘hot swap’ Ultra SCSI hard drive module – Quartz Gray

IDE CD-ROM drive with integral loading tray – 24X CD-ROM read

IDE CD-ROM drive with integral loading tray – 24X CD-ROM read

IDE CD-ROM drive – 48X CD-ROM read (Mitsumi CRMC-FX4820T) – Has front panel headphone jack and volume control

4.2GB Ultra Wide SCSI hard drive – 7,200 RPM

4.2GB Wide Single-Ended SCSI hard drive – 7,200 RPM

9.1GB Ultra Wide SCSI hard drive module – 7,200 RPM

9.1GB Ultra Wide SCSI hard drive module – 7,200 RPM

4.3GB Ultra ATA/33 hard drive – 5,400 RPM, 3.5-inch form factor, 1.0-inch high (Quantum Fireball, SE43A101)

9.1GB ‘hot swap’ Ultra SCSI hard drive module – Quartz Gray

64MB, 60nS, 36-bit parity ECC FPM (Fast Page Mode) SIMM memory module – Must be installed in sets of two for NetServer E-Series (D4290A) for HP E50 PII/3xx

32MB, 60nS, 36-bit parity ECC FPM (Fast Page Mode) SIMM memory module – Must be installed in sets of two for NetServer E-Series (D4892A) for HP E50 PII/3xx

HP E50 System Processor Board – Has Integrated Super VGA Video Controller, IDE Controller, Floppy Controller, 2 Serial Ports and 1 Parallel Port – Plugs Into the Backplane Board

Intel Pentium II processor – 333MHz (Klamath, 66MHz front side bus, 512KB Level-2 cache, Slot 1, ECC) – Includes heat sink

Intel Pentium II processor – 300MHz (Klamath, 66MHz front side bus, 512KB Level-2 cache, Slot 1, ECC) – Includes heat sink