5GB, 8mm Single-Ended SCSI (DAT) tape drive

2.0GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor, low profile (Quantum)

2.0GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor, low profile

4.2GB Ultra Wide SCA SCSI hard drive – 3.5-inch form factor, 1.0-inch high (Seagate ST34573WC) – Includes SCA to 68-pin Differential Ultra Wide SCSI adapter board with power connector and jumpers

12GB Single-Ended SCSI DDS-3 tape (DAT) drive

9.0GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor, half height

4.0GB Single-Ended SCSI DDS-2 tape (DAT) drive – 5.25-inch form factor

2.0GB Fast Wide SCSI hard drive – 3.5-inch form factor, half height

Single-Ended SCSI-2 CD-ROM drive – 4X CD-ROM read

1.0GB Fast Wide SCSI hard drive – 3.5-inch form factor, low profile

4GB/8GB Single-Ended SCSI DDS-2 tape (DAT) drive

1.0GB Fast Wide SCSI-2 hard drive – 3.5-inch form factor, low profile

4.0GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor, half height

9.1GB Ultra Wide SCA SCSI hard drive – 3.5-inch form factor, 1.0-inch high (Seagate ST39236LC) – Includes SCA to 68-pin Differential Ultra Wide SCSI adapter board with power connector and jumpers

SCSI-2 CD-ROM drive – 12X CD-ROM read

Narrow Single-Ended SCSI-2 slot load DVD-ROM drive – 6X DVD-ROM read, 32X CD-ROM read (Pioneer DVD-303/304) – Has headphone jack and volume control

Narrow Single-Ended SCSI-2 slot load DVD-ROM drive – 6X DVD-ROM read, 32X CD-ROM read (Pioneer DVD-303/304) – Has headphone jack and volume control

12GB/24GB Single-Ended SCSI-2 DDS-3 (DAT) tape drive – 5.25-inch form factor

128MB ECC SIMM high-density memory upgrade kit for HP3000 989KS/200

32MB, 72-pin ECC DIMM memory module for HP3000 989KS/200

16MB, 72-pin ECC DIMM memory module for HP3000 989KS/200

64MB, 72-pin ECC DIMM memory module for HP3000 989KS/200

32MB ECC SIMM memory module for HP3000 989KS/200

128MB, 72-pin ECC DIMM memory module for HP3000 989KS/200

256MB ECC SIMM high-density memory upgrade kit for HP3000 989KS/200

64MB ECC memory upgrade kit for HP3000 989KS/200

256MB ECC DIMM memory module for HP3000 989KS/200

512MB ECC memory upgrade kit for HP3000 989KS/200

HP3000 989KS/200 Core I/O interface board – Includes all the system interfaces

HP3000 989KS/200 Dual bus 4 slot HP-HSC expansion board

HP3000 989KS/200 Peripherial drive bay interconnect board

HP3000 989KS/200 Modem board

HP3000 989KS/200 Audio board for the core I/O board

HP3000 989KS/200 Texture memory board – Mounted on the VISUALIZE-48XP frame buffer and geometry accelerator board

HP3000 989KS/200 4 slot HP-HSC expansion board – Does not include the HP-HSC expansion I/O board tray

HP3000 989KS/200 2 slot HP-HSC expansion board

HP3000 989KS/200 VISUALIZE-48XP – 1280 × 1024 accelerated 3D solids 48-plane color graphics board with 8 overlay planes

HP3000 989KS/200 Power monitor board

HP3000 989KS/200 System processor board – For 6-way processor configuration

Single-ended SCSI-2 and Centronics host adapter board – Includes a 1.0m (3.3ft) SCSI cable – For the HP-PB I/O board slot

Fiber channel adapter – 1063Mbps adapter installed in an HP K-Class computer HSC expansion board – For linking to fiber channel mass storage only

Dual Bus 4 Slot HP-HSC Expansion Board – Provides two HSC busses with two slots each – Occupies processor slots 4 & 5

4 slot HP-HSC expansion board – Provides four HSC slots

2 slot HP-HSC expansion board – Provides two HSC slots

LAN adapter – Fiber distributed data interface network board – Has two fiber ports – Mounts in an HP-HSC expansion board

ATM/155 – 155Mbps HP-HSC network interface adapter

Fast wide differential SCSI-2 host adapter board kit – Includes 2.5m (8.2ft) SCSI cable – For the HP-PB I/O board slot

Fast Wide SCSI interface board

Fast Wide SCSI Interface Board (20MB/Sec.Transfer Rate) – for the HP-HSC I/O Board Slot

Fiber channel adapter – 1063Mbps adapter installed in an HP K-Class computer HSC expansion board – For linking to fiber channel mass storage only

Fiber channel adapter – 266MBPS adapter for mount in an HSC expansion board

Visualize audio board

1000Base-SX HP-HSC single port Gigabit Ethernet fiber channel LAN adapter – Mounts in an HP-HSC expansion board

LAN Adapter for mount in an HP-HSC expansion board J3514A #001 – Two port 100Base-T LAN adapter J3514A #002 – Two port 100Base-fx LAN adapter

Power supply assembly (Zytec/Artesyn 2294660) – 90-264VAC input, 47-63Hz – Four DC outputs, 1200 watts

HP PA-RISC processor – 200MHz PA-RISC 8200 with 4MB cache

HP PA-RISC processor upgrade kit – Includes one processor 200MHz PA-RISC 8200 with 4MB cache