Peripheral interconnect board power cable

Integrated peripheral power harness

Disk array controller kit – SCSI adapter to connect internal channel of disk array controllers to outside of server – Cables are attached for up to six disk array controllers

SCSI interface cable with thumbscrews on both ends – Highly flexible 68 pin high density (M) to 68 pin high density (M) – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – Highly flexible 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

Floppy drive data cable

Front panel control board cable

AC power harness kit

Cable assembly – From DC power harness to midplane

Peripheral interconnect board ribbon cable

Internal SCSI data cable

Lower fan module power harness

Upper fan module power harness

Satellite chassis assembly – Includes slide halves, PIN board, mid-plane board, DC harness and peripheral interconnect board, data cables, and power cables

Front bezel including drive bay door and control panel bezel

Upper fan module assembly – Includes six fans

Lower fan module – Includes four fans

Rear switch assembly and pawl – Includes power switch cable

4-port Console Switch (Quartz Gray) – Connect up to four computers to a single monitor, keyboard, and mouse – Includes hardware, user manual, and power cable

8-port Console Switch (Quartz Gray) – Connect up to eight computers to a single monitor, keyboard, and mouse – Includes hardware, user manual, and power cable

Adapter – 68-pin high density (F) to 50-pin (F) – Used to connect 68-pin (M) ribbon cable to 50-pin (M) Narrow SCSI device – (C5710A)

Adapter – 68-pin high density female to 50-pin female – Used to connect 68-pin male ribbon cable to 50-pin male Narrow SCSI device

Adapter – 68-pin high density female to 50-pin female – Used to connect 68-pin male ribbon cable to 50-pin male Narrow SCSI device

Satellite chassis top cover – Includes labels

5.25-inch filler panel (Quartz Gray) – For empty 5.25-inch drive bays above the Hot-Swap drive bay

2 button PS/2 serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-din connector

NetServer Rack Storage System/8 – Rack mounted cabinet which can hold up to eight hot-swap drive modules – Includes rack optimized storage cabinet (3U high) with eight hot pluggable bays, dual SCSI backplane, redundant hot swap power supply, and fans

SCSI-2 CD-ROM drive (Flint Gray) – 32X CD-ROM read – Has loading tray – Replacement for the 4X CD-ROM (Model D2992B) and 12X CD-ROM drives

9.1GB ‘hot swap’ Ultra SCSI hard drive module – Quartz Gray

12/24GB SureStore DAT 24i Single-Ended Narrow SCSI-2 DAT drive

1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height – (Part of D2035A/B)

4.2GB ‘hot swap’ Ultra SCSI hard drive module – Quartz Gray

4.2GB hot-swap Ultra Wide SCSI hard drive module – 10,000 RPM

4.2GB Wide Single-Ended SCSI hard drive – 7,200 RPM

9.1GB Ultra Wide SCSI hard drive module – 7,200 RPM

18.2GB hot-swap Ultra Wide SCSI hard drive module – 7,200 RPM

128MB SDRAM DIMM memory module for HP LXr Pro8 6/200

256MB memory upgrade kit – Includes two 128MB, 100MHz unbuffered ECC SDRAM DIMMs

Memory expansion kit – Includes one memory board – Increases memory capacity from 4GB to 8GB when both boards are full – It must be populated with (D5026A), 256MB SDRAM kit

HP LXr Pro8 NetServer Peripheral interconnect board

HP LXr Pro8 6/200 PIN adapter board – For connection to docking station chassis when chassis are pushed together – PIN Adapter Board – For Connection to Docking Station Chassis When Chassis are Pushed Together – Mounts on Satellite Chassis

HP LXr Pro8 6/200 Processor slot termination board – Installs in unused processor board slot (One required for each processor board slot that is unused)

HP LXr Processor Board – Can Hold up to Two Processors – Mounts on the System Processor Board – up to Four Processor Boards Can be Used – Includes Two Heat Pipes and P6/200 Processors

HP LXr Pro8 Ultra VGA video board – Includes 2MB integrated RAM

HP LXr Pro8 6/200 Front panel control board

HP LXr Pro8 6/200 NetServer Power Control Board (8051) – Mounts on SCSI Extender Board

HP LXr Pro8 System processor board mounted on tray – Has four processor board slots and eight PCI slots

HP LXr NetServer 4GB memory board – Has 32 SDRAM DIMM slots with a maximum of 4GB of memory using 128MB DIMMS

NetRAID 3-Channel disk array controller – PCI board with 3 internal 68 pin and 2 external 68 pin high density Ultra wide SCSI connectors, manual, and NetServer Navigator CD-ROM

PCI 10Base-T/100Base-TX LAN board – LAN Adapter – PCI 10/100TX LAN Board for NetServer

SCSI extender board – Has six external Ultra SCSI ports – Includes power control board

SCSI extender board – Has six external Ultra SCSI ports

PCI 32-BIT LAN interface board – Has RJ-45 connector – Supports both EtherTwist (10Base-T) and 100VG/802.12 – PCI 32-Bit LAN Interface Board – has RJ-45 Connector – Supports Both Ethertwist (10BASE-T) & 100VG/802.12 (J2585B, 1/6 of J3009B, 1/24 of J3010B)

Hot swap redundant power supply module – 200-240VAC input

NetServer LXr Pro8 hot-swap fan & power supply service kit – Includes one power supply, one L-shaped fan cage, and one in-line fan cage

Dual Pentium Pro processor upgrade kit – Includes one processor board and two Pentium pro 200MHz (P6, 1MB Level-2 cache) processors