PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (USA)

‘Windows’ keyboard assembly (Quartz Gray, 105 key) – Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ABF, European-French) – Replacement for the C1405B, C1405C, and D4950B Keyboards

Floppy drive ribbon cable – 34-pin (F) connector marked ‘to system board’ to 34-pin (F) connector – 26.7cm (10.5in) long – From floppy drive to FDD connector on the system processor board

Ultra Wide LVD SCSI cable with twisted pair segments and termination – One 68-pin (M) connector marked ‘To adapter’, one 68-pin (M) connector marked ‘To drive’, and four unmarked 68-pin (M) connectors – 1.2m (3.9ft) long

Internal/external SCSI cable – Internal high density 68-pin (M) connector with latch clips and external high density 68-pin (F) connector supporting both latch clips and thumbscrews – 58cm (23in) long – From chassis to system processor board

Ultra wide LVD SCSI cable kit with termination – Includes cable clamp and terminated SCSI cable – Cable has three 68-pin (M) connectors – 58.4cm (23in) long

SCSI cable (Internal) – Has three 68-pin SCSI connectors and a terminator

Internal/external SCSI cable – Has one internal 68-pin SCSI connector and one external 68-pin SCSI connector

IDE CD-ROM drive ribbon cable marked ‘CABLE CD-ROM’ – Two 40-pin (F) connectors – 24.2cm (9.5in) long

Front bezel (plastic) – For use with the E60 and E800 only

Fan assembly – Mounts on the rear of the chassis assembly – For Cooling the Processors and other components

Tubeaxial fan – For cooling the processors and other components – Mounts on the inside rear of the chassis assembly

HP rack mount kit for NetServer E60, E200, and E800 – Includes pair of rails, plastic bezel trim, mounting hardware, and installation instructions

E800 top cover assembly

I/O panel assembly – Mounts to the back of the chassis – Has cutouts for I/O connectors

Airflow guide – Directs air to the processors for cooling – Mounts in front of the fan

24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive

NetServer Storage System/6 – External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules – Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s

1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height – (Part of D2035A/B)

24GB internal SureStore DAT 24i Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive (Flint)

24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive

6×12/24GB external SureStore DAT 24×6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive

20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive

20/40GB SureStore DAT40i internal DDS-4 tape drive

20/40GB SureStore DAT40i internal DDS-4 tape drive

20/40GB SureStore DAT40e external DDS-4 tape drive

20/40GB SureStore DAT40×6e DDS-4 external autoloader tape drive

80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive

9.1GB Ultra Wide SCSI hard drive module – 7,200 RPM

9.1GB Ultra Wide SCSI hard drive module – 7,200 RPM

18.2GB Ultra3 Wide SCSI LVD hard drive module – 10,000 RPM, 3.5-inch form factor, 1.0-inch high (Seagate ST318404LW)

18.2GB Ultra3 Wide SCSI LVD hard drive module – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

36.4GB Ultra3 Wide SCSI LVD hard drive module – 10,000 RPM (Seagate ST336704LW)

36.4GB Ultra3 Wide SCSI LVD hard drive module – 10,000 RPM, 3.5-inch form factor, low profile

9.1GB Ultra3 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, low profile

18.2GB Ultra3 Wide SCSI LVD hard drive – 7,200 RPM, 3.5-inch form factor, low profile

20/40GB SureStore DAT40X6e DDS-4 external autoloader tape drive

9GB Ultra3 SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high

9.1GB Ultra3 Wide SCSI hard drive module – 7,200 RPM, 3.5-inch form factor, low profile

9GB Ultra3 SCSI hard drive module – 10000 RPM, 3.5in form factor, low profile

18GB Ultra3 SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high – Comes mounted on a drive tray

256MB, 133MHz ECC SDRAM DIMM memory module – (D8266A) – for HP E800 NetServer

512MB, 133MHz ECC SDRAM DIMM memory module – (D8267A) for HP E800

64MB SIMM memory module for NetRAID 3Si disk array controller – (D7132A)

128MB, 133MHz ECC SDRAM DIMM memory module – (D8265A) for HP E800

HP E800 NetServer System Processor Board – Dual processor, 133 front side bus with integrated dual channel SCSI controller and ATI XL video controller with 4MB

LAN adapter – PCI 10/100Base-TX LAN board – LAN Adapter – PCI 10/100TX LAN Board for NetServer (D5013A)

NetRaid-2M dual-channel disk array controller W/128MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-1Si One-Channel Disk Array Controller – PCI Board with One Internal 68 Pin High Density and One External 68 Pin Ultra High Density SCSI Connector (P/O D2140A)

NetRAID-1si – One-channel disk array controller – PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector

LAN Adapter – PCI 10/100TX LAN Board for NetServer

Wide SCSI Host Adapter Board (D5025A) – Installed in PCI Socket on System Backplane Board

Wide SCSI Host Adapter Board – Installed in PCI Socket on System Backplane Board – May Need Cables D5968A and D6001A

NetRAID-3Si Three-Channel Disk Array Controller – PCI Board With Three Internal 68 Pin High Density and Three External 68 Pin High Density Ultra Wide SCSI Connectors (D5955A)

NetRAID-3si three-channel disk array controller – PCI board with three internal 68 pin high density and three external 68 pin high density Ultra wide SCSI connectors

NetRaid-4M four-channel disk array controller W/64MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-4M Four-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

NetRaid-4M four-channel disk array controller W/128MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-4M Four-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

NetRaid-1M single-channel Ultra3 SCSI disk array controller W/32MB cache – PCI board with one internal 68-pin High Density and one external 68-pin Very High Density Ultra3 SCSI connector

NetRAID-1M Single-Channel Disk Array Controller W/32MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

NetRAID-2M Dual-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

Ultra160 LVD SCSI adapter board (Adaptec ASC-29160) – 64-bit, 66MHz PCI – External 68-pin High Density LVD connector, internal 68-pin Ultra160 LVD connector, internal 68-pin SE connector, internal 50-pin Narrow SE connector

Ultra 160 LVD SCSI adapter board (Adaptec ASC-29160) – 64 bit, 66MHz PCI – External 68 pin high density LVD connector, internal 68 pin Ultra 160 LVD connector, internal 68 pin single-ended connector, internal 50 pin narrow single-ended connector

NetRAID-2M Dual-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

Gigabit LAN adapter – PCI-X 10/100/1000TX 3Com LAN card – (3Com 3C996-T)

Power supply – Autoranging 110/220VAC input, 50-60Hz, 256 watts – Has fan speed control – For worldwide use

Intel Pentium III processor – 733MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink and fan – for HP E800 PIII/733 NetServer

Intel Pentium III processor – 733MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink and fan for HP E800 PIII/800 NetServer

Intel Pentium III ‘800EB’ Processor upgrade – Includes one 800MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache, Socket 370) processor with heat sink and cooling fan

Intel Pentium III processor – 866MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink and fan for HP E800 PIII/866

Intel Pentium III Processor upgrade – Includes one 866MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) processor, heat sink, and cooling fan

Intel Pentium III processor – 933MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) – Includes heat sink and fan foR HP E800 PIII/933

Intel Pentium III processor – 1.00GHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache, socket 370) – Includes heat sink for HP E800 PIII/1000

Intel Pentium III Processor upgrade – Includes one 866MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) processor, heat sink, and cooling fan

Intel Pentium III Processor upgrade – Includes one 1000MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache, Socket 370) processor and heat sink