HP-UX ‘VISUALIZE’ keyboard kit – Includes PS/2 keyboard, 3-button Mouse, mouse pad (with the ‘VISUALIZE’ logo), software on CD-ROM, working in comfort and start up guides

HP Windows keyboard – Has attached 6-pin mini-din cable – Includes keyboard and ergomonic information booklet

‘VIZUALIZE’ PS/2 keyboard assembly (Quartz Gray, 102 key layout) – Has attached 1.8m (6.0ft) cable with 6-pin mini-DIN connector (European French)

SCSI-3 cable – Has a 68-pin (M) internal connector and a high density 68-pin (F) external connector – 20cm (8.0in) long

LED cable assembly – Includes a 5 pin (F) connector with an attached transistor and mounting hardware, 18cm (7.1in) long

Single-ended SCSI cable internal ribbon cable with three 50 pin (F) connectors and a terminator at one end, 0.5m (1.5ft) long

Fast wide SCSI internal ribbon cable – Has three high density 68 pin (M) connectors, a terminator, and a ferrite, 0.3m (1.0ft) long

SCSI-2 cable – Has a 50-pin (F) internal connector and a high density 50-pin (F) external connector – 20cm (8.0in) long

Drive power cable – Has three 4-pin (F) connectors – 34cm (13.4in) long – For peripheral drive

CD-ROM cable

Ultra wide SCSI internal ribbon cable with active termination – Has three 68 pin (M) connectors, 25cm (10in) long

Ultra Wide SCSI ribbon cable – Has a 68-pin (M) internal connector and a 68-pin (F) external connector with bracket to attach to chassis – 23cm (9.0in) long

Chassis assembly – Includes base chassis, SCSI bulkhead, I/O bulkhead, I/O support cover assembly, backplane support, peripheral tray with EMI divider and drive trays, system board tray with extractors, CPU cage and CPU cooling fan

Chassis subassembly – Base metal chassis only

Chassis assembly – Includes base chassis, SCSI bulkhead, I/O bulkhead, I/O support cover assembly, and backplane support

Peripheral carrier assembly – Does not include drive trays

PCI/EISA board tray assembly – Metal cage that holds PCI/EISA PCA – Includes I/O card slot covers and cooling fan

Front fan assembly (Panaflo FBA08T12H) – 12VDC, 0.26A – Housing dimensions 80mm x 80mm x 15mm – Includes LED and thermistor cable assembly

Tubeaxial fan – 90mm x 90mm – For the CPU/SRAM/EISA/PCI – Mounts under the processor cover

Fan assembly – Includes two 60mm x 60mm x 25mm fans (12VDC, 0.22A, Panaflo FBA06A12H) each with cables attached to a single 6-position female connector

TOC (transfer of control) button/switch/cable – Protected momentary contact pushbutton switch with attached 18cm (7.0in) long, 3-conductor cable with 3-pin (F) connector

HP VISUALIZE-FX10 Pro PCI graphics card

VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics – Includes color recovery – Has EVC video output connector

Dual VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics – Includes color recovery – Has EVC video output connector

VISUALIZE-FX4 graphic accelerator board – 24+24/8 bit performance 3D solids – Has EVC video connector – Requires HP-UX 10.20 with ‘Additional Core Enhancements’ (ACE)

VISUALIZE-FX6 graphics accelerator board set – 2-board kit consisting of the geometry accelerator board and the frame buffer board – Requires two adjacent PCI slots

Video output board for VISUALIZE-FX series graphics products only – Provides NTSC, PAL,AND S-VIDEO outputs

Texture memory upgrade for VISUALIZE-FX4 – Adds 16MB texture memory and 32KB x 32KB virtual texture cache

Texture memory upgrade for VISUALIZE-FX4 – Adds 16MB texture memory and 32KB x 32KB virtual texture cache

HP VISUALIZE-fx10 Pro (Revision B) PCI graphics card with 128MB DDR SDRAM memory

HP VISUALIZE-fx2 graphic accelerator board – 24/8 bit accelerated 3D solids – Has EVC video connector – Requires HP-UX 10.20 with ‘Additional Core Enhancements’ (ACE)

HP VISUALIZE-FX4 PCI graphics card

HP VISUALIZE-fx6 advance performance 3D solids PCI graphics card – Requires 2 PCI slots

Texture memory upgrade for VISUALIZE-fx6 – Adds 16MB texture memory and 32KB x 32KB virtual texture cache

EMI clip

EMI clip

Display EMI clip

I/O support cover assembly – ‘Box’ shield on top of the I/O connector board mounting bracket – Includes captive screw

Front cover (bezel) – Large ribbed plastic piece covering the front of the computer – Does NOT include the nameplate

Outer left side panel – New color

Outer right side panel – New color

5.25-inch blank filler panel

PS/2 three-button mouse (Carbonite) – Has 1.8m (6.0 feet) long cable with 6-pin mini-DIN connector

PS2 optical scroll mouse (Jack Black)

PS/2 optical scrolling mouse – Two button mouse with scrolling wheel – Has 1.75m (69in) long cable with 6-pin mini-DIN connector (Option EY703AA)

3-button PS/2 mouse (Titanium Gray) – Has attached cable with 6-pin mini-din connector

Drive module fan assembly – 60mm (2.4in) square

SCSI disk board – Has two 4-pin male power connectors, one 50-pin (M) NSE SCSI connector, one 68-pin (F) ultra wide SCSI connector, and one 4-pin (M) CD-ROM audio connector – Mounts in the peripheral (drive) module assembly

4.0GB Ultra Wide Single-Ended SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high

9.1GB Ultra Wide Single-Ended SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.6-inch high – (Part of A4570A, A4573A)

1.44MB 3.5in Single-Ended SCSI floppy drive

4.0GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor – (Part of A4356A)

12GB/24GB Single-Ended SCSI-2 DDS-3 tape (DAT) drive

650MB Single Ended SCSI-2 CD-ROM drive

1.44MB 3.5-inch Single-Ended SCSI-2 floppy drive

1.44MB 3.5-inch Single-Ended SCSI-2 floppy drive

12x-max speed Single-Ended SCSI-2 CD-ROM drive

9.1GB Ultra Wide Single-Ended SCSI hard disk drive – 7,200 RPM, 3.5-inch form factor, 1.6-inch high

Narrow Single-Ended SCSI-2 slot load DVD-ROM drive – 6X DVD-ROM read, 32X CD-ROM read (Pioneer DVD-303/304) – Has headphone jack and volume control – Replacement for the 4X CD-ROM drives (A4463A and A4325A)

1.44MB, 3.5-inch Single-Ended SCSI floppy drive – (Part of A4283A)

2.0GB Differential Fast Wide SCSI-2 hard drive – 7,200 RPM, 3.5-inch form factor

4.0GB Fast Wide Differential SCSI-2 hard drive – 7,200 RPM, 3.5-inch form factor – (Part of A4477A)

2.0GB Ultra Wide Single-Ended SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high – (Part of A4568A, A4571A)

4.0GB Ultra Wide Single-Ended SCSI hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high – (Part of A4569A, A4572A)

2.0GB Fast Wide Differential SCSI hard drive – 3.5-inch form factor – (Part of A4119A and A4119AR)

9.1GB Differential Fast Wide SCSI-2 hard drive – 7,200 RPM, 3.5-inch form factor – (Part of A4485A)

4GB/8GB Single-Ended SCSI-2 DDS-2 tape (DAT) drive

12GB/24GB Single-Ended SCSI-2 DDS-3 (DAT) tape drive – 5.25-inch form factor – (part of A3542A, A4249A)

4GB/8GB Single-Ended SCSI-2 DDS-2 tape (DAT) drive – (Part of A4467A)

64MB, 50ns, 72-pin EDO DIMM memory module for HP9000 J2240

128MB ECC DIMM memory module for HP9000 J2240

2MB VISUALIZE-EG display memory RAM daughter board

256MB EDO memory upgrade kit – Includes two 128MB, 50nS ECC EDO SIMM modules

512MB ECC memory upgrade kit – Includes two 256MB SIMM modules

256MB ECC DIMM memory module for HP9000 J2240

128MB EDO memory upgrade kit – Includes two 64MB, 50nS ECC EDO SIMM modules

512MB ECC memory upgrade kit – Includes two 256MB DIMM memory modules

HP9000 Workstation 16MB texture memory upgrade – For the VISUALIZE-48XP graphics board – (Part of A4246A and A4247A)

HP9000 J2240 Video out board – Mounted on the VISUALIZE-48XP frame buffer and geometry accelerator board

HP9000 J2240 Texture memory mapping accelerator board – 16MB texture memory and 32KB x 32KB virtual texture cache – For A4553A/B (VISUALIZE-FX4) graphics board – Adds 8 planes

HP9000 J2240 Jumper PCA – Small PCA with 72-PIN female connector

HP9000 J2240 VISUALIZE-48XP geometry accelerator board – (1 of 3 boards in a 2-wide A4246A configuration – 3-wide configurations have 4 or 5 boards)

HP9000 J2240 VISUALIZE-48XP frame buffer board – (1 of 3 boards in a 2-wide A4246A configuration – 3-wide configurations have 4 or 5 boards)

HP9000 Workstation J2240 VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics – Includes color recovery – (Part of A4450A)

HP9000 J2240 Dual VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics – Includes color recovery – (A4451A)

HP9000 J2240 WORKSTATION Motherboard with integrated Wide Single-Ended (WSE) SCSI drive interface – Does NOT include processor modules or memory DIMMs – Main board in the CPU drawer assembly

HP9000 J2240 Motherboard with integrated Fast Wide Differential (FWD) SCSI drive interface – Does NOT include processor modules or memory DIMMs

HP9000 J2240 PCI backplane board – For models with an EISA slot on the PCA backplane – Mounts on the right side of the EISA module assembly

HP9000 Workstation PCI backplane board – For models WITHOUT an EISA slot on the PCA backplane – Mounts on the right side of the EISA module assembly

HP9000 J2240 System backplane board – Mounts in the main chassis assembly

HP9000 J2240 EISA backplane board – Includes the rear panel RS-232C and HP-HIL connectors – Mounts on the right side of the EISA module assembly – for 9000/J282 ONLY

HP9000 J200 VISUALIZE-FX2 graphics board – 1280 × 1024 accelerated 3D solids double-buffered 12-plane color graphics board with 8 overlay planes – (Part of A4552A)

WORKSTATION J2240

HP9000 Workstation VISUALIZE-FX6 graphics accelerator board set – 2-board kit consisting of the geometry accelerator board and the frame buffer board

HP9000 J2240 Video-out board – For A4552A (VISUALIZE-FX2), A4553A/B (VISUALIZE-FX4), or A4554A (VISUALIZE-FX6) graphics boards

Fast Wide Differential SCSI-2 GSC/HSC interface board – (Part of A4107A)

HSC FDDI 1-station or 2-station (single attach or dual attach) LAN adapter – Plugs into GSC slot

Fast/wide SCSI interface board – Plugs into an HSC bus slot

HP9000 J2240 16MB texture memory upgrade with 32KB x 32KB virtual texture cache (A4560A) – For the VISUALIZE-FX6 graphics card

FDDI EISA LAN adapter and license – Plugs into EISA slot

100Base-TX LAN host adapter board with one RJ-45 port – Requires one PCI slot – Includes the board, software, software license, and installation instructions – For HP-UX operating system

8 port RS-232 direct connect MUX system board – Plugs into an EISA bus slot

ATM/155Mbps HP-HSC ATM adapter – Plugs into GSC slot

High speed X.25 board – Provides line speed up to 1.5 Mbps – Plugs into an EISA bus slot

I/O connector board – Includes four 1/8-inch audio jacks, two PS/2 connectors, one parallel, one AUI LAN, and one UTP connectors – Mounts to support bracket on the rear of the computer

Dual port X.25 LAN PSI card – Plugs into EISA slot

HSC 100Base-TX (option 001) or 100Base-FX (option 002) dual port LAN adapter – Plugs into GSC slot

750W power supply module assembly – Does NOT include the extractor – Plugs into the lower right front of the computer

HP PA-RISC processor – 236MHz, PA-8200 processor with 2MB + 2MB I/D cache