Demande de devis pour ce produit





Cliquez pour agrandir

HP 9000 Workstation J7000 4x PA-8500 440MHz

Part number: A4981A

HP9000 J7000 4x PA-8500 440MHz 

TypeImageRéférence DescriptionCotation
KEYBOARD
A4983-60405

USB keyboard with PC-105 layout – Has 2.9m (10ft) cable with type (A) USB connector (Option ABF – European French)


CONVERTER
A4981-86002

DC to DC converter module (1.5in D X 4.63in H X 7.4in W) – 48V DC at 6.3A input, two 2.0V DC at 42A outputs – Plugs into the system processor PC board (two used)


CABLE
5182-1857

Audio cable assembly – For CD-ROM, CD-RW, or DVD-ROM – 4-pin (F) connector to 4-pin (F) connector – 47.8cm (18.8in) long


CABLE
A4978-63004

Ribbon Cable – Data cable for the DDS-3 tape (or floppy) drive and the CD-ROM drive


CABLE
A4978-63005

Drive power cable assembly – Connects from the I/O and PCI backplane PC board assembly to the SCA hard drive interface board, floppy/tape drive bay, and the CD-ROM bay


CABLE
A4978-89005

Flex cable assembly (U-shaped) – From system processor PC board to I/O and PCI backplane board


CABLE
5182-1857

Audio cable assembly – For CD-ROM, CD-RW, or DVD-ROM – 4-pin (F) connector to 4-pin (F) connector – 47.8cm (18.8in) long


CABLE
A4978-63004

Ribbon Cable – Data cable for the DDS-3 tape (or floppy) drive and the CD-ROM drive


CABLE
A4978-63005

Drive power cable assembly – Connects from the I/O and PCI backplane PC board assembly to the SCA hard drive interface board, floppy/tape drive bay, and the CD-ROM bay


CABLE
A4978-63009

Ribbon Cable – Connects between the system processor board and the front panel (For the LCD display and power switch assembly)


CHASSIS
A4978-86007

Chassis assembly for J5×00/J7000 workstations – Includes chassis with side and top panels, all cooling fans, I/O fan and speaker bracket, PCI board retainer clip, drive EMI covers and trays, floppy/CD-ROM drive data and power cables, and bus bar shield


BEZEL
A4978-62004

Front Bezel Assembly – Includes the front plastic cover with the hard drive access door


FAN
A4978-62012

Tubeaxial fan (Panaflo model FBA09A12H) 92mm x 92mm x 25mm thick fan with 22cm long three wire cable – 12VDC nominal operating voltage – For cooling the system processor board – Mounts to the inner fan wall of the chassis (3 used)


FAN
A4978-62012

Tubeaxial fan (Panaflo model FBA09A12H) 92mm x 92mm x 25mm thick fan with 22cm long three wire cable – 12VDC nominal operating voltage – For cooling the system processor board – Mounts to the inner fan wall of the chassis (3 used)


FAN
A4978-86014

Tubeaxial fan kit (Panaflo model FBA12G12H) – 120mm x 120mm x 37mm thick fan with 30cm long 3-wire cable – 12VDC nominal operating voltage – Includes ESD wrist strap and instructions – Mounts in the I/O fan and speaker bracket assembly


FAN
A4978-86014

Tubeaxial fan kit (Panaflo model FBA12G12H) – 120mm x 120mm x 37mm thick fan with 30cm long 3-wire cable – 12VDC nominal operating voltage – Includes ESD wrist strap and instructions – Mounts in the I/O fan and speaker bracket assembly


GRAPHICS
A1299B

HP VISUALIZE-fx10 Pro (Revision B) PCI graphics card with 128MB DDR SDRAM memory


GRAPHICS
A4552A

HP VISUALIZE-fx2 graphic accelerator board – 24/8 bit accelerated 3D solids – Has EVC video connector


GRAPHICS
A4554A

HP VISUALIZE-fx6 advance performance 3D solids PCI graphics card – Requires 2 PCI slots


GRAPHICS
A4556A

Video output board for VISUALIZE-FX series graphics products only – Provides NTSC, PAL,AND S-VIDEO outputs


GRAPHICS
A4560A

Texture memory upgrade for VISUALIZE-fx6 – Adds 16MB texture memory and 32KB x 32KB virtual texture cache


GRAPHICS
A4560A

Texture memory upgrade for VISUALIZE-fx6 – Adds 16MB texture memory and 32KB x 32KB virtual texture cache


GRAPHICS
A4926A

LAN adapter – 1000Base-SX PCI Gigabit Ethernet LAN adapter – Supports all PCI bus configurations


GRAPHICS
A4977A

HP VISUALIZE-EG PCI graphics card with 4MB memory – The EG card is 8 plane with 8 overlay planes – Can be used in either a 3.3V or 5.0V PCI slot


GRAPHICS
A4982B

HP VISUALIZE-fxe PCI graphics card with 9.5MB of texture memory (24MB SDRAM total memory) , 32-bit, 66MHz


GRAPHICS
J3526A

WAN adapter – Four port X.25 frame relay adapter card


GRAPHICS
J3525A

WAN adapter – Two port X.25 PCI frame relay adapter card


MOUSE
395737-001

USB 3-button scrolling mouse (Carbon Black) – Has 2.9m (10ft) cable with type (A) USB connector


MOUSE
395736-001

USB 3-button mouse (Quartz Gray) – Has 2.9m (10ft) cable with type (A) USB connector


DRIVE
A1658-69027

9.1GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST39102LC) – (Part of A4997A)


DRIVE
A1658-69031

18GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST318203LC) – (Part of A4998A)


DRIVE
A1658-69032

36.4GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST336704LC) – (Part of A6031A)


DRIVE
A4997A

9.1GB Ultra2 wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector


DRIVE
A4998A

18GB Ultra2 Wide SCSI LVD hard drive – 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector


DRIVE
A5001A

32x-max CD-ROM drive – Half-height CD-ROM drive with ATAPI IDE connector


DRIVE
A5009A

1.44MB floppy drive – 3.5-inch form factor with IDE PC/AT interface


DRIVE
A5011A

12GB native capacity DDS-3 tape drive – Can store up to 24GB with data compression – Mounts in 3.5 inch drive tray


DRIVE
A6031A

36GB Ultra2 Wide LVD SCSI hard drive – 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector


DRIVE
A7207-69001

73GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector – (Part of A7207A)


DRIVE
A7207A

73GB Ultra2 Wide SCSI LVD hard drive – 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector


DRIVE
A7208-69001

36.4GB hot-plug Wide Ultra2 SCSI Low Voltage Differential (LVD) hard drive – 15,000 RPM, 3.5-inch form factor, 1.0-inch high – (A7208A)


DRIVE
A7208A

36.4GB Ultra2 Wide SCSI LVD hard drive – 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector


DRIVE
A7853A

IDE CD-RW drive – 24X CD-R write, 10X CD-RW rewrite, 40X CD-ROM read


MEMORY
A6016A

1024MB, 120MHz SDRAM DIMM memory module for HP9000 J7000


MEMORY
A6016A

1024MB, 120MHz SDRAM DIMM memory module for HP9000 J7000


MEMORY
A6016A

1024MB, 120MHz SDRAM DIMM memory module for HP9000 J7000


MEMORY
A4994A

256MB, 120MHz SDRAM DIMM memory module for HP9000 J7000


MEMORY
A4994A

256MB, 120MHz SDRAM DIMM memory module for HP9000 J7000


MEMORY
A3863-69001

512MB, 120MHz SDRAM DIMM memory module – (Part of A4995A)


MEMORY
A4995A

512MB, 120MHz SDRAM DIMM memory module for HP9000 J7000


PC BOARD
A4978-69020

HP9000 J7000 I/O and PCI backplane PC board assembly – Mounts in the center left side of the chassis assembly


PC BOARD
A4978-89006

WORKSTATION J7000 SCA hard drive interface backplane PC board assembly – Mounts on the rear of the drive bay assembly


PC BOARD
A4978-69015

HP9000 WORKSTATION J7000 System Processor Board and tray assembly – Includes four 440MHz PA-8500 RISC processors – Mounts in the center left side of the chassis assembly


PC BOARD
A4978-89006

HP9000 WORKSTATION J7000 SCA hard drive interface backplane PC board assembly – Mounts on the rear of the drive bay assembly


INTERFACE
A3739A

FDDI LAN PCI network adapter board


POWER SUPPLY
A4981-69001

Power supply assembly (1350W) – Includes power supply, power supply fans, and power cord and buss bar connectors – Mounts in the rear right corner of the chassis assembly