PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (French)

Fiber optic converter – Converts from SC duplex plug to 2.5mm bay

Cable guide kit

Power supply interface cable (module) assembly – Includes the dual power supply interface connector, the low voltage cables, and the two internal power cables terminated with line filter/power recptacle assemblies

X.21 interface cable

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC and SC connectors – 2m (6.6ft) long

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 2m (6.6ft) long

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 50m (164ft) long

VGA monitor cable

DDR 4X copper cable – 10.0m (33.3ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin very high density (M) to 68-pin very high density (M) – 128 ohms – 2.0m (6.6ft) long

Multimode Fiber (MMF) optic, LC (Lucent connector) cable – 200m (656.1ft) long

Multimode Fiber (MMF) optic, LC (Lucent connector) cable – 2m (6.6ft) long

V.35 DTE cable loopback hood

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 200m (656ft) long

Management processor M-cable

Management processor M-cable

Management processor M-cable

Single channel internal SCSI cable

Dual channel internal SCSI cable – Includes two cables

Y-cable assembly for super-80mm fan – 6-wire (three per connector) fan cable

Y-cable assembly for super-80mm fan – 6-wire (three per connector) fan cable

Y-cable assembly for 80mm fan – 12-wire (three per connector) fan cable

Flex cable – For the management processor card

SCSI cable A-channel – Has one connector at each end

Serial cable

InfiniBand 4X PCI-X fabric copper cable – 7.0m (22.9ft) long

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 2m (6.6ft) long

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 16m (52ft) long

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 50m (164ft) long

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 200m (656ft) long

Fiber-optic short wave multimode interface cable kit – Has a dual female SC adapter and a 50um core, 125um cladding, 2m (6.6ft) long interface cable with LC and SC connectors

Mux fanout cable with 8 RJ45 RS-232 connectors

V.35 interface cable

RS-232 interface cable

RS-499 interface cable

X.21 interface cable

V.35 interface cable

RS-530 interface cable

Data cable – For IDE CD-ROM/DVD drive

PCI-X copper cable for 4X InfiniBand – 10.0m (32.8ft) long

Right side bezel (Graphite) – For rack mount configuration

Left side bezel with rack latch – For rack mount configuration

Standard 80mm fan

CPU/Chassis fan

CPU/Chassis fan

Thin 80mm fan

Rack mount kit

PCI-X 12-port 4X InfiniBand copper switch – Includes the switch, a rack mount kit, and a cable guide kit

PCI-X to Fibre Channel Host Bus Adapter (HBA) – 2GB/s, 133MHz, 64-bit, single channel – For use with 32-bit servers running Windows 2000 SP4 or Windows Server 2003

2.0GB dual-channel 64 bit 133MHz PCI-X to Fiber Channel (FC) Host Bus Adapter (HBA) for Windows – Has up to 400MB/s transfer rate

InfiniBand 4X PCI-X dual-port Host Channel Adapter (HCA)

Adapter for fiber-optic short wave multimode interface cable – 50um core, 125um cladding – Female SC connectors

Ultra3 SCSI adapter – 64-Bit, 66MHz, single channel, with PCI bus (Option A6828A)

Ultra320 SCSI Host Bus Adapter (HBA) – 64-Bit/133-MHz, dual channel, PCI-X interface (Option A7173A)

2GB 1000BASE-SX Fiber Channel (FC) PCI-X Windows/Linux dual-port adapter

Ultra320 SCSI Host Bus Adapter (HBA) – 64-Bit/133-MHz, dual channel, PCI-X interface

HP PCI-X 2-port 4X Fabric (DB) adapter for HP-UX (Option AB345A)

HP PCI-X 2-port 4X Fabric (DB) adapter for HP-UX (Option AB345A)

PCI-X 133MHz 10GB Ethernet SR Fiber Channel (FC) adapter – Has two duplex LC connectors, one for transmit, one for receive function

PCI-X 133MHz 10GB Ethernet SR Fiber Channel (FC) adapter – Has two duplex LC connectors, one for transmit, one for receive function

ECI cover plate – Gray metal plate approximately 1.0-inches wide by 6.75-inches long

RS449 loopback hood

HyperFabric (HF2) loopback hood

Side cover (metallic alloy) – For deskside configuration

Main cover (Carbon Black) – Metal cover with blue-colored release handle

Cover kit (unpainted) – Includes top cover and two side covers

ISO2110 (RS232 / RS530) loopback hood

IBM X.21 loopback hood

USB scrolling mouse (Carbonite black) – Two button mouse with scrolling wheel – Has 1.8m (72in) long USB cable

Main airflow guide (plastic)

Memory airflow guide (plastic)

Fan cage assembly (metal) – Front half of the processor airflow system

Hot-swap hard drive slot filler panel (Carbon Black)

Slimline optical drive bay filler panel (Carbon Black plastic)

Narrow Single-Ended SCSI-2 slot load DVD-ROM drive – 6X DVD-ROM read, 32X CD-ROM read (Pioneer DVD-303/304) – Has headphone jack and volume control

Hard drive power cable

36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

73GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

Slimline DVD-ROM drive (Carbon Black) – 8X read DVD-ROM, 24X read CD-ROM

Slimline DVD-ROM drive (required for Windows orders) – 8X DVD-ROM, 24X CD-ROM

DVD+RW CDR/RW-ROM combo Slimline Carbonite) optical drive

Slimline DVD+RW combo drive

36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

73GB hot-plug Ultra320 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

300GB SCSI hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

300.0GB Ultra320 SCSI hard disk drive – 10,000 RPM, low-end

256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module for HP RX2620 1.4GHZ

256MB battery backed write cache (BBWC) memory board – 72-bit, DDR – Includes battery

512MB battery backed write cache (BBWC) memory board – 72-bit, DDR – Includes battery

2.0GB, 266MHz, PC2100, registered ECC, DDR SDRAM, DIMM memory module for HP RX2620 1.4GHz

512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module for HP RX2620 1.4GHZ

1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module for HP RX2620 1.4GHZ

1GB, PC2100 DDR-SDRAM quad memory module (four 256MB 1.2-inch DIMMs) for HP RX2620 1.4GHz

2GB, PC2100 DDR-SDRAM quad memory module (four 512MB 1.2-inch DIMMs) for HP RX2620 1.4GHz

4GB, PC2100 DDR-SDRAM quad memory module (four 1GB 1.2-inch DIMMs) for HP RX2620 1.4GHz

16.0GB PC2100 DDR-SDRAM memory quad (4×4.0GB DIMMs)

128MB battery backed write cache (BBWC) memory board – 72-bit, DDR memory

4.0GB PC2100 DDR-SDRAM DIMM – Includes 4×1GB DIMMs

HP RX2620 PCI/PCI-X 2GB Fiber Channel (FC)/1000Base-SX adapter card combo

HP RX2620 2GB dual-channel PCI-X Fiber Channel (FC) 1000Base-T Host Bus Adapter (HBA) board combo

HP RX2620 HP Management CPU card with VGA

HP RX2620 2-channel PCI-X RAID Smart Array 6402/128 U320 controller board – For Linux, Windows – Order 309520-001

HP RX2620 Ultra320 SCSI PCI-X RAID smart array controller – 256MB cache memory, 64-bit, 133MHz, 31.2 × 10.7 × 1.8cm (12.3 × 4.2 x .7in)

System board – For use with the rx2620

HP RX2620 Management processor board – For controlling the system console, reset and power management functions – Includes SIO (remote, console and UPS), VGA and LAN connectors

HP RX2620 PCI backplane/riser board – Has four PCI slots

HP RX2620 SCSI backplane board – Has three connectors for hot-swap hard drives

HP RX2620 ATI Radeon 7000 PCI graphic adapter board – Single 32–bit expansion-slot, 66/33MHz Universal PCI, 2D graphics acceleration, and capable of 24-bit true color resolution at 2048 × 2048

HP RX2620 PCI 2.0GB Fiber Channel (FC) Host Bus Adapter (HBA)

Dual port 10Base-T/100Base-TX LAN and dual port Ultra2 low voltage differential/single-ended (LVD/SE) SCSI adapter – Has two RJ-45 LAN ports and two external 68-PIN very high density connectors

PCI 1000Base-T Ethernet network (LAN) adapter card – One port

Dual channel Ultra320 SCSI PC board – Optional daughter board which adds two more channels to Smart Array 6402 controller – Replacement for Smart Array 6404 daughter board

InfiniBand (IB) Host Channel Adapter (HCA) 4X SDR PCI-X dual-port module card

FDDI LAN PCI network adaptor board

Dual fiber distributed data interface (FDDI) adapter – Has a dual-attach connection to a FDDI – With two SC duplex-style keyed connectors

100Base-TX PCI LAN adapter with one RJ-45 port

155Mb/s ATM PCI LAN adapter with MMF connectors

155Mb/s ATM PCI LAN adapter with MMF connectors

Token ring (IEEE 802.5 networks) 4/16/32Mbs network interface board

Token ring (IEEE 802.5 networks) 4/16/32Mbs network interface board

Dual port 10Base-T/100Base-TX LAN and dual port Ultra2 Low Voltage Differential/Single-Ended (LVD/SE) SCSI adapter – Has two RJ-45 LAN ports and two external 68-pin very high density connectors

HyperFabric2 PCI 4X fiber adapter – Includes interface and switch

HyperFabric (HF2) PCI 4X fiber adapter card – Includes interface and switch

HyperFabric2 PCI 4X fiber adapter interface and switch – For HP-UX operating system

HP 8-port MUX PCI Multiplexer interface board

HP 8-port MUX PCI Multiplexer interface board – Speeds up to 230,400 bps per port, 33MHz bus speed – Occupies one PCI slot – For HP-UX operating system

HP 8-port MUX PCI Multiplexer interface board – Speeds up to 230,400 bps per port, 33MHz bus speed – Occupies one PCI slot – For HP-UX operating system

HP 64-port MUX PCI Multiplexer interface board

HP 64-port MUX PCI Multiplexer interface board

2Gbps Tachyon XL2 PCI Fibre Channel adapter – Short wave fibre channel optical gigabit interface converter (GBIC)

2Gbps Tachyon XL2 PCI Fiber Channel adapter – For HP-UX operating system – Single channel, short wave, 64-bit, 66MHz PCI – Has LC connectors

1000Base-T Gigabit Ethernet network interface adapter board – Has one RJ-45 connector, requires one 64-bit PCI slot

1000Base-T Gigabit Ethernet network interface adapter board – Has one RJ-45 connector, requires one 64-bit PCI slot – For HP-UX operating system

2Gbps Fiber Channel host bus adapter – For 64-bit Linux and HP-UX – Dual channel, short wave, 64-bit, 133MHz PCI-X – Has LC connectors

2Gbps Fiber Channel host bus adapter – For 64-bit Linux and HP-UX – Dual channel, short wave, 64-bit, 133MHz PCI-X – Has LC connectors

2Gbps Fiber Channel host bus adapter – For 64-bit Linux and HP-UX – Dual channel, short wave, 64-bit, 133MHz PCI-X – Has LC connectors

Single channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 15 devices – Has one 68-pin very high density external connector, and one 68-pin high density internal connector – For HP-UX operating system

Dual channel Ultra160 LVD SCSI adapter board – Supports up to 30 devices – Has two 68-pin very high density external connectors and two 68-pin high density internal connectors – Requires one 64-bit PCI slot (Option A6829A)

Dual channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 30 devices – Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors – For HP-UX operating system

1000Base-SX Gigabit Ethernet network interface adapter board – Has one duplex fiber optic connector, requires one 64-bit PCI slot – For HP-UX operating system

1000 Base-T Gigabit PCI-X Ethernet network interface adapter board – Has two RJ-45 network ports requires one 64-bit PCI-X slot

1000Base-T Gigabit PCI-X Ethernet network interface adapter board – Has two RJ-45 network ports, requires one 64-bit PCI-X slot – For HP-UX operating system

Single channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 15 devices – Has one 68-pin very high density external connector, and one 68-pin high density internal connector – For Windows or Linux operating systems

Dual channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 30 devices – Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors – For Windows and Linux operating systems

Single channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 15 devices – Has one 68-pin very high density external connector, and one 68-pin high density internal connector – For Windows or Linux operating systems

1000 Base-T Gigabit Ethernet network interface adapter board – Has one RJ-45 connector, requires one PCI slot – For Windows and Linux operating systems

1000Base-SX and 2Gbps Fibre Channel Host Bus Adapter – For HP-UX – Dual channel, short wave, 64-bit, 3.3V, 133MHz PCI-X – Has LC connectors

Smart Array 6402 Ultra320 SCSI RAID controller – 64-bit, 133MHz PCI-X interface – Two internal or two external Ultra320 SCSI channels and 128MB of battery-backed memory

1000Base-SX Gigabit PCI-X Ethernet network interface adapter board – Has one duplex fiber optic connector, requires one 64-bit PCI-X slot – For Linux and Windows operating systems

1000Base-T Gigabit PCI-X Ethernet network interface adapter board – Has two RJ-45 connectors, requires one 64-bit PCI-X slot – For Linux and Windows operating systems

2-port InfiniBand host channel adapter, PCI-X – For the HP-UX operating system

HP PCI-X 133MHz 10GbE SR Fiber Adapter

Dual port 10Base-T/100Base-TX LAN and dual port Ultra2 low voltage differential/single-ended (LVD/SE) SCSI adapter – Has two RJ-45 LAN ports and two external 68-PIN very high density connectors

12-port InfiniBand copper switch, PCI-X

2Gb PCI-X-to-Fibre Channel Host Bus Adapter (HBA) – dual channel, 64-bit, 133 MHz

2Gb PCI-X-to-Fibre Channel Host Bus Adapter (HBA) – Single channel, 64-bit, 133 MHz

1000Base-TX LAN four port host adapter board – Supports all PCI bus configurations – Has four RJ-45 connectors – Requires one PCI slot – For HP-UX operating system

PCI-X 10/100/1000 four-port ­copper (1000Base-T) Gigabit Ethernet Adapter – Supports IEEE 802.3ab standard for Gigabit Ethernet, primary bus runs at a maximum of 133 MHz

100Base-TX LAN host adapter board with one RJ-45 port – Requires one PCI slot – Includes the board, software, software license, and installation instructions – For HP-UX operating system

WAN adapter – Dual port X.25 PCI frame relay adapter card

WAN adapter – Two port X.25 PCI frame relay adapter card

100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) – Has four RJ-45 connectors – Require one 64-bit PCI slot – For HP-UX operating system

1000 Base-SX Gigabit Ethernet network interface adapter board – Has one duplex fiber optic connector, requires one PCI slot

2.0GB dual-port 64-bit PCI-X to Fiber Channel (FC) high-performance Direct Memory Access (DMA) bus master host adapter

Hot-swap redundant power supply – 650W