USB keyboard and mouse kit – Includes USB Windows 104/105-key keyboard (Carbon black) and USB two-button scrolling mouse (Carbon black)

Integrated USB Keyboard and Mouse Kit

Management processor M-cable

Management processor M-cable

Power supply interface cable (module) assembly – Includes the dual power supply interface connector, the low voltage cables, and the two internal power cables terminated with line filter/power recptacle assemblies

Power supply interface cable (module) assembly – Includes the dual power supply interface connector, the low voltage cables, and the two internal power cables terminated with line filter/power recptacle assemblies

Data cable – For IDE CD-ROM/DVD drive

Data cable – For IDE CD-ROM/DVD drive

Status panel cable

Hard drive power cable

SCSI cable A-channel – Has one connector at each end

SCSI cable B-channel – Has one connector at each end

Internal smart array cable

X.21 interface cable

V.35 interface cable

RS-232 interface cable

RS-499 interface cable

X.21 interface cable

V.35 interface cable

RS-530 interface cable

Right side bezel (Graphite) – For rack mount configuration

Left side bezel with rack latch – For rack mount configuration

Thin 80mm fan

Thin 80mm fan

Thin 80mm fan

CPU/Chassis fan

CPU/Chassis fan

Rackmount installation kit – Used in cabinets with 48.26cm (19in) width and 1.25m (4.1ft), 1.6m (5.25ft), or 2m (6.56ft) height

Telco style rack mounting kit (needed for field integration into 2-post EIA racks)

Rack mount kit (needed for field integration into 19-inch wide cabinets) – Includes rails and bezel

Rack shelf kit – required to reinforce rack for all factory racked shipments – One shelf kit needed per every 20 servers in the rack and one per every gap in the rack

Ultra320 SCSI Host Bus Adapter (HBA) – 64-Bit/133-MHz, dual channel, PCI-X interface

USB to 2-port PS/2 adapter – For converting one or two PS/2 devices to USB – For USB only systems running HP-UX 10.20 or later – One type ‘A’ male USB connector to two 6-pin mini-DIN connectors, 38.1cm (15in) long cable

Main cover (Carbon Black) – Metal cover with blue-colored release handle

Cover kit (unpainted) – Includes top cover and two side covers

36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

73GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

73GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

Slimline DVD-ROM drive (required for Windows orders) – 8X DVD-ROM, 24X CD-ROM

Slimline DVD+RW combo drive

36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

300GB SCSI hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

1GB, PC2100 DDR-SDRAM quad memory module (four 256MB 1.2-inch DIMMs) for

2GB, PC2100 DDR-SDRAM quad memory module (four 256MB 1.2-inch DIMMs) for

4GB, PC2100 DDR-SDRAM quad memory module (four 256MB 1.2-inch DIMMs) for

HP RX2620 ATI RADEON 7500 graphics controller – 64MB DDR SDRAM memory, 350MHz RAMDAC

HP RX2620 HP Management CPU card with VGA

HP RX2620 Ultra320 SCSI PCI-X RAID smart array controller – 256MB cache memory, 64-bit, 133MHz, 31.2 × 10.7 × 1.8cm (12.3 × 4.2 x .7in)

System board – For use with the rx2620

HP RX2620HP Integrated Lights-Out (iLO) advanced remote management

HP RX2620 Management processor board – For controlling the system console, reset and power management functions – Includes SIO (remote, console and UPS), VGA and LAN connectors

HP RX2620 PCI backplane/riser board – Has four PCI slots

HP RX26200 SCSI backplane board – Has three connectors for hot-swap hard drives

Dual fiber distributed data interface (FDDI) adapter – Has a dual-attach connection to a FDDI – With two SC duplex-style keyed connectors

100Base-TX PCI LAN adapter with one RJ-45 port

100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) – Has four RJ-45 connectors – Require one 64-bit PCI slot – For HP-UX operating system

155Mb/s ATM PCI LAN adapter with MMF connectors

Token ring (IEEE 802.5 networks) 4/16/32Mbs network interface board

Dual port 10Base-T/100Base-TX LAN and dual port Ultra2 low voltage differential/single-ended (LVD/SE) SCSI adapter – Has two RJ-45 LAN ports and two external 68-PIN very high density connectors

Dual port 10Base-T/100Base-TX LAN and dual port Ultra2 Low Voltage Differential/Single-Ended (LVD/SE) SCSI adapter – Has two RJ-45 LAN ports and two external 68-pin very high density connectors

HP 8-port MUX PCI Multiplexer interface board – Speeds up to 230,400 bps per port, 33MHz bus speed – Occupies one PCI slot – For HP-UX operating system

HP 64-port MUX PCI Multiplexer interface board

2Gbps Tachyon XL2 PCI Fiber Channel adapter – For HP-UX operating system – Single channel, short wave, 64-bit, 66MHz PCI – Has LC connectors

1000Base-T Gigabit Ethernet network interface adapter board – Has one RJ-45 connector, requires one 64-bit PCI slot – For HP-UX operating system

2Gbps Fiber Channel host bus adapter – For 64-bit Linux and HP-UX – Dual channel, short wave, 64-bit, 133MHz PCI-X – Has LC connectors

Single channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 15 devices – Has one 68-pin very high density external connector, and one 68-pin high density internal connector – For HP-UX operating system

Dual channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 30 devices – Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors – For HP-UX operating system

1000Base-SX Gigabit Ethernet network interface adapter board – Has one duplex fiber optic connector, requires one 64-bit PCI slot – For HP-UX operating system

1000Base-T Gigabit PCI-X Ethernet network interface adapter board – Has two RJ-45 network ports, requires one 64-bit PCI-X slot – For HP-UX operating system

Single channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 15 devices – Has one 68-pin very high density external connector, and one 68-pin high density internal connector – For Windows or Linux operating systems

Dual channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 30 devices – Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors – For Windows and Linux operating systems

1000 Base-T Gigabit Ethernet network interface adapter board – Has one RJ-45 connector, requires one PCI slot – For Windows and Linux operating systems

1000 Base-SX Gigabit Ethernet network interface adapter board – Has one duplex fiber optic connector, requires one PCI slot – For Windows and Linux operating systems

1000Base-SX and 2Gbps Fibre Channel Host Bus Adapter – For HP-UX – Dual channel, short wave, 64-bit, 3.3V, 133MHz PCI-X – Has LC connectors

1000Base-T and 2Gbps Fibre Channel Host Bus Adapter – For HP-UX – Dual channel, copper and short wave, 64-bit, 3.3V, 133MHz PCI-X – Has LC and RJ-45 connectors

Smart Array 6402 Ultra320 SCSI RAID controller – 64-bit, 133MHz PCI-X interface – Two internal or two external Ultra320 SCSI channels and 128MB of battery-backed memory

1000Base-SX Gigabit PCI-X Ethernet network interface adapter board – Has one duplex fiber optic connector, requires one 64-bit PCI-X slot – For Linux and Windows operating systems

1000Base-T Gigabit PCI-X Ethernet network interface adapter board – Has two RJ-45 connectors, requires one 64-bit PCI-X slot – For Linux and Windows operating systems

Dual port 10Base-T/100Base-TX LAN and dual port Ultra2 low voltage differential/single-ended (LVD/SE) SCSI adapter – Has two RJ-45 LAN ports and two external 68-PIN very high density connectors

2Gb PCI-X-to-Fibre Channel Host Bus Adapter (HBA) – dual channel, 64-bit, 133 MHz

2Gb PCI-X-to-Fibre Channel Host Bus Adapter (HBA) – Single channel, 64-bit, 133 MHz

1000Base-TX LAN four port host adapter board – Supports all PCI bus configurations – Has four RJ-45 connectors – Requires one PCI slot – For HP-UX operating system

WAN adapter – Two port X.25 PCI frame relay adapter card

Hot-swap redundant power supply – 650W

Intel Itanium II processor – 1.6GHz (Madison 9M, 6MB level 3 cache, 400MHz)

Intel Itanium II processor – 1.6GHz(Madison 9M, 3MB level 3 cache, 400MHz)

Intel Itanium II processor – 1.3GHz(Madison 9M, 3MB level 3 cache, 400MHz)