Power cable – 20-pin (F) connector marked ‘BP1’ to 20-pin (F) connector marked ‘P1’ – 31.8cm (12.5in) long

Console switch cable – One cable used for each port – 2.4m (8ft) long – From the J1473A or J1474A Console switch to the computer

Ribbon cable – 4-pin (F) connector to 3-pin (F) connector – 27.9cm (11in) long – From remote control card to I/O baseboard

Ultra2 SCSI/Low Voltage Differential (LVD) SCSI ribbon cable kit – One cable clamp and one cable – One 68-pin (M) connector on each end – 96.5cm (38in) long

Ultra2 LVD SCSI ribbon cable – 68-pin (M) connector marked ‘P2’ to very high density 68-pin (F) connector marked ‘P1’ with thumbscrews for connecting to external storage systems – 25.7cm (10.1in) long

Floppy disk drive ribbon cable – 34-pin (F) connector marked ‘to I/O board’ to 34-pin (F) connector marked ‘to P-Bay backplane’ – 54cm (21.3in) long – Long cable from the 3.5-inch floppy drive to the FDD connector on the I/O baseboard

IDE disk drive ribbon cable – 40-pin (F) connector marked ‘to system board’ to 40-pin (F) connector – 53.6cm (21.1in) long – Long cable from the IDE drive to the IDE connector on the I/O baseboard

Ultra2 LVDS SCSI ribbon cable (C15) – Cable is marked ‘PCI board to MS cage C15-90 ohm’ – 68-pin (M) connector to 68-pin (M) connector – 17.5cm (6.9in) long

IDE disk drive ribbon cable – Short cable from the IDE drive to the IDE connector on the I/O baseboard

Ribbon cable – 26-pin (M) edge connector marked ‘PCB’ to 26-pin (M) edge connector marked ‘Floppy’ – 21cm (8.3in) long – Short cable from the 3.5-inch floppy drive to the FDD connector on the I/O baseboard

SCSI ribbon cable kit (C15) – Includes a 68-pin (F) to 50-pin (F) adapter and a terminated cable marked ‘PCI board to MS Cage C15-90 ohm’ – 68-pin (M) connector to 68-pin (M) connector – 21.3cm (8.4in) long – For SCSI DDS (DAT) tape drive

Power cable – A 10-pin (F) connector to both a 48cm (18.9in) cable with a 4-pin (F) connector and a 17.5cm (6.9in) cable with a 6-pin (F) connector – For hot-swap cage

I2C bus cable assembly – Has 3-pin (F) connectors on each end – 21.4cm (8.4in) long – From system I/O baseboard to hot-swap backplane board

SCSI interface cable with thumbscrews on both ends – Highly flexible 68-pin high density (M) to 68-pin high density (M) – 90 Ohms – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – Highly flexible 68-pin ultra high density (M) to 68-pin high density (M) – 90 ohms – 2.5m (8.2ft) long

NetRAID controller to Rack Storage/8 cable kit – Includes a 68-pin cable from third channel of D4943A controller to rear panel and a 2.5m (8.2ft) 68-pin high density cable with thumbscrews

SCSI interface cable – Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends – 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

Optical short-wave fiber channel cable – Includes two short-wave optical fiber Gigabit interface converters – 3m (9.8ft) long

Optical short-wave fiber channel cable – Includes two short-wave optical fiber Gigabit interface converters – 5m (16ft) long

Optical short-wave fiber channel cable – Includes two short-wave optical fiber Gigabit interface converters – 50m (164ft) long

Optical short-wave fiber channel cable – Includes two short-wave optical fiber Gigabit interface converters – 100m (328ft) long

SCSI interface cable – Highly flexible 68 pin high density (M) to 68 pin ultra high density (M) with offset connector – 5.0m (16ft) long

SCSI interface cable – Highly flexible 68 pin high density (M) to 68 pin ultra high density (M) with offset connector – 10.0m (33ft) long

Optical short-wave fiber channel cable – Includes two short-wave optical fiber Gigabit interface converters – 10m (33ft) long

SCSI interface cable – Highly flexible 68 pin high density (M) to 68 pin ultra high density (M) with offset connector – 1.0m (3.3ft) long

Console switch cable – One cable used for each port – 2.4m (8ft) long – From the J1473A or J1474A Console switch to the computer

Console switch cable – One cable used for each port – 4.6m (15ft) long – From the J1473A or J1474A Console switch to the computer

Console switch cable – One cable used for each port – 4.6m (15ft) long – From the J1473A or J1474A Console switch to the computer

Front bezel kit – Comes with the LXr 8000 front bezel, hinge, latch, and hardware

Front panel display bezel – Mounts to the front of the server – Includes LCD

Redundant hot-swap tubeaxial fan – Mounts in the fan cage

Rack mount kit for LXr8000 NetServer – Includes rack mount rails – Rails mount on side of chassis

Rack mount kit – Used to mount 1 or 2 DLT 418/718/818 autoloaders in HP 19-inch racks – Includes shelf, bezel, filler panel, and hardware

Rack mount kit – Used to mount 1 or 2 DLT 418/718/818 autoloaders in HP 19-inch racks – Includes shelf, bezel, filler panel, and hardware

Universal monitor rack mount kit – For any monitor up to 19-inch and 100 pounds – Quartz Gray

Universal monitor rack mount kit (Quartz Gray) – For any monitor up to 19-inch (max height 46cm (18.1-inches)) and 100 pounds

4-port Console Switch – Connect up to four computers to a single monitor, keyboard, and mouse – Includes rack mounting hardware – Must order connecting cables separately

8-port Console Switch – Connect up to eight computers to a single monitor, keyboard, and mouse – Includes rack mounting hardware – Must order connecting cables separately

Top cover assembly – Includes top cover and PCI hot plug access panel

Fan bay cover assembly – Covers the hot swap fan bay

Side cover kit for Rack System/E41 Cabinet – Includes eight 8U panels and two 9U panels – Panels are snap on/off molded plastic

Side cover kit for Rack System/E33 or U33 Cabinet – Includes six 8U panels and two 9U panels – Panels are snap on/off molded plastic

Side cover kit – Includes four 8U panels and two 9U panels – Panels are snap on/off molded plastic – For Rack System/E25 or U25 Cabinet

1U rackmount filler panels – For covering the empty slots on the front of the rack cabinet – Package of 6 panels

2 button PS/2 serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-din connector

NetServer Rack Storage 12/FC – Fiber channel mass storage enclosure – Can hold 8 or 12 Ultra2 SCSI drives – Includes one copper fiber channel cable and one copper GBIC

Rackmount AutoRAID Array Model 12H – Includes two controller slots, three fans, two power supplies, 12 disk slots, and Fast Wide Differential SCSI terminator

Rackmount AutoRAID Array Model 12H – Includes two controller slots, three fans, two power supplies, 12 disk slots, and Fast Wide Differential SCSI terminator

SureStore H/A tape array 5500 – Rack mount enclosure for up to five DLT80m DLT drives – With rail kit, install guide, users manual, two power cables, and four 0.5m (1.6ft) long SCSI cables

SureStore H/A tape array 5500 – Rack mount enclosure for up to five DLT80m DLT drives – With rail kit, install guide, users manual, two power cables, and four 0.5m (1.6ft) long SCSI cables

HP SureStore Tape Rack Array – Includes rack mount enclosure for up to four removable drives, with rail kit, install guide, users manual, four power cables, two 2.5M (8.2ft) & one 0.9M (3.0ft) SCSI cable

NetServer Storage System/6 – External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules – Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s

NetServer Rack Storage System/8 – Rack mounted cabinet which can hold up to eight hot-swap drive modules – Includes rack optimized storage cabinet (3U high) with eight hot pluggable bays, dual SCSI backplane, redundant hot swap power supply, and fans

NetServer Storage System/12 – External cabinet which can hold eight half height, or 12 low profile Ultra2 SCSI drives – Includes one Rack Storage 12 Ultra160 SCSI card

9.1GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6106A)

20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive

24GB internal SureStore DAT 24i Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive (Flint)

24GB SureStore DAT 24i Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive

20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive

SureStore 7115WE 15 slot DLT library – Includes one Fast Wide SCSI DLT 7000 drive, cosmetic panels, three magazines, barcode reader, and accessories

SureStore 7215we 15 slot DLT library – Includes two Fast Wide SCSI DLT 7000 drives, cosmetic panels, three magazines, barcode reader, and accessories

SureStore DLT library 4115wr 15 slot rack mount tape library – Includes one Fast Wide SCSI DLT 4000 drive, rack slides, three magazines, barcode reader, and accessories

SureStore DLT library 7115wr 15 slot rack mount tape library – Includes one Fast Wide SCSI DLT 7000 drive, rack slides, 3 magazines, barcode reader, and accessories

SureStore DLT library 4215wr 15 slot rack mount tape library – Includes two Fast Wide SCSI DLT 4000 drives, rack slides, three magazines, barcode reader, and accessories

SureStore DLT library 7215wr 15 slot rack mount tape library – Includes two Fast Wide SCSI DLT 7000 drives, rack slides, three magazines, barcode reader, and accessories

SureStore 4228w 28 slot DLT library with multiple Wide Differential SCSI buses – Includes two DLT 4000 drives

SureStore 7228w 28 slot DLT library with multiple Wide Differential SCSI buses – Includes two DLT 7000 drives

SureStore 4448w 48 slot DLT library with multiple Wide Differential SCSI buses – Includes four DLT 4000 drives

SureStore 7448w 48 slot DLT library with multiple Wide Differential SCSI buses – Includes four DLT 7000 drives

70GB SureStore DLT 70e Single-Ended Wide SCSI-2 external DLT drive

40GB hot-swap SureStore DLT70r removable DLT drive – Includes manuals, DLT tape IV media, and cleaning cartridge

20/40GB hot-swap SureStore DLT40r removable DLT drive – Includes manuals, software on a CD-ROM, DLT tape IV media, and cleaning cartridge

80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive

SureStore 418 8 slot DLT autoloader – Includes one Ultra SCSI DLT 4000 drive, six cartridge magazines, SCSI cable and terminator, and five data cartridges

4.2GB Wide Single-Ended SCSI hard drive – 7,200 RPM

9.1GB Ultra Wide SCSI hard drive module – 7,200 RPM

1.44MB, 3.5-inch floppy drive with bezel

IDE slimline CD-ROM drive – 24X CD-ROM read

4.2GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM

4.2GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM, low profile

9.1GB ‘hot swap’ Ultra2 SCSI hard drive module – 7200 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer

9.1GB hot-swap Ultra2 SCSI hard drive module – 10,000 RPM, low profile – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D6107A)

9.1GB ‘hot swap’ Ultra2 SCSI hard drive module – 10000 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer

18GB ‘hot swap’ Ultra2 SCSI hard drive module – 7200 RPM, low profile – Includes drive, hot swap tray, SCA extender, and bezel spacer

18GB hot-swap Ultra2 SCSI hard drive module – 7,200 RPM – Includes drive, hot-swap tray, SCA extender, and bezel spacer – (D7174A)

80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive

256MB, 50nS EDO DIMM memory module for HP LXr8000 NetServer

64MB, 50nS EDO DIMM memory module for HP LXr8000

256MB memory upgrade kit – Includes four 64MB, 50nS, buffered ECC EDO DIMMs – For NetServer LXr8000 and LH4

1GB memory upgrade kit – Includes four 256MB, 50nS, buffered ECC EDO DIMMs – For NetServer LXr8000 and LH4

64MB SIMM memory module for NetRAID 3Si disk array controller – (D7132A)

HP LXr8000 NetServer Hot Swap’ SCSI Backplane Board – for the ‘Hot Swap’ SCSI Drives – Mounts in the Rear of the ‘Hot Swap’ Drive Cage

HP LXr8000 NetServer Peripheral Bay Interconnect Board – Mounts Behind the Peripheral Bay on the Bottom Left Side of the Chassis

HP LXr8000 NetServer I/O board – Contains 1 ISA/PCI, 5 PCI, and 4 64-BIT hot plug PCI accessory card slots

HP LXr8000 Front Panel Control Board with LCD Display Assembly

HP LXR8000 SCSI Management Board – Manages SCSI Drive Activity – Plugs Into the Hot Swap SCSI Backplane Board

HP LXr8000 Peripheral Bay Backplane – Mounts behind the Peripheral Bay Drives – Has Connectors for Internal Drives

HP LXr8000 I/O Riser Board – Has Muticolored Ports for Video, Mouse, and Keyboard – Plugs into I/O Riser Port on I/O Board

HP LXr8000 NetServer Mid-Plane PC Board – Board That Connects the I/O Board, Memory Boards, and the Processor Baseboard – Mounts Vertically in the Center of the Chassis

HP LXr8000 Memory board – Has 16 slots for DIMMs – DIMMs must be installed four at a time

HP LXr8000 NetServer Processor baseboard – Holds up to four processors with VRM’S

HP LXr8000 NetServer Remote Control Board with 4 Pin I2C Cable (D6028A)

NetRAID-3si three-channel disk array controller – PCI board with three internal 68 pin high density and three external 68 pin high density Ultra wide SCSI connectors

NetRaid-1Si one-channel disk array controller – PCI board with one internal 68-pin High Density and one external 68-pin Ultra High Density SCSI connector – NetRAID-1Si One-Channel Disk Array Controller – PCI Board with One Internal 68 Pin High Density and

NetRAID-1 one-channel disk array controller – PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector

PCI 10Base-T/100Base-TX LAN board – LAN Adapter – PCI 10/100TX LAN Board for NetServer

Wide SCSI Host Adapter Board (D5025A) – Installed in PCI Socket on System Backplane Board

PCI Wide SCSI host adapter board – Wide SCSI Host Adapter Board – Installed in PCI Socket on System Backplane Board – May Need Cables D5968A and D6001A

NetServer fiber channel array – Redundant, dual ported fiber channel connection from host to the NetServer includes three 3M copper fiber channel cables and three copper GBIC

NetRaid-4M four-channel disk array controller W/64MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-4m four-channel disk array controller with 64MB cache – PCI board with two internal 68 pin high density and four external 68 pin very high density Ultra3 SCSI connectors – NetRAID-4M Four-Channel Disk Array Controller W/64MB Cache – PCI Board With

NetRaid-4M four-channel disk array controller W/128MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-4m four-channel disk array controller with 128MB cache – PCI board with two internal 68 pin high density and four external 68 pin very high density Ultra3 SCSI connectors

PCI 32-BIT LAN interface board – Has RJ-45 connector – Supports both EtherTwist (10Base-T) and 100VG/802.12 – PCI 32-Bit LAN Interface Board – has RJ-45 Connector – Supports Both Ethertwist (10BASE-T) & 100VG/802.12 (J2585B, 1/6 of J3009B, 1/24 of J3010B)

NetRaid-1M single-channel Ultra3 SCSI disk array controller W/32MB cache – PCI board with one internal 68-pin High Density and one external 68-pin Very High Density Ultra3 SCSI connector

NetRAID-1M Single-Channel Disk Array Controller W/32MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

NetRaid-2M dual-channel disk array controller W/64MB cache – PCI board with two internal 68-pin High Density and two external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-2M Dual-Channel Disk Array Controller W/64MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

Ultra160 LVD SCSI adapter board (Adaptec ASC-29160) – 64-bit, 66MHz PCI – External 68-pin High Density LVD connector, internal 68-pin Ultra160 LVD connector, internal 68-pin SE connector, internal 50-pin Narrow SE connector

Ultra 160 LVD SCSI adapter board (Adaptec ASC-29160) – 64 bit, 66MHz PCI – External 68 pin high density LVD connector, internal 68 pin Ultra 160 LVD connector, internal 68 pin single-ended connector, internal 50 pin narrow single-ended connector

NetRaid-2M dual-channel disk array controller W/128MB cache – PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors

NetRAID-2M Dual-Channel Disk Array Controller W/128MB Cache – PCI Board With Two Internal 68 Pin High Density and four External 68 Pin Very High Density Ultra3 SCSI Connectors

Gigabit LAN adapter – PCI-X 10/100/1000TX 3Com LAN card – (3Com 3C996-T)

Redundant hot swap power supply (Rev B) – 200/240VAC input, 750 watts – Located in the lower back of chassis

Intel Pentium II Xeon processor – 450MHz (Drake, 100MHz front side bus, 1MB Level-2 cache, Slot 2 – for HP LXr8000 PIII/450

Intel Pentium II Xeon processor upgrade – Includes one 450MHz (1MB Level-2 cache, Slot 2) processor – (For HP LXr8000 PIII/450 NetServer)

Intel Pentium II Xeon processor – 450MHz (Drake, 100MHz front side bus, 2MB Level-2 cache, Slot 2) foR HP LXr8000 PIII/450

Intel Pentium II Xeon processor upgrade – Includes one 450MHz (2MB Level-2 cache, Slot 2) processor – (For LXr 8000 PIII/450 )

Intel Pentium II Xeon processor – 450MHz (Drake, 100MHz front side bus, 512KB Level-2 cache, Slot 2) – Includes heat sink – For LXr8000 PIII/450 NetServer

Intel Pentium II Xeon processor upgrade – Includes one 450MHz (512KB Level-2 cache, Slot 2) processor for HP LXr8000 PIII/450

Intel Pentium III Xeon processor – 500MHz (Tanner, 100MHz front side bus, 2MB Level-2 cache, Slot 2) – Includes heat sink for LXr8000 PIII/500 NetServer

Intel Pentium III Xeon processor upgrade – Includes one 500MHz (2MB Level-2 cache, Slot 2) processor for HP LXr8000/500

Intel Pentium III Xeon processor – 500MHz (Tanner, 100MHz front side bus, 512KB Level-2 cache, Slot 2) – Includes heat sink for LXr8000 PIII/500

Intel Pentium III Xeon processor upgrade – Includes one 500MHz (512KB Level-2 cache, Slot 2) processor for HP LXr8000 PIII/500

Intel Pentium III Xeon processor – 500MHz (Tanner, 100MHz front side bus, 1MB Level-2 cache, Slot 2) – Includes heat sink for HP LXr8000 PIII/500 NetServer

Intel Pentium III Xeon processor upgrade kit – Includes one 500MHz (1MB Level-2 cache, Slot 2) processor with heatsink and voltage regulator module for LXr8000 PIII/500

Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 512KB Level-2 cache, Slot 2 for HP LXr8000 PIII/550

Intel Pentium III Xeon processor upgrade – Includes one 550MHz (Tanner, 512KB Level-2 cache, Slot 2) processor for LXr8000 PIII/550

Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 1MB Level-2 cache, Slot 2) for LXr8000 PIII/550

Intel Pentium III Xeon processor upgrade – Includes one 550MHz (Tanner, 1MB Level-2 cache, Slot 2) processor for LXr8000 PIII/550 NetServer

Intel Pentium III Xeon processor – 550MHz (Tanner, 100MHz front side bus, 2MB Level-2 cache, Slot 2 for LXr8000 PIII/550 NetServer

Intel Pentium III Xeon processor upgrade – Includes one 550MHz (Tanner, 2MB Level-2 cache, Slot 2) processor for HP LXr8000 PIII/550