Demande de devis pour ce produit





TypeImageRéférence DescriptionCotation
KEYBOARD
435302-001

PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (USA)


CABLE
5182-4535

Ribbon cable assembly – 3-pin (F) connector to 3-pin (F) connector – 30cm (11.8in) long – I2C bus cable assembly – From hot-swap backplane boards to system (mother) board (two used)


CABLE
5182-4523

Fast Wide internal SCSI cable – 68-pin (M) to 68-pin (M) – 23cm (9in) long – Cable C4 – Between the two hot-swap backplane boards (configuration dependent)


CABLE
5182-4570

Ribbon cable for one IDE hard disk drive – Cable marked ‘IDE hard disk cable’ – 40-pin (F) connector to 40-pin (F) connector – 40.9cm (16.1in) long


CABLE
5063-8400

Ribbon cable with two self adhesive cable clamps and installation instructions – 8-pin (F) connector marked ‘NetServer’ to 8-pin (F) connector marked ‘Remote Assistant’ – 1.0m (39in) cable folded to be 63.5cm (25in) long – From Remote Assistant board to c


CABLE
5182-0015

Floppy drive ribbon cable marked ‘Flexible disk cable’ – 34-pin (F) connector marked ‘to system board’ to a 34-pin (F) old-style edge connector and a 34-pin (F) new-style connector marked ‘to 3.5 inch flexible disk drive’ – 61.5cm (24.2in) long


CABLE
5182-4521

Fast Wide SCSI ribbon cable (C2) – Cable marked ‘Int. SCSI cable C2-80 ohm’ – 68-pin (M) connector marked ‘System board or PCI board’ to 68-pin (M) connector marked ‘SCSI mass storage device’ – 59.9cm (23.6in) long – From hot-swap backplane boards to a PC


CABLE
5182-4522

SCSI ribbon cable with termination – Cable is marked ‘Array SCSI cable (Narrow)’ – One 50-pin (F) connector marked ‘To array back plane’ and two 50-pin (F) connectors marked ‘To unterminated SCSI device’ – 34.3cm (13.5in) long – From CD-ROM drive to hot-s


CABLE
5182-6734

Fast wide SCSI ribbon cable kit (C3)- Two connector mounting screws and a cable marked ‘Wide SCSI Channel B cable’ – 68-pin (M) connector to high density 68-pin (F) connector with latch clips for the rear panel – 47cm (18.5in) long – From system board SCS


CABLE
D3330-60010

NetServer LS cable kit – For adding drives or reconfiguring the system – Includes internal (C2) and external (C3) fast wide cables, and a narrow to fast wide adapter


BEZEL
5063-0328

Bezel assembly – Plastic cover over the control panel PC board has cut outs for the switches and display


BEZEL
5063-5673

‘Hot swap’ bezel assembly – Frame around six ‘hot swap’ drives – Includes the hot swap drive retainer lock


FAN
3160-1004

Tubeaxial fan with sensor (NMB Technologies 3610KL-04W-B49-P01) – 92mm x 92mm x 25mm thick, 12VDC, 2,850 RPM, 1.35CFM – Includes cable assembly – Mounts to the front panel (2 used)


ADAPTER
5182-4550

SCSI adapter (68-pin (F) to 50-pin (M)) – Used in some configurations for the CD-ROM drive and/or another Single-Ended SCSI drive (Narrow 8-bit to Fast Wide 16-bit)


COVER
5063-0384

Chassis cover – Includes front, top and both sides


COVER
5063-8301

Locking cover – Attaches to the front of one of the ‘Hot swap’ drive trays


PANEL
5063-5676

Filler panel (Dove Gray) – Covers the empty Hot-Swap drive slots


MODULE
D3575-63002

DC to DC converter module (5V to 3.3V) – Mounts above the power supply on the rear panel – For NetServers that have two processor boards with dual Pentiums only


MOUSE
C3751-60201

PS/2 two-button serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-DIN connector – (Part of C3751B)


DRIVE
D3581-69001

1.05GB hot-swap Fast SCSI-2 hard drive module (Parchment White)


DRIVE
D4289-69001

9.1GB hot-swap Ultra SCSI-2 hard drive module (Quartz Gray)


DRIVE
5064-7985

SCSI-2 CD-ROM drive (Flint Gray) – 32X CD-ROM read – Has loading tray – Replacement for the 4X CD-ROM (Model D2992B) and 12X CD-ROM drives


DRIVE
D2035-60282

1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height – (Part of D2035A/B)


DRIVE
D2076-69002

1GB Fast SCSI-2 hard drive – 3.5-inch form factor, low profile


DRIVE
D2077-69001

2.0GB SCSI-2 hard drive – 5,400 RPM, 3.5-inch form factor


DRIVE
D2967-69004

HP LS NetServer Remote Assistant Assy (for Outside of Canada/US) (D2967C) – without on-board Modem – When Upgrading from a D2967A/B to D2967C also Order Firmware/Software Upgrade Kit


DRIVE
D3340-69001

2.1GB SCSI-2 hard drive – 7,200 RPM, 3.5-inch form factor


DRIVE
D3341-69001

4.0GB SCSI-2 hard drive – 5,400 RPM, 3.5-inch form factor


DRIVE
D3582-69001

2.1GB hot-swap SCSI-2 hard drive module (Dove Gray)


DRIVE
D3583-69001

4.2GB hot-swap SCSI-2 hard drive module (Parchment White)


MEMORY
D2297-69001

16MB, 70nS, 36-bit parity SIMM memory module for HP LS NetServer


MEMORY
D2974-63001

4MB, 70nS, 36-bit parity SIMM memory module for HP LS NetServer


MEMORY
D3577-69001

8MB, 70nS, 36-bit parity SIMM memory module for HP LS NetServer


MEMORY
D3578-69001

32MB, 70nS, 36-bit parity SIMM memory module for HP LS NetServer


PC BOARD
D2968-69005

HP LS NetServer Remote Assistant PC Board Assembly (Canada/US) (D2968C) – with on-board Modem – When Upgrading from a D2968A/B to D2968C also Order Firmware/Software Upgrade Kit


PC BOARD
D2971-63006

HP LS NetServer ECC Memory Board (with 12 SIMM Sockets) – Plugs into the Top of the System (Mother) Board (2 Can be Used)


PC BOARD
D3330-69011

HP LS NetServer System (Mother) Board – with VGA, IDE and 2 Fast Wide SCSI-2 Controllers – Large Vertical Board in Center of Computer


PC BOARD
D3574-69001

HP LS NetServer Processor Board (with Single 100MHz Pentium Processor IC) – Plugs into the System (Mother) Board (2 Can Be Used)


PC BOARD
D3604-63003

HP LS NetServer ‘Hot Swap’ Backplane Board – for the ‘Hot Swap’ Drives – Mounts in the Rear of the ‘Hot Swap’ Drive Cage (2 Used)


PC BOARD
5064-0739

HP LS NetServer Control Panel Board (Includes the Display and Switches) – Mounts to the Front Panel


INTERFACE
D2967C

Remote Assistant Board (for Outside of Canada/USA) – Intelligent EISA Based Remote Management Board with Onboard NiCad Battery and Processor – Does NOT Include a Modem


INTERFACE
27252-69001

ISA 16-Bit LAN Interface Board with ThinLAN (10BASE-2) and AUI Connectors (27252A)


INTERFACE
C3610-69050

Dual Channel Fast Wide SCSI Disk Array Controller Board – (P/O C3610A) – Plugs into a PCI Board Slot on the System (Mother) Board


INTERFACE
D2968C

Remote assistant board – Intelligent EISA based remote management board with onboard nickel cadmium (NiCd) battery, processor, and modem (Canada and USA)


INTERFACE
J2585-69011

32-bit PCI LAN interface board – RJ-45 connectors – Supports both EtherTwist 10Base-T and 100VG/802.12 – (J2585B, part of J3009B, part of of J3010B)


INTERFACE
J2585B

PCI 32-Bit LAN Interface Board – has RJ-45 Connector – Supports Both Ethertwist (10BASE-T) & 100VG/802.12 (J2585B, 1/6 of J3009B, 1/24 of J3010B)


INTERFACE
J3239-61001

ISA 16-Bit LAN Interface Board with EtherTwist (10Base-T) and AUI Connectors (Equivalent Replacement for 27247B, 1/6 of 27269B, 1/24 of J2427B)


POWER SUPPLY
5063-5635

Power supply assembly – 470 watts – Mounts to the rear panel


PROCESSOR
D3574A

HP NetServer Dual 5/100LS SMP processor board – For adding second processor board with one 100MHz Pentium processor


PROCESSOR
D3575A

HP NetServer 5/100LS SMP processor board – For adding second processor board with two 100MHz Pentium processors