SCSI interface cable with thumbscrews on ends – 68 pin high density (M) to 68 pin high density (M) – 0.5m (1.6ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 128 ohms – 5.0m (16ft) long

Single-Ended SCSI-2 interface cable – 50-pin high density (M) thumbscrew to 50-pin low density (M) bail lock – 1.0m (3.3ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 10.0m (33ft) long

SCSI interface cable with thumbscrews on both ends – Has 68-pin high density (M) connectors – 20.0m (65.6ft) long – (C7532A)

Video cable with Enhanced Video Connectors (EVC) on both ends – 1.8m (6.0ft) long

Single-Ended SCSI-2 interface cable with bail locks on both ends – 50-pin low density (M) to 50-pin low density (M) – 1.0m (3.3ft) long – (92222B)

Single-Ended SCSI-2 interface cable with bail locks on both ends – 50-pin low density (M) to 50-pin low density (M) – 0.5m (1.6ft) long – (92222A, part of 98658A)

Single-Ended SCSI-2 interface cable with bail locks on both ends – 50-pin low density (M) to 50-pin low density (M) – 2.0m (6.6ft) long – (92222C)

Single-Ended SCSI-2 interface extension cable with bail locks on both ends – 50-pin low density (M) to 50-pin low density (F) – 1.0m (3.3ft) long – (92222D)

Single-Ended SCSI-2 interface cable with thumbscrews on both ends – 50-pin high density (M) to 50-pin high density (M) – 1.0m (3.3ft) long – (C2908A)

Single-ended SCSI-2 interface cable with bail locks on both ends – 50 pin low density (M) to 50 pin low density (M) – 0.5m (1.6ft) long

Single-Ended SCSI-2 interface cable with bail locks on both ends – 50-pin low density (M) to 50-pin low density (M) – 1.0m (3.3ft) long

Single-ended SCSI-2 interface cable with bail locks on both ends – 50 pin low density (M) to 50 pin low density (M) – 2.0m (6.6ft) long

Single-ended SCSI-2 interface extension cable with bail locks on both ends – 50 pin low density (M) to 50 pin low density (F) – 1.0m (3.3ft) long

Single-Ended SCSI-2 ribbon cable – Three 50-pin (F) internal connectors and a high density 50-pin (F) connector with latch clips for the rear panel – 75cm (29.5in) long – From system processor board to disk drive tray assembly

Wide Differential SCSI ribbon cable with a ferrite – Has three 68-pin (M) internal connectors and a 68-pin (F) connector for the rear panel – 94cm (37in) long – From optional Wide Differential SCSI-2 controller to disk drive tray assembly

Floppy ribbon cable – 26-pin (M) connector marked ‘This end to floppy’ to 26-pin (M) connector – 35.3cm (13.9in) long

CD audio cable – 3-pin (F) connector to 3-pin (F) connector – 23cm (9in) long – From system board to CD-ROM drive

SCSI interface extension cable with bail locks on both ends – 50 pin low density (M) to 50 pin low density (F) – 3.0m (9.8ft) long

SCSI interface extension cable with bail locks on both ends – 50 pin low density (M) to 50 pin low density (F) – 5.0m (16ft) long

Single-ended SCSI-2 interface cable with thumbscrews on both ends – 50 pin high density (M) to 50 pin high density (M) – 1.0m (3.3ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 0.9m (3.0ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 128 Ohms – 1.0m (3.3ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 128 Ohms – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 10m (33ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 10m (33ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 20.0m (66ft) long

Single-ended SCSI-2 interface cable with bail locks on both ends – 50 pin low density (M) to 50 pin low density (M) – 3.0m (9.8ft) long

Single-ended SCSI-2 interface cable with bail locks on both ends – 50 pin low density (M) to 50 pin low density (M) – 5.0m (16ft) long

Single-ended SCSI-2 interface cable with thumbscrews on both ends – 50 pin high density (M) to 50 pin high density (M) – 0.5m (1.6ft) long

SCSI interface cable with thumbscrews on both ends – 50 pin high density (M) to 50 pin high density (M) – 1.5m (4.9ft) long

Single-ended SCSI-2 interface cable with thumbscrews on both ends – 50 pin high density (M) to 50 pin high density (M) – 2.0m (6.6ft) long

Single-ended SCSI-2 interface cable with thumbscrews on both ends – 50 pin high density (M) to 50 pin high density (M) – 5.0m (16ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 128 Ohms – 0.5m (1.6ft) long

SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

Low Voltage Differential/Ultra2 Single-Ended SCSI interface cable with thumbscrews on both ends – 68-pin high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 128 Ohms – 10.0m (33ft) long

SCSI interface cable with thumbscrews on both ends – 68 pin high density (M) to 68 pin high density (M) – 128 Ohms – 10.0m (33ft) long

SCSI interface cable with thumbscrews on both ends – Has 68 pin high density (M) connectors – 20.0m (65.6ft) long

SCSI interface cable – Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends – 68-pin ultra high density (M) to 68-pin high density (M) – 2.5m (8.2ft) long

Single-Ended SCSI-2 interface cable – 50-pin high density (M) thumbscrew to 50-pin low density (M) bail lock – 1.0m (3.3ft) long

Single-ended SCSI-2 interface cable – 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock – 1.5m (4.9ft) long

Single-Ended SCSI-2 interface cable – 50-pin high density (M) thumbscrew to 50-pin low density (M) bail lock – 1.5m (4.9ft) long – (K2297)

Chassis assembly – Includes all covers, disk filler panels, main tray, storage tray, hard drive trays, floppy tray, fans, speaker, light pipe, rear panel assembly (with handle)

Fan assembly and power cable – Provides the power and the cooling to the disk drive tray assembly – Neither the fan nor the power cable is available separately

Fan assembly and power cable – Provides the power and the cooling to the disk drive tray assembly – Neither the fan nor the power cable is available separately

Tubeaxial fan – 90mm x 90mm – One Used to cool the power supply and one used to Cool the plug-in boards (if the computer was NOT upgraded to use VISUALIZE-FX series graphics board)

Tubeaxial fan – One used to cool the plug-in boards if the computer was upgraded to use VISUALIZE-FX series graphics board

Hyper CRX-8 graphics adapter board – With 8/8 double buffered image planes for 2D vector and 3D wireframe

Hyper CRX-24 graphics adapter board – With 24/8 bit planes for accelerated 2D imaging

Video out board – Provides NTSC, PAL, and S-video outputs – Ships with no cables – For A4070B, A4071B, A4079B, A4211A, A4244A, A4246A, A4441A, A4442A in HP9000 B/C/J class

VISUALIZE-8 accelerated 3D solids graphics adapter – With 8 image planes for 2D imaging and 3D wireframe

VISUALIZE-8 accelerated 3D solids graphics adapter – With 8 image planes for 2D imaging and 3D wireframe

VISUALIZE-24 accelerated 3D solids graphics adapter – With 24 image planes for 2D imaging and 3D wireframe

VISUALIZE-24 accelerated 3D solids graphics adapter – With 24 image planes for 2D imaging and 3D wireframe

VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics – Includes color recovery – Has EVC video output connector

VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics – Includes color recovery – Has EVC video output connector

Dual VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics – Includes color recovery – Has EVC video output connector

Dual VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics; includes color recovery – Has EVC video output connector

Video output board for VISUALIZE-FX series graphics products only – Provides NTSC, PAL,AND S-VIDEO outputs

Enhanced Video Connector (EVC) video adapter cable – EVC (M) to 15-pin (F), 20cm (7.87in) long – Used to connect EVC video output to 15-pin monitor connector

Enhanced Video Connector (EVC) video adapter cable – EVC (F) to 15-pin (M) – 7.87in (0.2m) long – Used to connect EVC video output to 15-pin monitor connector – (A4167A)

Enhanced Video Connector (EVC) video adapter cable – EVC (F) to 15-pin (M), 20cm (7.87in) long – Used to connect EVC video output to 15-pin monitor connector

Enhanced Video Connector (EVC) video adapter cable – EVC (M) to 15 pin (F), 20cm (7.87in) long – Used to connect EVC video output to a 15-pin monitor connector

Empty I/O slot cover – For empty rear panel EISA, GSC, and PCI board slots

Filler panel – For empty 3.5-inch drive bays

Filler panel – For empty 5.25-inch drive bays

2GB Single-Ended SCSI-2 hard drive – 3.5-inch form factor – (Part of A4213A)

2.0GB Differential Fast Wide SCSI-2 hard drive – 7,200 RPM, 3.5-inch form factor

4.0GB Fast Wide Differential SCSI-2 hard drive – 7,200 RPM, 3.5-inch form factor – (Part of A4477A)

4GB Single-Ended SCSI-2 hard drive – 3.5-inch form factor

2.0GB Fast Wide Differential SCSI-2 hard disk drive – 3.5-inch form factor, low profile – (Part of A4214A)

4GB Single Ended SCSI-2 hard drive – 3.5-inch form factor

1.44MB slim line floppy drive

2GB/4GB Single-Ended SCSI-2 DDS-1 (DAT) tape drive

4.0GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor

Single-Ended SCSI-2 CD-ROM drive – 4X CD-ROM read

1.44MB slim line floppy drive

2GB Differential Fast Wide SCSI-2 hard drive – 3.5-inch form factor

9.1GB Differential Fast Wide SCSI-2 hard drive – 7,200 RPM, 3.5-inch form factor – (Part of A4485A)

4.0GB Fast Wide Differential SCSI-2 hard drive – 7,200 RPM, 3.5-inch form factor

4GB Single-Ended SCSI-2 hard drive – 3.5-inch form factor

2GB Single-Ended SCSI-2 hard drive – 3.5-inch form factor

Single-Ended SCSI-2 CD-ROM drive – 12X CD-ROM read

4GB/8GB Single-Ended SCSI-2 DDS-2 DAT tape drive

2GB/4GB Single-Ended SCSI-2 DDS-1 (DAT) tape drive – (A4076A)

4GB/8GB Single-Ended SCSI-2 DDS-2 (DAT) tape drive – 5.25-inch form factor – (Part of A4216A)

Single-Ended SCSI-2 slot load DVD-ROM drive kit – 6X DVD-ROM read, 32X CD-ROM read – Includes drive with headphone jack & volume control, instruction sheet, and CD audio cable – (Pioneer DVD-303/304 mechanism)

32MB, 72-pin ECC DIMM memory module for HP9000 B132L

16MB, 72-pin ECC DIMM memory module for HP9000 B132L

64MB, 72-pin ECC DIMM memory module for HP9000 B132L

128MB, 72-pin ECC DIMM memory module for HP9000 B132L

256MB memory upgrade kit – Includes two 128MB DIMM modules

512kB, 100MHz cache memory module – Plugs into one of two sockets on the system processor board (1MB kit is A4299A)

32MB ECC memory upgrade kit – Includes two 16MB SIMM modules

32MB ECC memory upgrade kit – Includes two 16MB SIMM modules

128MB ECC DIMM memory upgrade kit – Includes two 64MB DIMM modules

128MB ECC DIMM memory upgrade kit – Includes two 64MB DIMM modules

64MB ECC memory upgrade kit – Includes two 32MB SIMM modules

64MB ECC memory upgrade kit – Includes two 32MB SIMM modules

1MB second-level cache memory upgrade – Includes two 512kB memory modules

2MB VISUALIZE-EG display memory RAM daughter board

2MB VISUALIZE-EG display memory RAM daughter board

HP9000 B132L Hyper CRX-8 Graphics Adapter – with 8/8 Double Buffered Image Planes for 2D Vector and 3D Wireframe (P/O A4070B, 1 of 2 Boards in A4079B, 1 of 2 Boards in A4441A)

HP9000 B132L Hyper CRX-24 Graphics Adapter Board (P/O A4071B, 1 of 2 Boards in A4442A)

HP9000 B132L System processor board – 132MHz –

HP9000 B132L EISA/GSC/PCI backplane board – 5 volt 32 bit PCI – EISA/GSC/PCI Backplane Board (A4542A) – Mounts in Center of Main Tray Assembly – 5 Volt 32 Bit PCI (Also Replaces the 3.3V PCI Backplane Board)

HP9000 B132L Z-Buffer Accelerator Board (A4242A, 1 of 2 Boards in A4079B, 1 of 2 Boards in A4441A, 1 of 2 Boards in A4442A) – For HyperCRX-8 (A4070B) or HyperCRX-24 (A4071B) Graphics Boards

HP9000 B132L Video out board – Mounted on the VISUALIZE-48XP frame buffer and geometry accelerator board – (Part of A4248A) – For A4070B, A4071B, A4079B, A4211A, A4244A, A4246A, A4441A, A4442A in HP9000 B/C/J Class

HP9000 B132L VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics – Includes color recovery – (Part of A4450A)

HP9000 B132L Dual VISUALIZE-EG graphic accelerator board – For 2D and 3D wireframe graphics – Includes color recovery – (A4451A)

HP9000 B132L 2MB EG Display Memory RAM Daughter Board(A4452A) – Mounts on System Processor Board with Integrated VISUALIZE-EG Graphics (OR on A4450A/A4451A Optional VISUALIZE-EG Graphics Board)

HP9000 B132L VISUALIZE-FX2 graphics board – 1280 × 1024 accelerated 3D solids double-buffered 12-plane color graphics board with 8 overlay planes – (Part of A4552A)

HP9000 B132L VISUALIZE-FX4 graphics board – 1280 × 1024 accelerated 3D solids double-buffered 24-plane color graphics board with 8 overlay planes – (Part of A4553B, replacement for A4553A)

HP9000 B132L Video-out board – For A4552A (VISUALIZE-FX2), A4553A/B (VISUALIZE-FX4), or A4554A (VISUALIZE-FX6) graphics boards

EISA HP-IB Host Adapter Board (25560A)

EISA HP-IB Interface – Occupies EISA Slot in Computer

EISA PSI board – Provides SNA/X.25 LAN connection – High Speed EISA X.25 Board (P/O J2794A)

Single Ended SCSI-2 Interface Board – Plugs into an EISA Bus Slot (A2679A)

Fast Wide Differential SCSI-2 GSC/HSC interface board – (Part of A4107A)

Wide Differential SCSI-2 Interface Board – Attaches to Side of Backplane Board

Remarketed Wide Differential SCSI-2 Interface Board – Attaches to Side of Backplane Board

Fast Wide Differential SCSI-2 interface board – Wide Differential SCSI-2 Interface Board – Attaches to Side of Backplane Board (A2889A)

Token Ring (IEEE 802.5 network) interface board – Plugs into an EISA bus slot – (Part of J2165A)

Token ring (IEEE 802.5 networks) interface board – Plugs into an EISA bus slot

ISDN BRI link module for HP 9000 series 700 – External box which connects to the computer via a single ended SCSI-2 interface cable and to the ISDN network via an RJ-45 cable – Includes software, power moudle, power cord, SCSI terminator, and RJ-45 cable

8 Port RS-232 Direct Connect MUX System Board (P/O J2482A) – Plugs into an EISA Bus Slot

8 port RS-232 direct connect MUX system board – Plugs into an EISA bus slot

High speed X.25 board – Provides line speed up to 1.5 Mbps – Plugs into an EISA bus slot

Switching power supply (Delta DPS-200QP) – 115-230VAC input, 50-60Hz – Five DC outputs, 200 watts – Mounts in the bottom of the left side of the main tray assembly