Audio cable assembly – For CD-ROM, CD-RW, or DVD-ROM – 4-pin (F) connector to 4-pin (F) connector – 47.8cm (18.8in) long

IDE CD-ROM drive ribbon cable with ferrite – 40-pin (F) connector marked ‘to PCA’ to a 40-pin (F) connector marked ‘to CD-ROM’ – 34cm (13.4in) long – From CD-ROM drive to system processor board

Ultra SCSI/Low Voltage Differential (LVD) SCSI cable – Has one 68-pin (M) connector on each end – 0.6m (2ft) long

Floppy drive ribbon cable with ferrite – 34-pin (F) connector marked ‘to PCA’ to 34-pin (F) connector marked ‘to floppy’ – 43.2cm (17in) long

Drive power cable – Two 4-pin (F) connectors with four wires and a 4-pin (F) connector with two wires – 85cm (33.5in) long – From CD-ROM and floppy drives to system processor board

Ribbon cable – DB-25 (M) connector to 20-pin (F) connector – 46cm (18in) long – From LCD display to system processor board

Chassis assembly – Includes: 2 rear fans, hard drive/memory fan, I/O card fan, I/O card guide with speaker, I/O card bracket, air divider, IDE, FDD, and SCSI LVD power and data cables, status panel with cable, drive trays, and the front bezel assembly

Tubeaxial fan (Panaflo model FBA09A12H) 92mm x 92mm x 25mm thick fan with 22cm long three wire cable – 12VDC nominal operating voltage – Mounts to the I/O card cage bracket

Tubeaxial fan kit (Panaflo model FBA12G12H) – 120mm x 120mm x 37mm thick fan with 30cm long 3-wire cable – 12VDC nominal operating voltage – Includes ESD wrist strap and instructions – Used for CPU cooling

Tubeaxial fan (Panaflo FBA08T12H) – 80mm x 80mm x15mm fan with three wire cable – 12VDC nominal operating voltage

HP VISUALIZE-fx2 graphic accelerator board – 24/8 bit accelerated 3D solids – Has EVC video connector – Requires HP-UX 10.20 with ‘Additional Core Enhancements’ (ACE)

VISUALIZE-FX2 graphic accelerator board – 24/8 bit accelerated 3D solids – Has EVC video connector – Requires HP-UX 10.20 with ‘Additional Core Enhancements’ (ACE)

HP VISUALIZE-FX4 PCI graphics card

Video output board for VISUALIZE-FX series graphics products only – Provides NTSC, PAL,AND S-VIDEO outputs

Texture memory upgrade for VISUALIZE-FX4 – Adds 16MB texture memory and 32KB x 32KB virtual texture cache

Texture memory upgrade for VISUALIZE-FX4 – Adds 16MB texture memory and 32KB x 32KB virtual texture cache

HP VISUALIZE-EG PCI graphics card with 4MB memory – The EG card is 8 plane with 8 overlay planes – Can be used in either a 3.3V or 5.0V PCI slot

1.44MB, 3.5-inch floppy drive (Panasonic) – No bezel

9.1GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST39102LC) – (Part of A4997A)

9.1GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST39102LC) – (Part of A4997A)

9.1GB Ultra2 Wide SCSI LVD hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high, and 80-pin SCA connector (Quantum Atlas V, 3.5 series) – (Part of A4996A)

9.1GB Ultra2 Wide SCSI LVD hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high, and 80-pin SCA connector (Quantum Atlas V, 3.5 series)

18GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST318203LC) – (Part of A4998A)

36.4GB Ultra2 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST336704LC) – (Part of A6031A)

9.1GB Ultra2 wide SCSI LVD hard drive – 7,200 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

9.1GB Ultra2 wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

18GB Ultra2 Wide SCSI LVD hard drive – 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector

32x-max CD-ROM drive – Half-height CD-ROM drive with ATAPI IDE connector

1.44MB floppy drive – 3.5-inch form factor with IDE PC/AT interface

36GB Ultra2 Wide LVD SCSI hard drive – 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector

1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height – (Part of D2035A/B)

128MB, 120MHz SDRAM DIMM memory module for HP9000 B1000

256MB, 120MHz SDRAM DIMM memory module for HP9000 B1000

512MB, 120MHz SDRAM DIMM memory module for HP9000 B1000

1024MB, 120MHz SDRAM DIMM memory module for HP9000 B1000

128MB, 120MHz SDRAM DIMM memory module

256MB, 120MHz SDRAM DIMM memory module

512MB, 120MHz SDRAM DIMM memory module

1024MB, 120MHz SDRAM DIMM memory module

HP9000 B1000 VISUALIZE-FX2 graphics board – 1280 × 1024 accelerated 3D solids double-buffered 12-plane color graphics board with 8 overlay planes

HP9000 B1000 VISUALIZE-FX4 graphics board – 1280 × 1024 accelerated 3D solids double-buffered 24-plane color graphics board with 8 overlay planes – (Part of A4553B, replacement for A4553A)

HP9000 B1000 Texture memory mapping accelerator board – 16MB texture memory and 32KB x 32KB virtual texture cache – For A4553A/B (VISUALIZE-FX4) graphics board – Adds 8 planes

HP9000 B1000 HP VISUALIZE-EG PCI graphics card with 4MB memory – The EG card is 8 plane with 8 overlay planes – Can be used in either a 3.3V or 5.0V PCI slot –

HP9000 B1000 Motherboard – Includes 300MHz PA-8500 RISC processor module with attached heatsink and replacement instructions

HP9000 B1000 SCA (Single connector attach) hard disk backplane PCA – Has one female 68-PIN connector, and two 80-PIN SCA hard drive connectors

Power supply assembly (500 watts) – Includes power supply, safety interlock switch, and AC power connector – Mounts in the lower left of the chassis assembly