USB keyboard with PC-105 layout (Carbon Black) – Has 2.9m (10ft) cable with type (A) USB connector (French)

Internal CD-ROM audio cable – Has large 4 pin (F) connector on one end – Has large 4 pin (F) and small 4 pin (F) connector on the other end – 0.6m (2.0ft) long

SCSI hard drive cable – Connects between the four (maximum) hard drives and the system processor board SCSI ‘A’ connector

Rear panel SCSI cable assembly (includes the rear panel SCSI connector) – Connects between the rear panel and the system board SCSI ‘B’ connector or optional PCI SCSI card

IDE CD-ROM/DVD drive or hard drive data cable – Connects between the third CD-ROM/DVD drive or two (maximum) hard drives and the system processor board primary IDE connector

External SCSI connector kit – To add an external Ultra320 SCSI port on the rear of the computer – Can be connected to the integrated SCSI bus on the system board or to an optional PCI SCSI card – Includes cable, hardware and instructions

Cable assembly – Connects between the speaker and the optional PCI audio board

IDE CD-ROM/DVD drive data cable – Connects between two (first and second) CD-ROM/DVD drives and the system processor board secondary IDE connector

Tubeaxial fan assembly – 70mm x 70mm fan with attached finger guard and 4-wire cable

Tubeaxial fan assembly – 120mm x 120mm fan with attached finger guard and 4-wire cable

Tubeaxial fan assembly – 92mm x 92mm fan with attached finger guard and 4-wire cable

Rack mount kit – For converting a tower configured system to a rack mount system – Includes the front bezel, mounting rails, cable management arm, and installation instructions

HP VISUALIZE-fxe PCI graphics card with 9.5MB of texture memory (24MB SDRAM total memory) , 32-bit, 66MHz

ATI Fire GL X1 AGP 8X graphics card (FGL 9700 GPU based) – High-end 3D graphics board with 256MB DDR SGRAM memory, dual 400MHz/30-bit RAMDAC, and two DVI-I (F) analog/digital display outputs – Requires one AGP and one adjacent slot

ATI Fire GL T2-128p AGP 8X graphics card (FGL 9600 VPU based) – Mid-range 3D graphics board with 128MB DDR SDRAM memory, dual 400MHz/16-bit RAMDAC, one (F) DVI-I output, and one 15-pin (F) VGA output – Requires one AGP slot

USB to 2-port PS/2 adapter – For converting one or two PS/2 devices to USB – For USB only systems running HP-UX 10.20 or later – One type ‘A’ male USB connector to two 6-pin mini-DIN connectors, 38.1cm (15in) long cable

Right side cosmetic cover (or panel) – Used to cover the right side in a tower configured system

Access cover (or panel) – Includes the large rectangular cover (Carbon Black) with HP logo, lock, and release latch – Mounts on the left side of the computer in a tower configured system

Top cover (or panel) – Slightly curved plastic panel (Carbon Black) – Mounts on top of the computer in a tower configured system

Front panel bezel assembly (Carbon Black plastic) – has cut outs for the optical drive slots and control panel assembly – For a tower configured system

Front panel bezel assembly (Carbon Black plastic) – has cut outs for the optical drive slots and control panel assembly – For a rack mount configured system

USB 3-button scrolling mouse (Carbon Black) – Has 2.9m (10ft) cable with type (A) USB connector

USB 3-button mouse (Carbon Black) – Has 2.9m (10ft) cable with type (A) USB connector

IDE DVD±RW optical disk drive (Carbonite Black) – 16X speed, half-height form factor

36GB Ultra320 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

73GB Ultra320 Wide SCSI LVD hard drive – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

ATAPI IDE DVD-ROM drive – 16x-max DVD-ROM read, 40x-max CD-ROM read – Half height drive with Carbon Black faceplate

146GB Ultra320 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

146GB Ultra320 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

73GB Ultra320 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

73GB Ultra320 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

146GB Ultra320 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high – ORDER A9649-69001

73GB Ultra320 Wide SCSI LVD hard drive – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

ATAPI IDE CD-RW drive – 48X-max write, 12X-max rewrite, 48X-max read – Half height drive with Carbon Black faceplate – (Part of A8683B)

73GB Ultra320 Wide SCSI LVD hard drive – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

ATAPI IDE CD-RW drive – 48X-max write, 12X-max rewrite, 48X-max read – Half height drive with Carbon Black faceplate

146GB Ultra320 Wide SCSI LVD hard drive – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

73GB Ultra320 Wide SCSI LVD hard drive (Segate or Fujitsu) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

1.0GB SDRAM (1 DIMM) memory module – PC2100 DDR-266MHz, ECC, 1.2-inch registered for HP9000 C8000

2.0GB SDRAM DIMM memory module Kit – Includes a pair of 1.0GB PC2100 DDR-266MHz, ECC, 1.2-inch registered DIMMs for HP9000 C8000

2.0B SDRAM DIMM memory module – PC2100 DDR-266MHz, ECC, 1.2-inch registered DIMM (one DIMM) – Memory must be installed in like pairs for HP9000 C8000

4.0GB SDRAM DIMM memory module Kit – Includes a pair of 2.0GB PC2100 DDR-266MHz, ECC, 1.2-inch registered DIMMs for HP9000 C80000

512MB, 266MHz, 200-pin, PC2100, ECC, 1.2-inch registered DIMM memory module – Memory must be installed in like pairs – Memory must be installed in like pairs for HP9000 C8000

1.0GB SDRAM DIMM memory module Kit – Includes a pair of 512MB PC2100 DDR-266MHz, ECC, 1.2-inch registered DIMMs for HP9000 C8000

Workstation C8000 ATI Fire GL X1 AGP 8X graphics card (FGL 9700 GPU based) – High-end 3D graphics board with 256MB DDR SGRAM memory, dual 400MHz/30-bit RAMDAC, and two DVI-I (F) analog/digital outputs – Requires one AGP and adjacent slot – (Part of A9653A

HP9000 C8000 ATI Fire GL T2-128p AGP 8X graphics card (FGL 9600 VPU based) – Mid-range 3D graphics board with 128MB DDR SDRAM memory, dual 400MHz/16-bit RAMDAC, one (F) DVI-I output, and one 15-pin (F) VGA output – Requires one AGP slot – (Part of AA929A,

HP9000 C8000 ATI Fire GL T2-128p AGP 8X graphics card (FGL 9600 VPU based) – Mid-range 3D graphics board with 128MB DDR SDRAM memory, dual 400MHz/16-bit RAMDAC, one (F) DVI-I output, and one 15-pin (F) VGA output – Requires one AGP slot

HP9000 C8000 HP VISUALIZE-fxe (rev B) PCI graphics board – 9.5MB of texture memory (24MB SDRAM total memory), 32-bit, 66MHz – (Part of A4982B)

1000Base-T Gigabit Ethernet network interface adapter board – Has one RJ-45 connector, requires one 64-bit PCI slot – (Part of A6825A, A8685A, and A7061A)

HP9000 Workstation C8000 System board – Has integrated IDE and SCSI drive interfaces – Does NOT include the processors or power modules – RSTRD AB601-60510

C8000 system board – Has integrated IDE and SCSI drive interfaces – Does NOT include the processors or power modules – RSTRD AB601-60510

HP9000 C8000 Audio sound card – Provides 16-bit stereo mic in, headphone out, line in, line out – Requires one PCI slot – For HP-UX operating system

HP9000 WORKSTATION C8000 Audio board – 16 bit audio board with microphone in, stereo out, line in, and line out connectors – Requires one PCI slot

1000Base-SX Gigabit Ethernet network interface adapter board – Has one duplex fiber optic connector, requires one 64-bit PCI slot – For HP-UX operating system

1000Base-T Gigabit Ethernet network interface adapter board – Has one RJ-45 connector, requires one 64-bit PCI slot – For HP-UX operating system

Single channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 15 devices – Has one 68-pin very high density external connector, and one 68-pin high density internal connector – For HP-UX operating system

1000 Base-SX Gigabit Ethernet network interface adapter board – Has one duplex fiber optic connector, requires one PCI slot

IEEE-1394 (FireWire) interface board (with diode) – 400, 200, 100Mbps data rates – Provides two external 6-pin ports and one internal 10-pin port (to connect to the front panel) – Requires one 3.3V PCI slot

IEEE 1394 (FireWire) low profile interface card – 400, 200, 100Mbps data rates – Two external 6-pin ports, one internal 4-pin power port, and one internal 10-pin port (to connect to the front panel) – Requires one 3.3V PCI slot (Option PA997A) – (Part of

Single channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 15 devices – Has one 68-pin very high density external connector, and one 68-pin high density internal connector – For HP-UX operating system

Processor power supply (or module) – DC to DC converter module with power supply cable (12V DC in, 1.5V DC at 100A nominal output) – Mounts on the system processor board – Plugs into the base of one of the two processor assemblies

AC power supply assembly (700-watt), with active power factor correction (APFC) – 88V to 265V AC, 47Hz to 66Hz input

900MHz PA-8800 processor upgrade – For adding a second processor module to the computer – Includes 2-way processor with 1.5MB L1 cache and 32MB L2 cache, power supply module, and instructions – Note: Processor speeds cannot be mixed within a system

1.0GHz PA-8800 processor upgrade – For adding a second processor module to the computer – Includes 2-way processor with 1.5MB L1 cache and 32MB L2 cache, power supply module, and instructions – Note: Processor speeds cannot be mixed within a system

C8000 processor – 1.0GHz (No Level-2 cache)