Type | Image | Référence | Description | Cotation |
---|
KEYBOARD | | A7861-65305 | USB keyboard with PC-105 layout (Quartz Gray) – Has 2.9m (10ft) cable with type (A) USB connector (French) |
 |
CABLE | | A6064-63001 | Converter dongle – Short cable with a (M) DVI-I connector and a (F) 15-pin VGA connector – For connecting a VGA monitor to a DVI-I port on the graphics card |
 |
CABLE | | A6144-63001 | Management processor M-cable |
 |
CABLE | | A7231-04018 | Power supply interface cable (module) assembly – Includes the dual power supply interface connector, the low voltage cables, and the two internal power cables terminated with line filter/power recptacle assemblies |
 |
CABLE | | A7231-63002 | Data cable – For IDE CD-ROM/DVD drive |
 |
CABLE | | A7231-63002 | Data cable – For IDE CD-ROM/DVD drive |
 |
CABLE | | A7231-63028 | Hard drive power cable |
 |
CABLE | | A7231-63029 | Y-cable assembly for super-80mm fan – 6-wire (three per connector) fan cable |
 |
CABLE | | A7231-63030 | Y-cable assembly for 80mm fan – 12-wire (three per connector) fan cable |
 |
CABLE | | A7231-63032 | Flex cable – For the management processor card |
 |
CABLE | | A7231-63038 | SCSI cable A-channel – Has one connector at each end |
 |
CABLE | | A7231-63039 | SCSI cable B-channel – Has one connector at each end |
 |
BEZEL | | A7231-04025 | Right side bezel for rack configurations (Flint Gray) |
 |
BEZEL | | A7231-04026 | Deskside front bezel assembly (Flint Gray) |
 |
BEZEL | | A7231-04030 | Left side bezel for rack configurations with latch (Flint Gray) |
 |
FAN | | A7231-04014 | Super 80mm tubeaxial fan |
 |
FAN | | A7231-04015 | Thin 80mm fan |
 |
FAN | | A7231-04017 | Standard 80mm fan |
 |
FAN | | A7231-04059 | 80mm dual fan |
 |
RACK MOUNT KIT | | A6939A | Field rack mount kit – For field integration into 19-inch wide cabinets at customer location – Includes rails and bezel |
 |
GRAPHICS | | A7226A | ATI FireGL4 graphics card – Extreme 3D graphics board with 128MB DDR SDRAM memory, 300MHz/30-bit palette RAMDAC, Dual DVI-I digital dispay outputs, and one 3-pin mini DIN stereo output – Requires one AGP and one adjacent PCI slot – For Windows and HP-UX |
 |
GRAPHICS | | A7806A | NVIDIA Quadro2 EX graphics card (NV11GL based) – Entry 3D graphics board with 32MB SDR SDRAM, 350MHz RAMDAC, and one DB-15 analog monitor output – Requires one APG Slot – For Windows and Linux operating systems |
 |
GRAPHICS | | A8049A | ATI RADEON 7000 2D graphics card – Professional 2D graphics board with 32MB DDR SDRAM memory, 300MHz RAMDAC, one analog monitor output, and one DVI-I analog/digital dispay output – Requires one AGP slot |
 |
GRAPHICS | | A8064A | NVIDIA Quadro4 900 XGL AGP 4X graphics card (NV25GL based) – High-end 3D graphics board with 128MB DDR SDRAM, Dual 350MHz RAMDAC, and Two DVI-I analog/digital output – Requires one APG Slot – For Windows and Linux operating systems |
 |
COVER | | A7231-00072 | ECI cover plate – Gray metal plate approximately 1.0-inches wide by 6.75-inches long |
 |
COVER | | A7231-04071 | Main cover (Carbon Black) – Metal cover with blue-colored release handle |
 |
COVER | | A7231-40021 | Deskside top cover |
 |
MOUSE | | 395736-001 | USB 3-button mouse (Quartz Gray) – Has 2.9m (10ft) cable with type (A) USB connector |
 |
AIRFLOW | | A7231-04004 | Fan cage assembly (metal) – Front half of the processor airflow system |
 |
AIRFLOW | | A7231-04034 | Main airflow guide (plastic) |
 |
FILLER | | A6198-60003 | Hot-swap hard drive slot filler panel (Carbon Black) |
 |
FILLER | | A6198-67002 | Filler panel – Used to cover an empty hard drive slot |
 |
FILLER | | A7231-40026 | Slimline optical drive bay filler panel (Gray plastic) |
 |
FILLER | | A7231-40027 | Slimline optical drive bay filler panel (Carbon Black plastic) |
 |
DRIVE | | A6982AR | 73GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive – 10,000 RPM, low profile, 80-pin SCA connector |
 |
DRIVE | | A7850A | IDE DVD-ROM drive – 8X-max read DVD, 24X-max read CD-ROM, slimline form factor – With Carbon Black faceplate |
 |
DRIVE | | A6980A | 36GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive – 10,000 RPM, low profile, 80-pin SCA connector |
 |
DRIVE | | A6980AR | 36GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive – 10,000 RPM, low profile, 80-pin SCA connector |
 |
DRIVE | | A6981A | 36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive – 15,000 RPM, low profile |
 |
DRIVE | | A6982A | 73GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive – 10,000 RPM, low profile, 80-pin SCA connector |
 |
DRIVE | | A6985A | Slimline DVD-ROM drive (Gray) – 8X DVD-ROM read, 24X CD-ROM read |
 |
DRIVE | | A6986-69001 | IDE slim form CD-RW/DVD-ROM combination drive (Flint Gray) – 12X-max write, 8X-max rewrite, 24X-max read CD, 8X-max read DVD |
 |
DRIVE | | A6986A | Slimline DVD-ROM/CD-RW drive (Gray) – 12X CD-R write, 8X CD-RW re-write, 24X CD-ROM read, 8X DVD-ROM read |
 |
DRIVE | | A7231-69024 | Slimline DVD-ROM/CD-RW combination drive (Carbon Black) – 12X CD-R write, 8X CD-RW re-write, 24X read CD-ROM, 8X read DVD-ROM |
 |
DRIVE | | A7835-69005 | 36GB hot-plug Ultra320 Wide SCSI Low Voltage Differential (LVD) hard drive (Carbon Black) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
 |
DRIVE | | A7835A | 36GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
 |
DRIVE | | A7835AR | 36GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
 |
DRIVE | | A7836A | 36GB hot-plug Ultra320 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
 |
DRIVE | | A7836AR | 36GB hot-plug Ultra320 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
 |
DRIVE | | A7837A | 73GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
 |
DRIVE | | A7837AR | 73GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
 |
DRIVE | | A7851A | IDE CD-RW/DVD-ROM drive – 12X-max write, 8x-max re-write, 8X-max read DVD, 24X-max read CD-ROM, slimline form factor -With Carbon Black faceplate |
 |
DRIVE | | A9919-67001 | Slimline DVD-ROM drive (Carbon Black) – 8X read DVD-ROM, 24X read CD-ROM |
 |
DRIVE | | A6981AR | 36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive – 15,000 RPM, low profile |
 |
DRIVE | | A7231-69011 | 8x-max read DVD, 24x-max read CD-ROM IDE slim form factor DVD-ROM drive (Gray) |
 |
DRIVE | | AB420-69001 | 36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
 |
MEMORY | | A6834-69001 | 1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module for HP Integrity rx2600 |
 |
MEMORY | | A6967AX | 256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module for HP Integrity rx2600 |
 |
MEMORY | | A7840A | 512MB DDR-SDRAM memory upgrade kit – Includes two 256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
 |
MEMORY | | A7841A | 1.0GB DDR-SDRAM memory upgrade kit – Includes two 512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
 |
MEMORY | | A7842A | 2.0GB DDR-SDRAM memory upgrade kit – Includes two 1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
 |
MEMORY | | A6968AX | 512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module for HP Integrity rx2600 |
 |
PC BOARD | | A7226-69520 | HP Integrity rx2600 ATI FireGL4 graphics card – Extreme 3D graphics board with 128MB DDR SDRAM memory, 300MHz/30-bit palette RAMDAC, Dual DVI-I digital dispay outputs, and one 3-pin mini DIN stereo output – Requires one AGP and one adjacent PCI slot |
 |
PC BOARD | | A7231-69512 | HP Integrity rx2600 System processor board (Does NOT include the processor or processor power module) |
 |
PC BOARD | | A7784A | HP Integrity rx2600 Audio sound card – Provides 16-bit stereo mic in, headphone out, line in, line out – Requires one PCI slot Includes the audio card, stereo headphones, and internal audio cable – For Windows or HP-UX operating systems – For HP-UX operat |
 |
PC BOARD | | A7806-69510 | HP Integrity rx2600 NVIDIA Quadro2 EX graphics card (NV11GL based) – Entry 3D graphics board with 32MB SDR SDRAM, 350MHz RAMDAC, and one DB-15 analog monitor output – Requires one APG slot |
 |
PC BOARD | | A8049-60520 | HP Integrity rx2600 ATI RADEON 7000 2D graphics card – Professional 2D graphics board with 32MB DDR SDRAM memory, 300MHz RAMDAC, one analog monitor output, and one DVI-I analog/digital dispay output – Requires one AGP slot |
 |
PC BOARD | | AB587-60002 | HP Integrity rx2600 Management processor board – For controlling the system console, reset and power management functions – Includes SIO (remote, console and UPS), VGA and LAN connectors |
 |
PC BOARD | | AB587-60004 | HP Integrity rx2600 PCI backplane/riser board – Has four PCI slots |
 |
PC BOARD | | AB587-60005 | HP Integrity rx2600 SCSI backplane board – Has three connectors for hot-swap hard drives |
 |
PC BOARD | | AB620-60503 | HP Integrity rx2600 Audio sound card – Provides 16-bit stereo mic in, headphone out, line in, line out – Requires one PCI slot – For HP-UX operating system |
 |
PC BOARD | | A8064-69520 | HP Integrity rx2600 NVIDIA Quadro4 900 XGL AGP 4X graphics card (NV25GL based) – High-end 3D graphics board with 128MB DDR SDRAM, Dual 350MHz RAMDAC, and Two DVI-I analog/digital output – Requires one APG slot – For Windows and Linux operating systems |
 |
INTERFACE | | 5185-8203 | FireWire (IEEE-1394A) adapter – 3-port |
 |
INTERFACE | | A5159-69001 | Dual port PCI Fast Wide High Voltage Differential SCSI-3 adapter – Has two external very high density 68-pin connectors and two internal high density 68-pin connectors – For HP-UX operating system |
 |
INTERFACE | | A5159A | Dual port PCI Fast Wide High Voltage Differential SCSI-3 adapter – Has two external very high density 68-pin connectors and two internal high density 68-pin connectors – For HP-UX operating system |
 |
INTERFACE | | A5506B | 100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) – Has four RJ-45 connectors – Require one 64-bit PCI slot – For HP-UX operating system |
 |
INTERFACE | | A6828A | Single channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 15 devices – Has one 68-pin very high density external connector, and one 68-pin high density internal connector – For HP-UX operating system |
 |
INTERFACE | | A6828AR | Single channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 15 devices – Has one 68-pin very high density external connector, and one 68-pin high density internal connector – For HP-UX operating system |
 |
INTERFACE | | A6829A | Dual channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 30 devices – Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors – For HP-UX operating system |
 |
INTERFACE | | A6829AR | Dual channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 30 devices – Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors – For HP-UX operating system |
 |
INTERFACE | | A6847A | 1000Base-SX Gigabit Ethernet network interface adapter board – Has one duplex fiber optic connector, requires one 64-bit PCI slot – For HP-UX operating system |
 |
INTERFACE | | A6875A | Management processor board – For controlling the system console, reset and power management functions – Includes SIO (remote, console and UPS), VGA and LAN connectors – NOT supported in tower configurations |
 |
INTERFACE | | A8084A | FireWire (IEEE-1394A) adapter – 3-port |
 |
INTERFACE | | A8685A | 1000Base-T Gigabit Ethernet network interface adapter board – Has one RJ-45 connector – Requires one PCI slot – For HP-UX operating system |
 |
INTERFACE | | B5509-66001 | 100Base-TX LAN host adapter board with one RJ-45 port – Requires one PCI slot – Includes the board, software, software license, and installation instructions – For HP-UX operating system |
 |
INTERFACE | | P3492-63000 | 10/100Base-T PCI network interface card with IPSec (3DES) – For Windows and Linux based systems |
 |
INTERFACE | | P3492A | 10/100Base-T IPSec (3DES) LAN host adapter board – With one RJ-45 connector – Reqires one PCI slot – For Windows and Linux operating systems |
 |
INTERFACE | | AB545-60001 | 1000Base-TX LAN four port host adapter board – Supports all PCI bus configurations – Has four RJ-45 connectors – Requires one PCI slot – For HP-UX operating system |
 |
INTERFACE | | B5509BA | 100Base-TX LAN host adapter board with one RJ-45 port – Requires one PCI slot – Includes the board, software, software license, and installation instructions – For HP-UX operating system |
 |
POWER SUPPLY | | 0950-4530 | Processor power supply (or module) – DC to DC converter module with power supply cable (12V DC in, 1.5V DC at 100A nominal output) |
 |
POWER SUPPLY | | 0950-4621 | Hot-swap redundant power supply – 650W |
 |
POWER SUPPLY | | A6874A | Hot-swap redundant power supply – 650W |
 |
PROCESSOR | | A7231-69130 | Intel Itanium 2 processor – 1.0GHz (McKinley, 400MHz front side bus, 3.0MB Level-3 cache) – Mounts on the system processor board |
 |
PROCESSOR | | A7231-69139 | Intel Itanium 2 processor – 900MHz (McKinley, 400MHz front side bus, 1.5MB Level-3 cache) |
 |
PROCESSOR | | A7845A | Intel Itanium 2 processor upgrade – Includes one 900MHz (200MHz front side bus, 1.5MB cache) processor |
 |
PROCESSOR | | A7848A | Intel Itanium 2 processor upgrade – Includes one 1.0GHz (200MHz front side bus, 3MB cache) processor |
 |