USB keyboard assembly (Carbon Black, 105 key layout) – Has attached 2.9m (9.5ft) cable with USB connector (French)

PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (French)

USB keyboard with PC-104 layout (Carbon Black) – Has 2.9m (10ft) cable with type (A) USB connector (United States English)

USB keyboard and mouse kit – Includes USB Windows 104/105-key keyboard (Carbon black) and USB two-button scrolling mouse (Carbon black)

Fiber optic converter – Converts from SC duplex plug to 2.5mm bay

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC and SC connectors – 2m (6.6ft) long

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 2m (6.6ft) long

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 15m (49ft) long

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 50m (164ft) long

Multimode Fiber (MMF) optic, LC (Lucent connector) cable – 200m (656.1ft) long

Multimode Fiber (MMF) optic, LC (Lucent connector) cable – 2m (6.6ft) long

V.35 DTE cable loopback hood

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 200m (656ft) long

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 200m (656ft) long

Management processor M-cable

Management processor M-cable

Power supply interface cable (module) assembly – Includes the dual power supply interface connector, the low voltage cables, and the two internal power cables terminated with line filter/power recptacle assemblies

Power supply interface cable (module) assembly – Includes the dual power supply interface connector, the low voltage cables, and the two internal power cables terminated with line filter/power recptacle assemblies

Data cable – For IDE CD-ROM/DVD drive

IDE cable

Single channel internal SCSI cable

Dual channel internal SCSI cable – Includes two cables

Hard drive power cable

Y-cable assembly for super-80mm fan – 6-wire (three per connector) fan cable

Y-cable assembly for 80mm fan – 12-wire (three per connector) fan cable

Flex cable – For the management processor card

SCSI cable A-channel – Has one connector at each end

SCSI cable B-channel – Has one connector at each end

Internal smart array cable

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 16m (52ft) long

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 16m (52ft) long

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 50m (164ft) long

Fiber-optic short wave multimode interface cable kit – Has a dual female SC adapter and a 50um core, 125um cladding, 2m (6.6ft) long interface cable with LC and SC connectors

Mux fanout cable with 8 RJ45 RS-232 connectors

X.21 interface cable

V.35 interface cable

RS-232 interface cable

RS-499 interface cable

X.21 interface cable

V.35 interface cable

RS-530 interface cable

Data cable – For IDE CD-ROM/DVD drive

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 2m (6.6ft) long

Fiber-optic short wave multimode interface cable – 50um core, 125um cladding – LC connectors – 200m (656ft) long

Right side bezel (Graphite) – For rack mount configuration

Left side bezel with rack latch – For rack mount configuration

Super 80mm tubeaxial fan

Thin 80mm fan

80mm dual fan

Thin 80mm fan

CPU/Chassis fan

Cable management arm – Mounts on the rear of the rack cabinet – Folding arm that guides the interconnecting cables when the computer slides in and out of the cabinet (prevents them from being pinched)

Rackmount installation kit – Used in cabinets with 48.26cm (19in) width and 1.25m (4.1ft), 1.6m (5.25ft), or 2m (6.56ft) height

Telco style rack mounting kit (needed for field integration into 2-post EIA racks)

2GB single channel PCI-X fibre channel Host Bus Adapter (HBA) – 64-bit, 133MHz – For use in servers based on either PCI or the latest PCI-X expansion bus

Adapter for fiber-optic short wave multimode interface cable – 50um core, 125um cladding – Female SC connectors

AC adapter (50-watt) power supply – 100-240 VAC input, +12 VDC output

Ultra3 SCSI adapter – 64-Bit, 66MHz, single channel, with PCI bus (Option A6828A)

USB to two-port PS/2 adapter – For converting one or two legacy or contemporary PS/2 devices to USB – For USB only systems running HP-UX 10.20 or later – One type ‘A’ Male USB connector to two 6-pin mini-DIN connectors, 38.1cm (15in) long cable

USB to 2-port PS/2 adapter – For converting one or two PS/2 devices to USB – For USB only systems running HP-UX 10.20 or later – One type ‘A’ male USB connector to two 6-pin mini-DIN connectors, 38.1cm (15in) long cable

HyperFabric (HF2) loopback hood

Side cover (metallic alloy) – For deskside configuration

Main cover (Carbon Black) – Metal cover with blue-colored release handle

Cover kit (unpainted) – Includes top cover and two side covers

ISO2110 (RS232 / RS530) loopback hood

RS449 loopback hood

IBM X.21 loopback hood

ECI cover plate – Gray metal plate approximately 1.0-inches wide by 6.75-inches long

Advanced Data Guard (ADG) module – For Smart Array 5300 series SCSI RAID controllers

USB scrolling mouse (Carbonite black) – Two button mouse with scrolling wheel – Has 1.8m (72in) long USB cable

USB 3-button scrolling mouse (Carbon Black) – Has 2.9m (10ft) cable with type (A) USB connector

Fan cage assembly (metal) – Front half of the processor airflow system

Main airflow guide (plastic)

Slimline optical drive bay filler panel (Gray plastic)

Slimline optical drive bay filler panel (Carbon Black plastic)

Hot-swap hard drive slot filler panel (Carbon Black)

Filler panel – Used to cover an empty hard drive slot

Narrow Single-Ended SCSI-2 slot load DVD-ROM drive – 6X DVD-ROM read, 32X CD-ROM read (Pioneer DVD-303/304) – Has headphone jack and volume control

Slimline DVD-ROM/CD-RW combination drive (Carbon Black) – 12X CD-R write, 8X CD-RW re-write, 24X read CD-ROM, 8X read DVD-ROM

36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

73GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

Slimline DVD-ROM drive (Carbon Black) – 8X read DVD-ROM, 24X read CD-ROM

Slimline DVD-ROM drive (required for Windows orders) – 8X DVD-ROM, 24X CD-ROM

36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high

73GB hot-plug Ultra320 Wide Low Voltage Differential (LVD) SCSI hard drive (Carbon Black) – 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector

146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) – 10,000 RPM, 3.5-inch form factor, 1.0-inch high

128MB battery backed write cache (BBWC) memory board – 72-bit, DDR memory

512MB battery backed write cache (BBWC) memory board – 72-bit, DDR – Includes battery

2.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module for HP RX2600

256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module for HP RX2600

512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module for HP RX2600

512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module for HP RX2600

128MB battery-backed cache memory module board – Includes two attached battery packs – For Smart Array 5300 series controller, Modular Smart Array 500, or Modular Smart Array 1000

1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module for HP RX2600

HP RX2600 System processor board (Does NOT include the processor or processor power module)

HP RX2600 Advanced Data Guard (ADG) access module board

HP9000 RX2600 2-channel PCI-X RAID Smart Array 6402/128 U320 controller board – For Linux, Windows – Order 309520-001

HP RX2600 PCI backplane/riser board – Has four PCI slots

HP RX2600 SCSI backplane board – Has three connectors for hot-swap hard drives

Smart Array 5300 series Ultra3 SCSI LVD/SE controller board – Has two internal high density 68-pin Ultra3 SCSI connectors, two external very high density 68-pin Ultra3 SCSI connectors

Smart Array 5300 series Ultra3 SCSI LVD/SE 2-channel daughter board – Has two external very high density 68-pin Ultra3 SCSI connectors – Attached to the main controller board

RSTRD 313045-002N

FDDI LAN PCI network adaptor board

Dual fiber distributed data interface (FDDI) adapter – Has a dual-attach connection to a FDDI – With two SC duplex-style keyed connectors

100Base-TX PCI LAN adapter with one RJ-45 port

100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) – Has four RJ-45 connectors – Require one 64-bit PCI slot – For HP-UX operating system

155Mb/s ATM PCI LAN adapter with MMF connectors

155Mb/s ATM PCI LAN adapter with MMF connectors

Token ring (IEEE 802.5 networks) 4/16/32Mbs network interface board

Token ring (IEEE 802.5 networks) 4/16/32Mbs network interface board

HyperFabric2 PCI 4X fiber adapter – Includes interface and switch

HyperFabric2 PCI 4X fiber adapter interface and switch – For HP-UX operating system

HP 8-port MUX PCI Multiplexer interface board

HP 8-port MUX PCI Multiplexer interface board – Speeds up to 230,400 bps per port, 33MHz bus speed – Occupies one PCI slot – For HP-UX operating system

HP 64-port MUX PCI Multiplexer interface board

HP 64-port MUX PCI Multiplexer interface board

PCI 1000Base-T Ethernet network (LAN) adapter card – One port

1000Base-T Gigabit Ethernet network interface adapter board – Has one RJ-45 connector, requires one 64-bit PCI slot

1000Base-T Gigabit Ethernet network interface adapter board – Has one RJ-45 connector, requires one 64-bit PCI slot – For HP-UX operating system

2Gbps Fiber Channel host bus adapter – For 64-bit Linux and HP-UX – Dual channel, short wave, 64-bit, 133MHz PCI-X – Has LC connectors

2Gbps Fiber Channel host bus adapter – For 64-bit Linux and HP-UX – Dual channel, short wave, 64-bit, 133MHz PCI-X – Has LC connectors

Single channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 15 devices – Has one 68-pin very high density external connector, and one 68-pin high density internal connector – For HP-UX operating system

Dual channel Ultra160 LVD SCSI adapter board – Supports up to 30 devices – Has two 68-pin very high density external connectors and two 68-pin high density internal connectors – Requires one 64-bit PCI slot (Option A6829A)

Dual channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 30 devices – Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors – For HP-UX operating system

1000 Base-SX Gigabit Ethernet network interface adapter board – Has one duplex fiber optic connector, requires one PCI slot

1000Base-SX Gigabit Ethernet network interface adapter board – Has one duplex fiber optic connector, requires one 64-bit PCI slot – For HP-UX operating system

Single channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 15 devices – Has one 68-pin very high density external connector, and one 68-pin high density internal connector – For Windows or Linux operating systems

Dual channel Ultra160 LVD SCSI adapter board – Compliant with SCSI SPI-3, supports up to 30 devices – Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors – For Windows and Linux operating systems

1000 Base-SX Gigabit Ethernet network interface adapter board – Has one duplex fiber optic connector, requires one PCI slot – For Windows and Linux operating systems

Smart Array 6402 Ultra320 SCSI RAID controller – 64-bit, 133MHz PCI-X interface – Two internal or two external Ultra320 SCSI channels and 128MB of battery-backed memory

2Gbps Fiber Channel host bus adapter – For Itanium Servers running Windows Server 2003 – Single channel, short wave, 64-bit, 133MHz data rate – Has two rear panel LC connectors and two activity LEDs – Occupies one PCI-X slot

1000Base-TX LAN four port host adapter board – Supports all PCI bus configurations – Has four RJ-45 connectors – Requires one PCI slot – For HP-UX operating system

100Base-TX LAN host adapter board with one RJ-45 port – Requires one PCI slot – Includes the board, software, software license, and installation instructions – For HP-UX operating system

WAN adapter – Dual port X.25 PCI frame relay adapter card

PCA PCI X.25 interface board

WAN adapter – Two port X.25 PCI frame relay adapter card

Hot-swap redundant power supply – 650W

Intel Itanium 2 processor – 1.5GHz (McKinley, 400MHz front side bus, 6.0MB Level-3 cache) – Mounts on the system processor board